The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
Replacement chromoly bolts for the Federal Impact Sprocket guard for the Federal Impact Sprocket ###section### Product Specs TYPE: N/A MATERIAL: N/A WEIGHT: TBC
Replacement Plastic guard for the Federal Impact Sprocket. Made from Tough plastic ###section### Product Specs TYPE: Bolt On MATERIAL: Nylon WEIGHT: 100g
This brand new sprocket from Fedetal takes its inspiration from the famous Mercedes AMG Aero car wheel pattern. This standard version has a 5 pronged design with a 3D machined surface which is 6.35mm in the middle and curves downwards to 4.4mm before returning to 6.35mm at the edge giving it a unique look. Spec: - Available in 25t or 28t in both silver or black -Compatible with 19mm, 22mm and 24mm cranks ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 80g
Solid sprocket from Federal. Machined from 6061-T6 aluminium this sprocket features a tough solid design with CNC machined BBS pattern finished with a laser etched Federal logo ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
This brand new sprocket from Fedetal takes its inspiration from the famous Mercedes AMG Aero car wheel pattern. This Guard version has a 5 pronged design with a 3D machined surface, The guard version is flat CNC machined to reduce weight. giving it a unique look. Available in 25t or 28t in both silver or black -Compatible with 19mm, 22mm and 24mm cranks ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
The Stance Spoke uses a butted cross section to increase strength at the most critical area and increase protection from grinding, ###section### Product Specs TYPE: Butted MATERIAL: Stainless Steel PACK SIZE: 5 NIPPLES: Brass Nipples WEIGHT: TBC
The Stance Spoke uses a butted cross section to increase strength at the most critical area and increase protection from grinding, ###section### Product Specs TYPE: Butted MATERIAL: Stainless Steel PACK SIZE: 40 NIPPLES: Brass Nipples WEIGHT: TBC
Pivotal stump post from Federal in the colours to match their other parts. Made from extruded 6061 aluminium, 200mm and with a printed Federal logo. Compatible with all pivotal seats only. ###section### Product Specs TYPE: Pivotal LENGTH: 200mm DIAMETER: 25.4mm WEIGHT: 136g / 4.8oz
The Federal Plastic/Alloy Peg features an outer diameter similar to regular steel pegs with a slightly shortened plastic sleeve, so if your peg hits the ground hard it less likely to damage the sleeve. Sold as a single peg in 14mm with 10mm adapter included. This peg is designed for light street or park use. Please note: The Federal Plastic/Alloy Peg is sold individually. ###section### Product Specs LENGTH: 4.2" (106.6mm) DIAMETER: 36mm MATERIAL: Metal peg/Plastic sleeve AXLE SIZE: 14mm with 3/8" adaptor PACK SIZE: 1 (Single) WEIGHT: 95g (3.4oz)
Replacement plastic sleeve for Federal's Plastic Peg. Please note: The Federal Replacement Plastic Sleeve is sold individually! ###section### Product Specs LENGTH: 4.5" (114mm) DIAMETER: 36mm MATERIAL: Plastic AXLE SIZE: 14mm PACK SIZE: 1 (Single) WEIGHT: 30g (1.0oz)
Replacement top cap for Federals V2 forks with H24 tread. Made from aluminium with a H24 thread which fits all new Federal forks and some other brands