LifeLine Digital Pressure GaugeThe LifeLine Digital Pressure Gauge provides exceptional accuracy and hassle-free performance. Enabling to you achieve the perfect pressure rating for your tyres, it not only can give you an accurate pressure reading within 3 seconds, but is compatible with Presta and Schrader valves while also featuring a 'Bleed Valve' enabling you to fine-tune the inflation.Perfect Inflation PressureTo increase accuracy and functionality even further it features both 'Calculation Mode' enabling you to measure the inflation of the tyre and 'Adjustment Mode', which allows accurate pressure measurement as you use the bleed valve to achieve the perfect inflation value. Features: Max Pressure: 160 psi Valve Type: Presta & Schrader Pressure Adjustment: Bleed Valve Inflation Units: PSI, BAR, KPA, KG CM2 Display: LCD Backlit Power Saving: Auto Power-OffBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Wallmount Bike Storage HangerA wall mounted hanger for your bike. Mount the hanger on the wall at the desired height and secure either front or rear wheel in the retainer bracket for easy storage of your bike.Features:Saves valuable floor spaceStore your bike in a closet, behind the door or somewhere out of sight Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 110mm Boost Conversion SpacerMade to adapt your Hope Pro 4 100mm to Boost sizing, this genuine Hope Spacer is easy to install and helps ensure reliable handling when taking on tough and challenging routes. It attaches easily to the drive side of your hub and expands the axle by 10mm.Features:Genuine Hope SpacerTo maintain correct wheel centring, it will need re-dishing by 5mm.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus DHF112 Boost MTB Hub End Caps (15mm)These Boost Hub 15mm end caps are specifically designed to fit all Vitus Sentier, Mythique and Rapide front hubs.Features: Compatibility: All Sentier/Mythique & Rapide Vitus front hubs Part Number: DHF112Buy Vitus Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus MD4R-K68R Quick Release Freehub BodyThis freehub body is specifically designed for use on Vitus MD4R and K68R quick release (QR) rear hubs. Ideal for replacing your old or worn-out existing freehub body. Genuine Vitus spare part.Features: Compatibility: Vitus MD4R and K68R QR rear hubs Genuine Vitus spare part Part Number: VMD4RQRRHUBFBBuy Vitus Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Pawls & SpringsThese pawls and springs are designed as a direct replacement for the ones that come as standard on Nukeproof Neutron V2 hubs. This set contains four pawls and four springs, plus a plastic cover for the freehub.Features: Use: MTB Compatibility: Nukeproof Neutron V2 hubs Included: 4x pawls, 4x springs and a plastic cover for the freehub Nukeproof Part Number: NUKNEUV2PSGOLDBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Front Mountain Bike Hub Boost ConversionThis conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 15mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 15x100mm hub to be converted to 15x110mm Boost spacing. Genuine Brand-X spare parts.Features: Compatibility: Most 15mm non-Boost hubs Includes: 2x axle spacers, 6-bolt rotor spacer and rotor bolts Conversion: 15x100mm to 15x110mm Manufacturer's Part Number: BXFBCBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Rear Mountain Bike Hub Boost ConversionThis conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts.Please note: Your wheel may need redished to work in a Boost frame.Features: Compatibility: Most 142mm non-Boost hubs Includes: 2x axle spacers, 6-bolt rotor spacer and rotor bolts Conversion: 142x12mm to 148x12mm Manufacturer's Part Number: BXRBCBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Trail Wheelset Front QR End CapsThis end cap set includes two front QR end caps for use on the Brand-X Trail front wheel. Genuine Brand-X spare parts.Fitment Instructions: Pull off old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike.Features: Compatibility: Front QR end caps for Brand-X Trail wheel Single or Pair: Pair Manufacturer's Part Number: BXTWFQRECBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Trail Wheelset Rear QR End CapsThis end cap set includes two rear QR end caps for use on the Brand-X Trail rear wheel. Genuine Brand-X spare parts.Fitment Instructions: Pull off old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike.Features: Compatibility: Rear QR end caps for Brand-X Trail wheel Single or Pair: Pair Manufacturer's Part Number: BXTWRQRECBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Trail 12mm Front End CapsThis end cap set includes two front 12mm end caps for use on the Brand-X Trail front wheel. Ideal for replacing your worn out existing end caps or for giving your front wheel a refresh. Genuine Brand-X spare parts.Fitment Instructions: Pull off the old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike.Features: Use: Mountain Bike (MTB) Compatibility: Front 12mm end caps for Brand-X Trail wheel Single or Pair: PairBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Generator 150x12mm Rear AxleGenuine Nukeproof replacement parts.Features: Generator 150x12mm Rear AxleBuy Nuke Proof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Token MTB Stainless Steel QR SkewersGenuine Token replacement parts.Features:MTB Alloy QR SkewersBuy Token Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Generator 20mm Sub AxleFuelled by a passionate team of riders, racers and mechanics, Nukeproof benefits from a wealth of knowledge and experience. Using this knowledge and experience Nukeproof only produce products that we want to ride on and rely on every day!Features:Genuine replacement Sub Axle for the Nukeproof Generator 20mm Hub.Material: 7075 alloy.Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche X-Light Alloy Quick Release Skewer SetMade with CNC machined Aluminium, the X-Light Alloy Quick Release (QR) Skewer Set have ergonomically shaped handles with a hard-wearing coating. Miche added the ergonomic shaping to these lightweight QR skewers so you can quickly and easily remove and install your wheels with minimal effort, making servicing and transporting your bike simple and efficient.Features:Material: CNC machined Alloy Use: Road only Single or Pair: Pair Weight: 105g (pair)Buy Miche Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.