The Fat Face Fender is the new version of Mucky Nutz' Bender Fender but this version is pretty special as it is designed specifically for use on Fat Bikes.Fits as close as possible to the knobbly bits for optimum 'muck' catching.Can be used on all wheel sizes.Protects your fork crown from getting caked.It's the lightest front Fat Bike mudguard available.Weight: 75gThe biggest difference between this version and the standard MTB version is that is has 4 arms and split lines, this is to help the mudguard's extra length curve to give you added protection from mud, sand or snow. The 4 arms also provide the guard with added strength which it needs due to its slightly thicker build.
Keep yourself protected from dirt and spray during the winter with the Topeak Defender M1 front mudguard. Compatible with all standard front forks including reverse arch designs. The unique quick release attachment system integrates seamlessly allowing you to get a quick and perfect fit every time. Suitable for 26" wheels. Not compatible with 29" wheels
The Mucky Full Face Fender is the the follow up to the original Face Fender fork mounted mudguard. The Full Face Fender is the same thickness as the Standard Face Fender but features an elongated, contoured £D profile that provides ultimate protection at a modest 45g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Full Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
Giant SpeedShield ATB Fender feature a unique softer PP material construction to prevent cracking in extreme temperatures with UV resistance for improved durability and a proprietary bracket design for a stable fit. FEATURES Unique softer PP material helps prevent cracks in extreme temperatures UV resistance for increased durability Proprietary bracket design helps keep fender stable on the bike Adjustable angle
Topeak Defender M1 Front Mudguard DeFender M1 is compatible with all standard front forks including reverse arch designs; the unique quick release attachment system integrates the DeFender M1 seamlessly with the front of your bike.A stiff engineering grade plastic support frame is comolded to a softer more flexible material at the trailing edge for greater durability. Features: Size: 60 x 10 x 12cm (L x W x H) Material Two Tone Injected Nylon Attachment QR Fork Attachment fits ø 19.6~ø26mm Weight: 190gBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
A stiff engineering grade plastic support frame is co-molded to a softer more flexible material at the trailing edge for greater durability.
Meet the brand new, fantastic, feature packed Face Fender!Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic.The HistoryThe Face Fender is the original ‘flexi-fender’ for Mountain Bikes, and the foundation on which we have built the Mucky Nutz empire!Introduced as the ‘Bender Fender’, way back in 2009 (yikes, we feel old!) our simple yet very effective mud guard was the first of its kind, taking the cycling community by storm.Today, 13 years after the original product was released, and with well over 1 million units sold world-wide, the Face Fender is more popular than ever. It has established itself as a household name, used and endorsed by Pro riders on the Downhill and Enduro circuits, and by weekend warriors alike!The DesignThe Face Fender design has been developed and refined several times over the years, to improve functionality and keep up with ever-changing suspension fork designs. We are very proud to bring you the latest and greatest Face Fender in this evolution.This edition brings a plethora of new features, offering you the highest functionality per gram, all within the most compact package possible. We are sticking with our tried and trusted (100% recycled) 1000 micron thickness material, which we have found to be the best balance between weight, flexibility, and durability.We are proud to be using 100% recycled plastic across the range, with re-useable VELCRO® Brand fasteners.Key Features· Stops muck, gravel, and ‘animal treats’ from being flung into your face, whilst thundering down the trail.· Simple design, which attaches to your suspension fork using the supplied VELCRO® Brand fasteners.· Super lightweight, at just 30g.· Compatible with 26", 27.5" and 29’’ wheel sizes.· Compatible with ‘standard’ and ‘boost’ suspension forks, with a forward-facing arch.· Will work with tyres up to 3’’ wide.· Improved seal shielding protects your precious (and expensive!) fork stanchions, seals and bridge from getting caked in mud and grit, reducing damage from wear and abrasion over time.· The new fold down front lip catches spray and splatter, keeping your face and eyes clear.· A secure fit, with no movement or rattling. You’ll hardly know it’s there.· Easy to clean, as it's flexible and opens flat. Spray it, wipe it, and you're done!· Comes with genuine, high-quality and super tough VELCRO® Brand fasteners. Velcro is soft on your paintwork, and makes fitting and removal a breeze for bike cleaning and maintenance.· Made in the UK, from 100% recycled waste plastic.Dimensions· Length: 241mm· Width: 272mm· Mass: 30gInstallation1. Break off the hanger tab, and remove the Velcro roll.2. Take the Velcro roll, and wrap it around a fork lower so it overlaps itself by an inch or so.3. Cut off that length, and repeat the process, so that you have two equal lengths.4. Do the same for the fork bridge. You will end up with two long lengths of Velcro for the lowers, and two short lengths for the bridge.5. Take the fender, and thread the long lengths of Velcro through the 'arm' holes (fluffy side towards the fork), and the short lengths through the two bridge holes.6. Position the fender to the underside of the fork bridge, and secure the top two Velcro straps around the bridge, pulling the fender up as high as possible.7. Now tighten the two fasteners around the fork lowers.8. Fold down the front lip, so that it clears the tyre by roughly 5 - 10mm.9. Square the fender up, and check tyre clearance.10. Go for a spin, and find some mud!SustainabilityIt's no secret that plastic is used in most of our products, and this is simply because it's the best material for the job. We manufacture everything using 100% recycled waste plastic.As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal consumption, minimal packaging, and minimal waste.Each product is designed to serve its purpose over many years and is by no means a ‘single-use plastic’. When a Mucky Nutz product does eventually reach the end of its functional life, it can be fully recycled once more.
If you look out the window before setting off for a day's riding and its pouring down then you will want to fit a rear mudguard to help keep your behind dry and free from mud. Luckily the Topeak Defender RX takes seconds to install and remove thanks to its quick release system so you don't have to waste valuable riding time fitting it. The angle is fully adjustable and it includes a coverage extender so you can guarantee you are staying fully protected.
The Face Fender XL is the new version of Mucky Nutz' Bender Fender but this version is pretty special as it is designed specifically for use on Fat Bikes. The biggest difference between this version and the standard MTB version is that is has 4 arms and split lines, this is to help the mudguard's extra length curve to give you added protection from mud, sand or snow. The 4 arms also provide the guard with added strength which it needs due to its slightly thicker build.Fits as close as possible to the knobbly bits for optimum 'muck' catching.Can be used on all wheel sizes.Protects your fork crown from getting caked.It's the lightest front Fat Bike mudguard available.Weight: 75g
The Syncros Trail Fender provides adequate protection from water/dirt spray while being quick and easy to fit or remove.High impact resistant polypropylene constructionOptimised tyre and fork crown clearanceEasily mounted with 2 supplied Torx screwsLightweight at only 30gThe Syncros Trail Fender is made from a high quality Impact PP that balances stiffness and durability. Designed to work specifically with Fox 34 & 36 Boost forks, the Trail Fender features a 2-bolt direct mount. This means a clean and reliable mount that is easily removable.
Much like the Syncros regular Trail fenders, the DH fender integrates perfectly with a Fox 49 fork to offer the perfect solution for when trail conditions are wet.Designed for FOX 40 and 49 forksHighest level of integration, durability and protection from mudOptimised fit through two screws on fork archCan be mounted as single rear or front + rear partsDimensions: 250mmWeight: 107g (approx.), hardware includesFully customisable, you can mount the full set, (extending either side of the fork) or the rear part only depending on riding conditions. The fender is screwed securely into the bridge, no need for zip ties for the ultimate clean look. Fully compatible with both FOX 40 / 27" and FOX49 / 29" wheel size thanks to 2 sets of mounting holes.
For 26' Wheel The DeFender™ FX (front fender) is the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFender to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. MATERIAL Injected high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 58.4 x 16 x 8.9 cm / 23” x 6.3” x 3.5” WEIGHT 180 g / 6.33 oz ATTACHMENT QR fork attachment fits ø18 - ø26 mm steerer tube