Compatible with all Cateye front lights (excluding Nano, UNO and New Volt. The Helmet Mount allows you to light where you're looking and will fit almost all vented helmets. Please note: Cateye's new Volt range is not compatible with this mount. Cateye helmet bracket, compatible with current lights: AMPP 1100, AMPP 800, AMPP 500, AMPP 400 VOLT 1700, VOLT 800, VOLT 400 Sync Core HL-EL135
The OH-2400 FlexTight Brass Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Solid brass 22mm diameter bell can also be mounted with a light or computer FlexTight bracket. Available in black, gold or silver.Colour: Black / Silver / GoldSound Volume: 83.5dBHandlebar size: 22-32mmBell Diameter: 23mmWeight: 23g
The OH-2400 FlexTight Brass Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Solid brass 22mm diameter bell can also be mounted with a light or computer FlexTight bracket. Available in black, gold or silver.Colour: Black / Silver / GoldSound Volume: 83.5dBHandlebar size: 22-32mmBell Diameter: 23mmWeight: 23g
The OH-2400 FlexTight Brass Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Solid brass 22mm diameter bell can also be mounted with a light or computer FlexTight bracket. Available in black, gold or silver.Colour: Black / Silver / GoldSound Volume: 83.5dBHandlebar size: 22-32mmBell Diameter: 23mmWeight: 23g
The Cateye Reflex Auto Rear Light has been produced with built in reflectors that exceed international standards and automatically turns on & off using light and motion sensors. The Reflex Auto will automatically turn on whenever both darkness and motion are detected by the motion and light optic sensors, providing the rider safety both while the light is turned on and while functioning solely as a reflector.5 LEDsGreater than 180-degree visibilityAutomatically turns on / off by light and motion sensorsEmits light for 50 seconds after the bike stopsBuilt-in reflectors that meet highest government standards (USA, Great Britain, Europe and Japan)OptiCube lens technologyAAA alkaline battery x 25 modesMode memory functionSP-5 bracket (ø21.5-31.8mm) and Rear rack bracketWeight 82gDesigned in JapanRUNTIME:Constant mode: 30hrsFlashing mode: 100hrsRapid mode: 60hrsLong-life mode: 120hrsPulse mode: 30hrsTECHNOLOGIES:Auto Light - Auto on/off controlled by motion & optical light sensors to automatically turn the light on when darkness of motion is detectedReflector - Our reflector technology exceeds the highest government standards around the worldOpticube - Our proprietary OptiCube lens technology maximizes brightness for greater visibilitySide Visibility - Provides visibility from the side to increase safetyAll Weather - Can be used in rainy weather
Designed for riding in all weathers, the Commuter Women’s Reflex Jacket is made to deliver Castelli’s leading cycling garment design to your daily commute whilst looking great too. Castelli wanted to create a commuting jacket that provided excellent visibility at night but wouldn’t be covered in silver reflective bands that look out of place off the bike. The solution is a rmaterial with a reflective micro print that provides 360° visibility in low light but won’t look out of place when you turn up to the office.The fabric is also waterproof with a 20,000mm water column and a 20,000 MVTR breathability rating, meaning a good amount of moisture will escape and you won’t feel damp when you take the jacket off.The Reflex Jacket has an inner gaiter at the waist to seal out the wind, or you can leave it open for a bit more ventilation in warmer weather. The other great thing about the gaiter is that it means the jacket hangs straight instead of bunching like with the internal elastic on many cycling jackets.Velcro wrist closures also introduce ventilation and can seal against gloves for cold mornings and late evenings.Key Features3-layer reflex reflective fabric all over,20,000mm water column and 20,000 MVTR breathability,Cut to fit over normal clothes with longer back for extra cover,No-sew bottom hem for clean look,No-sew external zipper flap,Inner gaiter to block out cold air at waist,Velcro wrist closures,-2° – 15°C / 28° – 59°F,Weight: 285g (S).
Designed for riding in all weathers, the Commuter Reflex Jacket is made to deliver Castelli’s leading cycling garment design to your daily commute whilst looking great too.Castelli wanted to create a commuting jacket that provided excellent visibility at night but wouldn’t be covered in silver reflective bands that look out of place off the bike. The solution is a rmaterial with a reflective micro print that provides 360° visibility in low light but won’t look out of place when you turn up to the office.The fabric is also waterproof with a 20,000mm water column and a 20,000 MVTR breathability rating, meaning a good amount of moisture will escape and you won’t feel damp when you take the jacket off.The Reflex Jacket has an inner gaiter at the waist to seal out the wind, or you can leave it open for a bit more ventilation in warmer weather. The other great thing about the gaiter is that it means the jacket hangs straight instead of bunching like with the internal elastic on many cycling jackets.Velcro wrist closures also introduce ventilation and can seal against gloves for cold mornings and late evenings.Key Features3-layer reflex reflective fabric all over,20,000mm water column and 20,000 MVTR breathability,Cut to fit over normal clothes with longer back for extra cover,No-sew bottom hem for clean look,No-sew external zipper flap,Inner gaiter to block out cold air at waist,Velcro wrist closures,-2° – 15°C / 28° – 59°F,Weight: 319g (M).
The Nano Flex Pro Race Bibshort is the latest iteration of Castelli’s Omloop thermal short.Taking inspiration from pro riders cutting down knee warmers at Omloop Het Nieuwsblad so they ran to just above the knee, the Omloop was cut longer than normal bibshorts with an extra 10cm of fabric adding a lot of warmth, while also doing away with the need for restrictive gripper elastic. This new bibshort take the same idea but with an updated design for even greater versatility.The Nano Flex Pro Race Bibshort is made from Castelli’s Nano Flex 3G fabric. This offers the same warmth, softness, and breathability as the fabric used in the original Omloop but it is also water repellent. So now this short ideal for cool and dry days, but it is also superb for wet weather.Reduced seaming eliminates points where water can enter the short and minimises abrasion. The mesh bibs don’t add warmth so you can dress your upper body for the conditions without worrying about moisture build up.The bibshort uses Castelli’s Progetto X2 seat pad. This pad features two isolated layers that work in tandem with your body and saddle to eliminate friction while still offering substantial cushioning where it’s needed most.It’s still a pro tool: this short is identical to the mode supplied to Team Ineos. Key Features: Nano Flex 3G fabric is water repellent, stretchy and warm thanks to luxuriously soft brushed inside,Reduced seams for comfort and to prevent water from entering shorts during wet rides,Knee-length cut for extra warmth that doesn’t require gripper elastic,Highly ventilated mesh bib straps,Progetto X2 Air seamless seat pad for long hours in the saddle,12° – 20°C / 54° – 68°F,Weight: 205g (Large).
The Castelli Thermoflex 2 Leg Warmers are perfect if you’re don’t need wet weather protection and are looking for an incredibly soft and insulating warmer that uses luxurious fabric to keep you protected in cooler climes. On the inside of the Thermoflex 2 fabric, a super soft finish and the optimal loft have been achieved through Castelli’s meticulous research and development. The fabric feels phenomenally comfortable against the skin and the loft traps just the right amount of air above the skin to keep your heat regulated over a wide range of autumn and winter conditions. The discreet black embossed Castelli wordmark logos on these warmers is a nice touch and means that they can be worn with a wide range of jerseys. The dual-sided silicone gripper on the upper edge keeps the warmers securely in place whilst the single-seam construction and flatlock stitching contribute to a low-profile look and feel. Key Features: Thermoflex 2 fabric for exceptional warmth and softness, Minimal seam construction for aesthetic versatility and freedom of movement, Easily packable into a pocket, Highly breathable but also insulating, Optimal temperature range is 8°C – 18°C..
The Castelli Nano Flex 3G Arm Warmers are a stalwart of your winter cycling kit – rain repellent, windproof, warming and luxuriously comfortable, this latest evolution of the Nano Flex technology is Castelli’s best yet.The Nano Flex 3G fabric used across these arm warmers utilises a combination of newly updated durable water repellent (DWR) treatment and mechanical heat treatment to give previously unheard-of levels of rain protection. Light rain beads off the fabric, keeping you dry when those inevitable rainy spells descend.On the inside of the Nano Flex 3G fabric, a super soft finish and the optimal loft have been achieved through Castelli’s meticulous research and development. The fabric feels phenomenally comfortable against the skin and the loft traps just the right amount of air above the skin to keep your heat regulated over a wide range of autumn and winter conditions.This latest update to the Nano Flex fabric not only reflects Castelli’s ongoing commitment to offering you the very best garment quality but crucially means more time enjoying yourself on the bike.The flat-lock stitching and single-seam construction keep the profile of the warmers low and the stretch is optimised for maximal freedom of movement. A dual-sided silicone gripper at the upper end secures the warmers in place. The compact size of the warmers makes them easy to stuff into rear pockets when conditions lighten up.Key Features:Newly updated Nano Flex 3G fabric for exceptional warmth, softness and protection from the rain,Minimal seam construction for aesthetic versatility and freedom of movement,Easily packable into a pocket,Highly breathable,Optimal temperature range is 8°C – 20°C.
The Castelli Nano Flex 3G Knee Warmers are a stalwart of your winter cycling kit – rain repellent, windproof, warming and luxuriously comfortable, this latest evolution of the Nano Flex technology is Castelli’s best yet.The Nano Flex 3G fabric used across these knee warmers utilises a combination of newly updated durable water repellent (DWR) treatment and mechanical heat treatment to give previously unheard-of levels of rain protection. Light rain beads off the fabric, keeping you dry when those inevitable rainy spells descend.On the inside of the Nano Flex 3G fabric, a super soft finish and the optimal loft have been achieved through Castelli’s meticulous research and development. The fabric feels phenomenally comfortable against the skin and the loft traps just the right amount of air above the skin to keep your heat regulated over a wide range of autumn and winter conditions.This latest update to the Nano Flex fabric not only reflects Castelli’s ongoing commitment to offering you the very best garment quality but crucially means more time enjoying yourself on the bike.The flat-lock stitching and single-seam construction keep the profile of the warmers low and the stretch is optimised for maximal freedom of movement. A dual-sided silicone gripper at the upper end secures the warmers in place. The compact size of the warmers makes them easy to stuff into rear pockets when conditions lighten up.Key Features:Newly updated Nano Flex 3G fabric for exceptional warmth, softness and protection from the rain,Minimal seam construction for aesthetic versatility and freedom of movement,Easily packable into a pocket,Highly breathable,Optimal temperature range is 12°C – 20°C.
The Castelli Nano Flex 3G Leg Warmers are a stalwart of your winter cycling kit – rain repellent, windproof, warming and luxuriously comfortable, this latest evolution of the Nano Flex technology is Castelli’s best yet.The Nano Flex 3G fabric used across these leg warmers utilises a combination of newly updated durable water repellent (DWR) treatment and mechanical heat treatment to give previously unheard-of levels of rain protection. Light rain beads off the fabric, keeping you dry when those inevitable rainy spells descend.On the inside of the Nano Flex 3G fabric, a super soft finish and the optimal loft have been achieved through Castelli’s meticulous research and development. The fabric feels phenomenally comfortable against the skin and the loft traps just the right amount of air above the skin to keep your heat regulated over a wide range of autumn and winter conditions.This latest update to the Nano Flex fabric not only reflects Castelli’s ongoing commitment to offering you the very best garment quality but crucially means more time enjoying yourself on the bike.The flat-lock stitching and single-seam construction keep the profile of the warmers low and the stretch is optimised for maximal freedom of movement. A dual-sided silicone gripper at the upper end secures the warmers in place. The compact size of the warmers makes them easy to stuff into rear pockets when conditions lighten up.Key Features:Newly updated Nano Flex 3G fabric for exceptional warmth, softness and protection from the rain,Minimal seam construction for aesthetic versatility and freedom of movement,Easily packable into a pocket,Highly breathable,Optimal temperature range is 8°C – 18°C.