Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory 3Pos-Adj LV ShockWell-equipped for conquering your way around your local trails and beyond, this Factory Series mountain bike (MTB) rear shock features a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory 3Pos-Adj LV ShockWell-equipped for conquering your way around your local trails and beyond, this Factory Series mountain bike (MTB) rear shock features a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory 3Pos-Adj LV ShockWell-equipped for conquering your way around your local trails and beyond, this Factory Series mountain bike (MTB) rear shock features a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Remote SV Rear ShockFeaturing a dual piston (DPS) damper, an EVOL air spring as well as two-position remote actuation and adjustment, this Factory Series mountain bike (MTB) rear shock delivers uncompromised performance wherever your trail-riding adventure leads you. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish to complement your ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote SV Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Series Rear ShockEngineered for superb off-road performance, the Float DPS Factory Series Rear Shock from Fox Suspension offers excellent shock absorption and control on the toughest rides.This rear MTB shock features a Float DPS damper, which helps you perfect turns without cutting corners. Its DPS dual-piston system also combines exceptional bump compliance with smooth efficiency, so you can conserve your energy for when you need it most. Coming complete with three positions of adjustment, this is a superb upgrade for a more rider-tuned feel. Features: Finish: Genuine Kashima Coat Use: MTB Damper: DPS with three adjustment positions: Open/Medium/Firm modes Air Sleeve: One-piece EVOL LV air sleeve Piston Valve: Dual Piston valve Volume: Multiple options available Shock Actuation: Remote Mount: Trunnion Shock Size/Travel: 185x50mmTechnologies: DPS Damper: DPS damper with three positions - Open, Medium, Firm modes Dual Piston: Dual Piston valve design improves both rebound and compression flow EVOL LV Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 V4 Vented Floating Disc RotorCreated by Hope to get the best performance from your Tech 3 V4 disc mountain bike (MTB) brake, this Vented Floating Disc Rotor delivers consistent braking power as you’re attacking the toughest downhill trails and riding at your limit.Heat Dispersing Brake DiscWith its extensively vented design, this brake rotor effectively reduces its working temperature by up to 15%. This enables superior braking performance when things get tough on steep Alpine descents and the World's toughest downhill tracks.All-Weather PerformanceIt also brings you exceptional braking performance in wet conditions as its fins enable water and moisture to be shed consistently. This keeps the braking surface dry and ready for when you need to kill your speed for hurtling towards berms and picking your line through technical sections.Features: Material: Braking Surface: Laser Cut Steel; Central Floating Section: CNC Machined Aluminium Mount Type: 6-bolt Compatibility: Hope V4 brake disc caliper only Only Available In 203mm size All parts made and hand assembled in United Kindom (UK) Manufactuer's Part Number: Black: HBSP305:203:6N; Red: HBSP305:203:6RWeight: 283gPlease Note: Due to its thicker design, this rotor is not compatible with any other models of calipers in Hope's hydraulic disc range. It's specifically designed for use with the Hope V4 model only.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.