Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Ziptie Clip-On Front MudguardThe EVO Ziptie Front Mudguard from Mudhugger is a stiff and durable mudguard that's held in place with zip ties. And, it's ideal for use with downhill (DH) and enduro bikes in all weather and trail conditions.Are you ready? The world's fastest mudguard is evolving, the Mudhugger EVO Ziptie, designed with the help of DH World Cup and EWS racers. With the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost (not reverse fork brace forks though). Optimum length, not too short, no longer than needed. Plus, it features a subtle kicker to keep the length as short as possible without compromising spray protection and is strong enough for DH racing at the highest level. Features: Length: 515mm - Rear extension 330mm, front extension 185mm Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full compression 100% recycled PP Designed, made and packed in the UK Weight: 120g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: 6mm Tool clip (bag of 5),Fits workshop toolboard QKBTB or QKSTB,Zinc plated,Safety end caps,Perfolock.
New Hi-Bike boot fitting rack comes fully assembled. Designed to carry bikes above the number plate & lights. If your bikes cover up the number plate & lights then we recommend you fit an additional lighting board to comply with road laws. 3 Bike High Lift Rear Carrier (Max 45kg) Quick and Easy to install and remove Fits Most Cars Double top straps 25kg Breaking Strain Patented suspension system protects bIke frame Tested and approved to European Regulation XP R18-94-4:28 1% Manufactured in Italy Use a lightboard if your rear lights are covered Purchase AVR81 for womens and full suspension bikes
This deluxe roof rack is manufactured in steel, the bike sits into a wheel channel & the adjustable cycle security locking clamp fits to the bikes down tube for a secure fastening. Fits to most roof bars 60 x 55mm.Key Features:Bike channel ensures your bike is centrally mounted,Maximum tyre width 55mm,Suitable for maximum of 70mm roof bars,TUV Tested to DIN Standards,Straps tested to 150 kg.,Two Piece Rail for easy stocking,Powder Coated Anti Rust Treatment,Use with Roofbars up to 60mm,100% Manufactured in Italy,Lockable..
The Venezia 4 bike carrier is constructed from lightweight aluminium & fully assembled. We recommend that if you've covered up your vehicle number plate & lights then you fit an additional light board to comply with road vehicle lighting laws. Key Features:4 Bike Rear Carrier (Maximum weight 45kg),Double upper straps, the most stressful point,Lower straps anti-bounce system,All straps tested at 250 kilos each,All 6 tempered hooks tested at 350 kilos each,Steel buckles,Patented shock absorbing frame support,30 x 2,8 mm diameter aluminium tube,Doubly safe with extra safety strap fixed to frame,Fully assembled, no tools required,Quick and easy to fit and remove,Folds flat for storage,Tested and approved to XP R18-904-4:2008,Purchase AVR810 for womens and full suspension bikes .
Milano high rise 3 bike boot fitting rack is an anodised aluminium rear bike carrier, made from 30mm tubing. We recommend that if you've covered up your number plate & lights, you fit an additional light board to comply with road vehicle lighting laws.Key Features:Top Quality 3 Bike Rear Carrier (Max 45kg.),Quick and easy to install and remove,Hi tech aluminium 30x2.8mm tubing - lightweight but very Strong,Fully assembled frame, fits most cars,Double top straps 250kg Breaking Strain,Patented suspension system protects bIke frame,Tested and approved to European Regulation XP R18-904-4:2008,100% Manufactured in Italy,Use a lightboard if your rear lights are covered,Purchase AVR810 for womens and full suspension bikes,.
Adjustable handlebar stem quill fitting 10-50 degrees adjustment, black finish.
Especially designed fitting to allow the KLICKfix handlebar bar adapter to be mounted via a traditional quill stem.Compatible with 22-26mm diameter quill stems.Can be rotated 180 degrees to give a low or high level position for your bag or basket..
The RRP ProGuard Bolt-On Fox 40 Fitting Kit is for use with the ProGuard Bolt-On Mudguard and Pre-2021 26" and 27.5" Fox 40 Suspension forks. The Kit allows you to fit the ProGuard Bolt-on to the fork, giving you excellent protection from the elements, while also protecting your fork seals and lowers thanks to the bolt on design that forgoes the use of zip ties or velcro.
8-Speed SM-S500A for SG-S501 11-Speed SM-S700 for SG-S700