A good looking floor-to-ceiling bike rack that carries two bikes as standardCan be upgraded to carry four bikes; extra bikes kits are availableConstructed from beautiful furniture grade American red Oak from sustainable sources with a hand-rubbed oil stain finish to show off the grain of the woodMinimum ceiling height required is 7 feet / 2.13 metres and the maximum is 10 feet / 3 metres; assembled width is 14.5 inches / 37 cm and depth 9.5 inches 24 cmVinyl coated arms hold and protect your bike and are adjusted independently to fit many shapes and sizes of frameVelcro straps provided to stabilise the front wheel of your bikeHeld in place with a tension mounting system with a maximum recommended weight of 200 lbs / 90 kgsAll assembly hardware is included and some simple DIY is required
Oak racks come as standard with the fittings to hold two bikes but up to two more bikes can be added using extra kitsVinyl coated arms hold and protect your bike and can be independently adjusted to accommodate many shapes and sizes of frameThe front wheel of your bike can be stabilised with the Velcro straps providedAll assembly hardware is included
The Gear Up OakRak Floor-to-Ceiling 2 / 4 Bike Rack is a good-looking floor-to-ceiling bike rack that carries two bikes as standard and makes an ideal, neat and stylish storage solution for your bikes.Can be upgraded to carry four bikes; extra bikes kits are availableConstructed from beautiful furniture grade American red Oak from sustainable sources, with a hand-rubbed oil stain finish to show off the grain of the woodMinimum ceiling height required is 7 feet / 2.13 metres, and the maximum is 10 feet / 3 metres; assembled width is 14.5 inches / 37 cm, and depth 9.5 inches 24 cmVinyl coated arms hold and protect your bike, and are adjusted independently to fit many shapes and sizes of frameVelcro straps provided to stabilise the front wheel of your bikeHeld in place with a tension mounting system, with a maximum recommended weight of 200 lbs / 90 kgAll assembly hardware is included, and some simple DIY is requiredIt s constructed from beautiful furniture grade American red Oak from sustainable sources, with a hand-rubbed oil stain finish to show off the grain of the wood. Vinyl coated arms hold and protect your bike and are adjusted independently to fit many shapes and sizes of frame. Velcro straps provided to stabilise the front wheel of your bike. Its held in place with a tension mounting system, with a maximum recommended weight of 200 lbs / 90 kg.
The Gear Up Grandstand single bike floor is a very compact, convenient, and lightweight rack that holds the rear wheel of your bike in place. Produced from durable ABS plastic, the stand is weatherproof, making it ideal for outdoor use. The adjustable width suits most bikes and tyre sizes, from skinny 700c road rubber to 2.25" MTB tyres.
The multi-year Airflow short sleeve jersey is an active-level cycling jersey, with a Lycra arm grippers for maximum comfort and flexibility. The multi-year Airflow short sleeve jersey allows you to keep all your valuables safe and dry, with three rear pockets.Pattern: Active,Fabric: Birdseye fabric,Arm Gripper: Double Lycra,Hem Gripper: SG-10,Zipper: Plastic,3 back pockets,Relaxed rider cut.
The Airflow II socks are designed to offer you comfort and performance. Their anatomic cut design, including a central supporting tape and the seamless fabric with a built-in cushion, provides you with maximal comfort while keeping your leg right at place and supporting your ankle as you pedal at maximum speed. The gentle sowing keeps you cool as it wicks away any moisture, keeping you fresh!Short seamless socks with cushion.
Featuring a full length leg that covers/warms your knees and calves in cool weather conditions the Rideflo tights have what you need to stay comfortably active in the saddle whether you are commuting or out for a local club ride. The multi-layer dense foam and four way stretch chamois relieves pressure and allows for freedom of movement, keeping you chafe free and feeling comfortable in the saddle for hours at a time. Also available in a 3/4 knicker bib tight.220 gr/Lycra,Inner elastic waistband,DL ankle gripper,Self locking ankle zipper with reflective trim,B14 chamois.B14 PadAntibacterial fabric,High density foam,Moisture transference ,Maximum comfort.
Featuring a full length leg that covers/warms your knees and calves in cool weather conditions the Rideflo tights have what you need to stay comfortably active in the saddle whether you are commuting or out for a local club ride. The multi-layer dense foam and four way stretch chamois relieves pressure and allows for freedom of movement, keeping you chafe free and feeling comfortable in the saddle for hours at a time. 220 gr/Lycra,Inner elastic waistband,DL ankle gripper,Self locking ankle zipper with reflective trim,B14 chamois.B14 PadAntibacterial fabric,High density foam,Moisture transference ,Maximum comfort.
FSA Flowtron Dropper Seat PostThis top-quality seat post is specifically engineered for MTB use as it gives you a powerful and more reliable riding position. This Flowtron model takes its name from the fast, rolling flow trail in the Pacific North West and it lives up to its name by giving you outstanding performance exactly when you need it. It features strong alloy construction which delivers immense support while also defending against all the abuse that comes with trail-riding.Remote Activated MTB Dropper PostReady to dominate on every descent, this stunning component uses a forged shifter style remote with industry-first adjustable spring tension for you to tweak the level of feel and force. Furthermore, its remote lever gives you the ability to ride anywhere, so you can customise it to suit your specific riding style, the terrain conditions or your individual rider preferences. This is a perfect choice of upgrade for off-road riders who want to push their performance to the max and enjoy a more comfortable and controllable riding experience as you weave between the trails.Features: Material: Alloy Use: MTB Internal cable routing Two bolt clamp Shifter style remote lever with cable clamp 3-pin brass keyway systemBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2022)Designed for all-mountain and enduro racing, this Fork from Fox Suspension combines quality with lightweight stiffness for unrivalled durability. It features a GRIP damper with dual variable valve control and a Float EVOL air spring so you can adjust pressure and speed compression with ease. This fork also benefits from a Kashima coating for enhanced durability and long-lasting performance when tackling tough trails. Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.