Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Fox Float DPX2 Factory MTB shock features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade for smoother and more reliable performance. Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression. Recirculating oil damper design for more control. EVOL Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer Part Numbers: 190mm, 45mm Stroke: 973-01-314 210mm, 50mm Stroke: 973-01-315 210mm, 52.5mm Stroke: 973-01-316 210mm, 55mm Stroke: 973-01-317 230mm, 65mm Stroke: 973-01-312 230mm, 60mm Stroke: 973-01-313 185mm, 44mm Stroke: 973-01-318 190mm, 50mm Stroke: 973-01-304 200mm, 50mm Stroke: 973-01-305 200mm, 57mm Stroke: 973-01-306 215mm, 65mm Stroke: 973-01-307
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
Fox Suspension Float X2 Factory 2 Position Adjust ShockFeaturing an award-winning and gravity-defying design, this mountain bike (MTB) rear shock holds nothing back, especially not you as you dominate on your favourite local trails. Part of Fox Suspension's renowned Factory Series, this model is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC)Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low speed compression as well as high and low speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.