O'Neal Defender 2 HelmetDesigned for the rigours of enduro and trail mountain bike riding, the O'Neal Defender 2 Helmet offers trustworthy protection and impressive comfort for your ride. The Defender 2 Helmet brings together a tough outer shell and impact-absorbing foam liner. The outer shell protects against those more minor dings you get from overhanging bushes and branches that line mountain bike trails. Meanwhile, the foam liner layer soaks up more serious impacts - where tyres let go, skills come up short and you're heading head first towards the dirt.Cool and comfortableWhile offering reliable protection the Defender 2 is also superbly comfortable to wear. Large vents are used to allow as much airflow to your head as possible, keeping you cooler and more comfortable on the trails. A sweat-absorbing liner is deployed inside, preventing you from being drenched at the end of a fun-filled mountain bike session. And it's removable and washable too, letting you get that fresh-new-lid feel every time. Easy AdjustmentO'Neal's size adjustment system lets you get the perfect fit. A micro-adjustable dial to the back gives one-handed operation, even on the fly. You also benefit from the Fidlock® magnetic buckle, making it super quick and easy to fasten and release at the start and end of a ride. FeaturesO’Neal Fidlock® magnetic buckle for easy, single-handed fastening and releaseSize adjustment with micro-adjust 1-hand retention systemEasy strap adjustment for perfect individual fitSweat-absorbing and skin-friendly lining, detachable and washable (hand-wash)Oversized vents for maximum airflow and coolingDetachable visor with micro-adjust ratchet for easy angle re-positioning while ridingWeight: 380g (±25g)Exceeds EN1078 safety standard for bicycle HelmetsBuy O'Neal Protection from Chain Reaction, the World's Favourite Bike Store.
O'Neal Defender 2 HelmetDesigned for the rigours of enduro and trail mountain bike riding, the O'Neal Defender 2 Helmet offers trustworthy protection and impressive comfort for your ride. The Defender 2 Helmet brings together a tough outer shell and impact-absorbing foam liner. The outer shell protects against those more minor dings you get from overhanging bushes and branches that line mountain bike trails. Meanwhile, the foam liner layer soaks up more serious impacts - where tyres let go, skills come up short and you're heading head first towards the dirt.Cool and comfortableWhile offering reliable protection the Defender 2 is also superbly comfortable to wear. Large vents are used to allow as much airflow to your head as possible, keeping you cooler and more comfortable on the trails. A sweat-absorbing liner is deployed inside, preventing you from being drenched at the end of a fun-filled mountain bike session. And it's removable and washable too, letting you get that fresh-new-lid feel every time. Easy AdjustmentO'Neal's size adjustment system lets you get the perfect fit. A micro-adjustable dial to the back gives one-handed operation, even on the fly. You also benefit from the Fidlock® magnetic buckle, making it super quick and easy to fasten and release at the start and end of a ride. FeaturesO’Neal Fidlock® magnetic buckle for easy, single-handed fastening and releaseSize adjustment with micro-adjust 1-hand retention systemEasy strap adjustment for perfect individual fitSweat-absorbing and skin-friendly lining, detachable and washable (hand-wash)Oversized vents for maximum airflow and coolingDetachable visor with micro-adjust ratchet for easy angle re-positioning while ridingWeight: 380g (±25g)Exceeds EN1078 safety standard for bicycle HelmetsBuy O'Neal Protection from Chain Reaction, the World's Favourite Bike Store.
The Defender 2 Helmet brings together a tough outer shell and impact-absorbing foam liner. The outer shell protects against those more minor dings you get from overhanging bushes and branches that line mountain bike trails. Meanwhile, the foam liner layer soaks up more serious impacts - where tyres let go, skills come up short and you're heading head first towards the dirt. Cool and comfortable While offering reliable protection the Defender 2 is also superbly comfortable to wear. Large vents are used to allow as much airflow to your head as possible, keeping you cooler and more comfortable on the trails. A sweat-absorbing liner is deployed inside, preventing you from being drenched at the end of a fun-filled mountain bike session. And it's removable and washable too, letting you get that fresh-new-lid feel every time. Easy Adjustment O'Neal's size adjustment system lets you get the perfect fit. A micro-adjustable dial to the back gives one-handed operation, even on the fly. You also benefit from the Fidlock® magnetic buckle, making it super quick and easy to fasten and release at the start and end of a ride.
A neat and discreet, saddle mounted rear mud guard.The butt fender is a simple and lightweight solution, designed to help keep your back side clean and dry!FeaturesDeveloped for MTB, but equally suited to commuters.,Stops your butt and the top of your seat post from getting clogged up.,Discreet and very effective.,Weighs just 30g.,No fasteners required. Our simple, clever design is quick to fit and secure once in place.,Easy to clean as it's flexible and opens flat. Simply wipe and you're done (the Butt Fender, that is).,Made in the UK from recyclable plastic..CompatibilityDesigned to fit standard double-steel rail saddles that don't have any 'daft bits' in the way. See images for clarification.,Sustainability,It's no secret that plastic is used in most of our products and this is simply because it's the best material for the job.,As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal waste, minimal packaging and we recycle everything we can along the way. Each product is designed to serve its purpose over many years and is by no means a single-use plastic. When a Mucky Nutz product does eventually reach the end of its functional life, it can be fully recycled and we encourage customers to do so..DimensionsLength: 330mm,Width: 134mm,Weight: 30g.
Meet the brand new, fantastic, feature packed Face Fender!Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic.The HistoryThe Face Fender is the original ‘flexi-fender’ for Mountain Bikes, and the foundation on which we have built the Mucky Nutz empire!Introduced as the ‘Bender Fender’, way back in 2009 (yikes, we feel old!) our simple yet very effective mud guard was the first of its kind, taking the cycling community by storm.Today, 13 years after the original product was released, and with well over 1 million units sold world-wide, the Face Fender is more popular than ever. It has established itself as a household name, used and endorsed by Pro riders on the Downhill and Enduro circuits, and by weekend warriors alike!The DesignThe Face Fender design has been developed and refined several times over the years, to improve functionality and keep up with ever-changing suspension fork designs. We are very proud to bring you the latest and greatest Face Fender in this evolution.This edition brings a plethora of new features, offering you the highest functionality per gram, all within the most compact package possible. We are sticking with our tried and trusted (100% recycled) 1000 micron thickness material, which we have found to be the best balance between weight, flexibility, and durability.We are proud to be using 100% recycled plastic across the range, with re-useable VELCRO® Brand fasteners.Key Features· Stops muck, gravel, and ‘animal treats’ from being flung into your face, whilst thundering down the trail.· Simple design, which attaches to your suspension fork using the supplied VELCRO® Brand fasteners.· Super lightweight, at just 30g.· Compatible with 26", 27.5" and 29’’ wheel sizes.· Compatible with ‘standard’ and ‘boost’ suspension forks, with a forward-facing arch.· Will work with tyres up to 3’’ wide.· Improved seal shielding protects your precious (and expensive!) fork stanchions, seals and bridge from getting caked in mud and grit, reducing damage from wear and abrasion over time.· The new fold down front lip catches spray and splatter, keeping your face and eyes clear.· A secure fit, with no movement or rattling. You’ll hardly know it’s there.· Easy to clean, as it's flexible and opens flat. Spray it, wipe it, and you're done!· Comes with genuine, high-quality and super tough VELCRO® Brand fasteners. Velcro is soft on your paintwork, and makes fitting and removal a breeze for bike cleaning and maintenance.· Made in the UK, from 100% recycled waste plastic.Dimensions· Length: 241mm· Width: 272mm· Mass: 30gInstallation1. Break off the hanger tab, and remove the Velcro roll.2. Take the Velcro roll, and wrap it around a fork lower so it overlaps itself by an inch or so.3. Cut off that length, and repeat the process, so that you have two equal lengths.4. Do the same for the fork bridge. You will end up with two long lengths of Velcro for the lowers, and two short lengths for the bridge.5. Take the fender, and thread the long lengths of Velcro through the 'arm' holes (fluffy side towards the fork), and the short lengths through the two bridge holes.6. Position the fender to the underside of the fork bridge, and secure the top two Velcro straps around the bridge, pulling the fender up as high as possible.7. Now tighten the two fasteners around the fork lowers.8. Fold down the front lip, so that it clears the tyre by roughly 5 - 10mm.9. Square the fender up, and check tyre clearance.10. Go for a spin, and find some mud!SustainabilityIt's no secret that plastic is used in most of our products, and this is simply because it's the best material for the job. We manufacture everything using 100% recycled waste plastic.As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal consumption, minimal packaging, and minimal waste.Each product is designed to serve its purpose over many years and is by no means a ‘single-use plastic’. When a Mucky Nutz product does eventually reach the end of its functional life, it can be fully recycled once more.
The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Gut Fender is finally here and no Tweeks points will be awarded for guessing which area of the body this mudguard stops from getting muddy. The Gut Fender is lightweight and is made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...!
The Mucky Nutz Gut Fender is finally here and no Tweeks points will be awarded for guessing which area of the body this mudguard stops from getting muddy. The Gut Fender is lightweight and is made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...!
The Mucky Nutz Face Fender Reverse is the the reverse fork brace compatible version of the original Face Fender! Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Mini Face Fender is the a miniaturised version of the original Face Fender fork mounted mudguard! Perfect for kids bikes, BMX's or even some Cyclocross or Gravel bikes, the Mini Face Fender is made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Full Face Fender is the the follow up to the original Face Fender fork mounted mudguard. The Full Face Fender is the same thickness as the Standard Face Fender but features an elongated, contoured £D profile that provides ultimate protection at a modest 45g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Full Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.