Fox Suspension 34 Float SC Factory Remote ForkPart of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160 direct Post Mount, Up to 180 compatible Remote Compatible: No Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-21-059 Black 29" 100mm 44mm 910-21-058 Black 29" 100mm 51mm 910-21-061 Orange 29" 100mm 44mm 910-21-044 Black 29" 120mm 51mm 910-21-043 Black 29" 120mm 44mm 910-21-042 Orange 29" 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkPart of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160 direct Post Mount, Up to 180 compatible Remote Compatible: No Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-21-059 Black 29" 100mm 44mm 910-21-058 Black 29" 100mm 51mm 910-21-061 Orange 29" 100mm 44mm 910-21-044 Black 29" 120mm 51mm 910-21-043 Black 29" 120mm 44mm 910-21-042 Orange 29" 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Specifically designed for XC racing, this high-quality suspension fork is part of Fox Suspension's renowned Factory Series with a build that's feature-packed and engineered to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-059 Black 29" 100mm 44mm 910-21-058 Black 29" 100mm 51mm 910-21-061 Orange 29" 100mm 44mm 910-21-044 Black 29" 120mm 51mm 910-21-043 Black 29" 120mm 44mm 910-21-042 Orange 29" 120mm 44mm
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. Features NEW chassis. NEW air/oil channels. NEW lower leg design, highly optimized for maximum stiffness to weight. NEW arch shape offers improved head tube clearance with shorter rakes. Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuits. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Increased crown diameter to match modern frame shape profiles. Updated EVOL air spring. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. Specification Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 140 - 180mm. Offset Options: 37mm. 44mm. 51mm. Wheel Size: 27.5 . Axle: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Black. Upper leg finish: Genuine Kashima Coat.
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. Features NEW chassis. NEW air/oil channels. NEW lower leg design, highly optimized for maximum stiffness to weight. NEW arch shape offers improved head tube clearance with shorter rakes. Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuits. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Increased crown diameter to match modern frame shape profiles. Updated EVOL air spring. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. Specification Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 140 - 180mm. Offset Options: 37mm. 44mm. 51mm. Wheel Size: 27.5 . Axle: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Black. Upper leg finish: Genuine Kashima Coat.
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. NEW Crown - Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the new crown design improves durability while our engineering maintains stiffness and drops weight. Axle - Kabolt, a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design. Lower Leg Bypass Channels - Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders - Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch - Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity-style riding. GRIP2 - Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL - Optimizes small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. Specifications: Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 140 - 160mm. Offset Options: 44mm. 51mm. Wheel Size: 27.5 & 29 . Axle: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Black. Upper leg finish: Genuine Kashima Coat.
Fox Suspension 36 Float Factory E-Optimized Grip 2 ForkPart of Fox Suspension's prestigious Factory Series, this electric mountain bike (E-MTB) suspension fork comes trail-ready with technologies that are designed to exceed the demands of Factory-level riders. With an eye-catching genuine Kashima coating on its upper tubes, it provides slippery smooth operation while remaining ultra-durable as you tackle challenging terrain conditions. Benefitting from a lightweight Float EVOL air spring and a highly adjustable GRIP2 damper, the 36 offers an excellent combination of performance and tunability, everywhere from backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this E-MTB specific model is engineered for powerful front-end suspension performance. E-MTB Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by the Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Genuine Kashima Coat Use: Electric Mountain Bike (E-MTB) Axle: 15QRx110mm Boost Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) on High Speed Compression (HSC) and High Speed Rebound (HSR) circuits Steerer Diameter: 1.5" tapered Rotor Compatibility: 180mm direct Post Mount, Up to 230mm compatible Increased crown diameter to match modern frame shape profilesTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-20-209 Black 27.5" QR110 140mm 44mm 910-20-208 Black 27.5" QR110 160mm 44mm 910-20-204 Black 29" QR110 160mm 51mm 910-20-203 Black 29" QR110 160mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
No stranger to winning awards, accolades and Enduro World Series (EWS) races, this electric mountain bike (E-MTB) suspension fork is engineered for powerful front-end suspension performance. Part of Fox Suspension's prestigious Factory Series, it comes trail-ready with features and technologies that are designed to exceed the demands of Factory-level riders. With an eye-catching genuine Kashima coating on its upper tubes, it provides slippery smooth operation while remaining ultra-durable as you tackle challenging terrain conditions. Benefitting from a lightweight Float EVOL air spring and a highly adjustable GRIP2 damper, the 36 offers an excellent combination of performance and tunability, everywhere from backcountry routes to the EWS circuit. E-MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by the Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-20-209 Black 27.5" QR110 140mm 44mm 910-20-208 Black 27.5" QR110 160mm 44mm 910-20-204 Black 29" QR110 160mm 51mm 910-20-203 Black 29" QR110 160mm 44mm
This model of the legendary Fox 36 receives an update in the form of a revised crown design that's engineered with more steerer tube overlap. This improves its durability and maintains stiffness while dropping 20 grams. Updated Crown Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the updated crown design improves durability while our engineering maintains stiffness and drops weight. Kabolt X Axle Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, it features a single-sided pinch bolt design. Lower Leg Bypass Channels Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Grip2 Damper Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Fit4 ForkThis race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.