Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Otocon HelmetA tough and durable trail-ready mountain bike helmet, the POC Otocon Helmet is remarkably light and yet offers superb head protection. From the challenges of enduro racing to fun laps of bike parks, it's ready to go. Safety FirstMountain biking is tough on both the body and your equipment. And none more so when you're unfortunate enough to crash. However, the Otocon Helmet is here to keep you safer when it all goes a bit wrong. Reliable head protection comes via the Otocon's dual-material construction. In the event of an impact to the head, a combination of EPP foam lower and EPS foam upper provide the perfect degree of energy dissipation, helping prevent injury. A tough and durable outer shell works with moulded Aramid bridges to enhance both structural strength, integrity and improve penetration protection. This is one tough helmet. While the peak is great for keeping out sun and rain, it's also safe, breaking away from the helmet body in a crash, reducing damaging forces upon your neck. Meanwhile, the chin guard features a removable grill, offering protection from mud and dirt in winter but easily removed to boost airflow in warmer weather or add cooling when on a tough enduro transition stage. Cool ComfortBe it downhill runs or a tough enduro, it's all very well feeling protected but you certainly don't want that to compromise comfort. Thanks to the excellent ventilation, with internal air channels to maximise airflow, you'll enjoy all-day mountain bike riding comfort.Race Lock Integrated AdjusterA secure helmet is a safer helmet. And with the Race Lock Integrated Adjuster, you can dial in the perfect fit quickly and easily. This keeps the helmet firmly in place over all types of terrain and rock-solid in the event of a crash. FeaturesDual-material liner - EPP in the lower part of the helmet improves durability and sustainability, while an EPS upper keeps weight lowInjection-moulded liner - lower part of the liner features an injection-moulded cage for extra strength and stabilityRace Lock integrated adjuster - easy to find a comfortable, secure fitBreakaway peak - will break away in a fall to reduce potential neck injuryInnovative airflow channels - channels through the helmet work to keep the head cool at both high and low speedsRemovable cheek pads - can be easily removed after a crashChin guard features a removable grillWeight: 700g (M)Certification - EN 1078Buy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Cerebel Raceday HelmetThe Cerebel helmet has been developed in close collaboration with Garmin-Sharp Pro Cycling team, Volvo Car Group and WATTS Lab.The Cerebel is a compact aero road helmet, designed and engineered to improve aerodynamic performance. Extensive wind tunnel testing and CFD simulations shows that the Cerebel excels in dynamic and varying body positions, which in turn benefits upper body movement and overall lactate clearing efficiency compared to a static TT position.The helmet's rear is made of soft molded EVA covered in aerodynamic fabric for reduced drag and increased comfort.The Cerebel is equipped with a visor from Zeiss and uses a unique magnetic system to stay firmly in place. The visor tint is specifically developed together with Zeiss to enhance the contrast of the road surface, allowing the rider to spot any irregularities or obstacles in time.POC’s unique magnetic lens attachment system is designed to ensure that the lens is correctly positioned for low drag, and it also allows for quick attaching and removal.Features: High performance EPS liner, optimized in density. Aerodynamically superior design. Soft molded EVA covered in aerodynamic fabric. Detachable visor from ZEISS. POC's unique magnetic lens attachment system. Size adjustment system. Size: Medium (54-60cm) Weight: 380g Certifications: EN 1078, CPSC 12.03This helmet conforms to, or exceeds EU Standards only.Buy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Pop 16 has been designed for adventures. Our internal cables minimise the risk of potential incidents and our aluminium brake levers have been designed to be operated by little fingers. We’ve added non-slip pedals, carefully colour matched to the bike design and puncture protection tyres to keep your little one moving!The fun colour scheme and classic cream frame make this a stand out piece, and results in a bike that is as unique as the rider.Key Features:Aluminium frame; for your child's first experience of cycling an aluminium frame is ideal it is lightweight, easy to handle and manoeuvre,Internal cables; hides the cables away by running them through the frame minimising the risk of potential accidents and helps to create a clean simplified design,Rigid cro-moly forks: designed to be strong and lightweight,Aluminium V-brakes; fitted for an improved braking performance,Front V-brake modulator; when your child applies the front brake the modulator regulates the force that goes down to the front v-brake resulting in smoother braking,Aluminium/resin brake levers; can be easily operated by little fingers fitted with an adjustment screw to fit to smaller hands,Lo-rise handlebars; based on market research parents of older children preferred handlebars with a lower rise that would give an improved riding position but, still allow their children to be more aware of their surroundings,Narrow 1.5 tyres with puncture protection and a modern style tread pattern suitable for riding on all surfaces, cleverly coloured for fun,Aluminium rims; give an improved surface for the brake blocks to brake against,Junior non-slip pedals; fitted with rubber pads which prevent feet slipping off. Each pair of non slip pedals is carefully colour matched to fit the bike design,Double chain guard; protects your child's fingers from the sharp edges of the chain,Rear mudguard; an essential piece of kit designed to keep your child clean from any dirt picked up by the rear tyre,Graphics applied under a clear coat; by applying the bike graphics underneath a clear lacquer they will remain undamaged for years to follow,Colour co-ordinated saddles, grips, cables, tyres; at Raleigh we take great pride in designing our Children's range, ensuring that each component - however small is matched to the bike design..
Get the edge on the conditions on winter training rides in the Ventral Tempus Mips. With the same trusted protection and fit as the Ventral Air Mips, and with the addition of a fully covered shell for complete wind and rain protection, this helmet is ideal for winter training. High visibility colorways and the addition of reflective detailing work to enhance visibility in low light. Features include an optimized EPS liner for low weight, a fully wrapped unibody shell that enhances structural integrity and Mips rotational impact protection.MIPS IntegraThe latest technology from brain protection specialists MIPS enhances rotational impact protection.EPS linerThe EPS liner is optimized to provide crash protection at a low weight.Fully covered PC ShellThe fully covered unibody PC shell gives wind, rain and snow protection, and improves structural stability.Adjustable 360° FitA lightweight 360° adjustment system makes it easy to find a secure, comfortable fit.Internal Airflow ChannelsUniquely designed internal airflow channels provide ventilation22° Trailing EdgeResidual air travelling around the helmet is controlled by a 22° aero trailing edge: the perfect angle for minimizing turbulence.Reflective DetailingReflective detailing makes it easier for others to notice you while riding in low light.
The Oseus VPD Tee gives the highest level of protection for modern riders on bikes capable of anything. Ideal for downhill and bike park use, the short-sleeved armour gives full torso and shoulder protection, and thanks to clever placement of the zip, there's no break in protection across the front of the chest. Constructed from a soft and flexible fabric, the tee can be worn next to the skin for absolute protection. A zip on the side ensures there is no need for a break in protection on the chest, so that the back, chest and ribs are all be fully protected. The thicker protectors are ventilated for comfort and are fully flexible for exceptional freedom of movement. Wicking materials and a 3D mesh move moisture away from the body, keeping you dry and comfortable. Storage pockets are included on the back, including one secure zipped pocket for a lift pass.Product Details:Oseus VPDA thicker yet highly flexible and well-ventilated protector certified to the toughest standards.Complete torso protectionPads cover the chest, back and shoulders.Zip-free chestA single VPD plate covers the whole chest; there's no break in protection for a zip.Side zippersZippers on each side from the waist to the underarm make it easier to get the tee on and off.3D MeshA 3D mesh material enhances ventilation.Wicking fabricsAllow moisture to move away from the body for dryness and comfort.Rear storage pocketsZipped card pocketHanger loop
The ultimate in lightweight full-face protection, the new Otocon is a highly ventilated helmet made for the pressures of enduro. A ventilation design that directs air through the helmet helps keep you comfortable whether racing downhill or giving full effort uphill. Features including a patented breakaway peak, the integrated Race Lock adjustment system and a dual-material liner with parts in multi-impact EPP, work together to extend protection and comfort for all kinds of riding. Removable cheek pads and a removable grill over the mouth give more flexibility to control ventilation, ideal while riding the climbing sections during long enduro races.REMOVABLE GRILLThe grill protects the face from mud splashes and it can be removed for better airflow in warmer conditions.HIGHLY VENTILATEDVentilation is optimized to channel air through the helmet.Dual-material linerEPP in the lower part of the helmet improves durability and sustainability, while an EPS upper keeps weight low.Injection-moulded linerThe lower part of the liner features an injection-molded cage for extra strength and stability.PC ShellThe outer shell is constructed from PC to give exceptional durability.Race LockThe Race Lock integrated adjuster makes it easy to find a comfortable, secure fit.Breakaway peakA patented breakaway peak will snap off the helmet in a fall, enhancing neck protection. The smooth underside is shaped to house a GoPro mount.Highly ventilatedVentilation is optimized to channel air through the helmet for comfort at both high and low speeds.Removable cheek padsCheek pads are easy to remove while riding, giving more ventilation when on the climbs between enduro race stages.Removable grillThe grill in the chin piece protects the face from mud splashes. It can be removed for better airflow in warmer, drier conditions.
The Cuda Trace is our newest range of pedal bikes combining the affordability of our previous Leisure range with the weight and quality of our performance range. The result is a great lightweight bike at a great price!The contact points on a childrens bike are very important which is why we have ensured all our Trace bikes have:Short reach alloy brake levers to make pulling the brakes possible,Short cranks and lower bottom bracket to help with pedal effiency,Narrower saddle to keep the hips aligned,Lightweight for better handling,Multi terrain tyres to make all adventures possible.
The Chris King ThreadFit 24 Bottom Bracket elevates your ride experience to a whole new realm. It’s not only phenomenally durable but fully-serviceable and crucially, silent. If you value longevity and a smooth ride day in, day out, then this is an indispensable upgrade to your bike.Bred from over 30 years of bearing development, the ThreadFit Bottom Bracket has been explicitly constructed as the best possible housing for your cranks. In line with Chris King’s guiding ethos, the ThreadFit is built to outlast your material use of it. Rest assured that with a 5-year warranty and tolerances usually only employed in aerospace components, this is a truly unrivalled bottom bracket.The meticulous care and attention invested into the production of each and every ThreadFit engineered, manufactured and assembled in-house at Chris King’s HQ in Portland, Oregon reflects Chris King’s lasting commitment to quality and environmentally conscious manufacturing. Bike disciplines, trends and fashions change but you’ll never go amiss with a ThreadFit Bottom Bracket.Chris King’s legendary steel bearings and heat-treated, surgical-grade steel races not only form a perfectly integrated system but actually become smoother as they burnish with use – wearing in, rather than wearing out. In contrast to many other manufacturers, Chris King has complete control over every aspect of production, meaning that they can make bearings in-house to a specification that simply wouldn’t be achieved otherwise.What all of this means for you is less time servicing your bike and more time enjoying riding it, with the added bonus of silky-smooth, soundless movement. Creaky cranks are a thing of the past with the ThreadFit.Stock size is for a standard 24mm axle ( Shimano Standard) and a 68 - 73mm shell width. We stock a range of conversion kits that allow our ThreadFit 24 to be used with a wider selection of road and mountain bike cranksets and shell widths.Key FeaturesEngineered, manufactured and assembled in Portland, Oregon USA,5-year built-to-last warranty,Legendary made-in-house steel bearings,Easily serviceable with an integrated grease injection system,Find your fit with a wide range of conversion kits.
Assos' warmest most protective regularFit bib tights engineered to ensure no amount of weather interrupts your winter program. The MILLE GT Ultraz Winter Bib Tights are constructed with an arsenal of winterproof textiles to deliver unmatched levels of insulation breathability and weather resistance. We built upon the highly insulating platform that’s used in our standard Winter Bib Tights but then added a second layer to the exterior for more protection. Since weather can come from all sides we charted 360º protection and comfort to ensure that the element-facing section of your legs and glutes remains protected from snow rain wind and low temperatures while the backs of the legs benefit from added breathability and comfort in this high-flex zone. To boost the Ultraz Bib Tights’ performance we’ve pre-shaped and sewn the fabric panels to fully wrap and support the upper leg muscles knees and calves while in motion where they flex with each pedal stroke. 81%PA 18%EA 1%PL
Titanium is a wonderful material for a handlebar. Not as light as carbon but for a little weight you get an unparralled ride. Strength and beauty count for something as well. This bar will look good and ride well on your bike for years. Built for 31.8mm stems, no shims are used for clamping the Thomson Titanium bar. The very best bar you can buy for a rigid MTB
Key Features:Castelli-exclusive GORE-TEX INFINIUM™ WINDSTOPPER® 205 Warm brushed water-resistant fabric on front-facing surfaces,GORE-TEX INFINIUM™ WINDSTOPPER® 203 Stretch on rear-facing surfaces for greater stretch and breathability,Taped shoulder seams for extra rain protection,Top- and bottom-opening YKK® Vislon® zipper for easy sliding, covered for additional wind and rain protection,Zippered ventilation opening on side of chest,3 rear pockets,Reflective panel at bottom of pockets.
With a lightweight main shell optimized for waterproof performance while still deliveringoptimum levels of breathability, the Tahoe 8.1 Waterproof Jacket is also equipped withan adjustable storm hood and plenty of storage compartments, making it an ideal additionto your winter kit bag.Construction• The waterproof main shell (8k waterproofness and 3k breathability) is optimized for the optimum blend of breathability and protection against wet weather.• Fully tape-welded seams for guaranteed waterproof performance.Key Features:• Stretch panels on the underarms, the sternum zone and the yoke for enhanced freedom of movement and comfort, especially in the riding position.• Zippered underarm ventilation openings for effective body temperature control.• Waterproof zippered front pockets and single chest pocket for safe storage of small personal items.• Premium YKK waterproof zips for durability.• Shock chord waist adjustment keeps the garment in position and ensures a personalized fit.• Bonded helmet-compatible storm hood with an adjustment system for an optimized fit.• Inner fleece lining on collar for enhanced rider comfort.• An extended rear hem provides greater coverage, protecting against mud and water• Articulated sleeves ensure greater freedom of movement and optimized fit.
For riders who need the legendary smooth rolling quality of Chris King hubs for use in the high impact demands of enduro, DH, freeride, and slope-style we developed our ISO Large Diameter (LD) front hub. Built for gravity enthusiasts, our ISO LD front hub has been ridden to multiple downhill world championships and has rolled countless riders to the top step of the podium.Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.Key Features:Engineered, manufactured and assembled in Portland, Oregon USA,5-year built-to-last warranty,Legendary made-in-house angular contact bearings,Easily serviceable and completely re-buildable with our Chris King Hub Service Tool,Available in 9 beautifully anodized colors,Responsibly lightweight,Made to fit either a 15mm, 20mm or Lefty® LD thru axle,Easily convertible with a new axle between a 15mm, 20mm or a Lefty® LD thru axle,Ceramic bearing upgrade available,Matte Available in 32h.