The Park Tool HTR1 Head Tube Reaming and Facing Set allows for proper frame preparation. The HTR1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR1 is the quick-release, quick adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation. All cutting surfaces are top quality and extra sharp.
LifeLine offer a comprehesive range of bicycle tools with built-in quality and great value prices. Whatever mechanical job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.
Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards, or the tool can simply be used to ream a section of the frame which needs a little more clearance Note: No reamers, facers or pilots are included with this set.
Zone3’s Front Facing Swim Drill Snorkel has a stabilised construction with a secure fit that will stay in place even at high speed. The snorkel is excellent when you’re trying to focus your training into one specific area of your technique and you want to worry less about your breathing technique.
After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell.
Perfect for facing any thru-axle dropout setup and width, IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 accurately faces front and rear disc mounts to maintain and improve your braking quality. With telescopic axle adaptors for easy and adaptable use, and including a pair of IS Mount, post and Flat Mount cutters within its robust and convenient carry-case, this is a great bit of kit for any workshop or garage.
Park Tool Head Tube Reaming/Facing Set (HTR-HS)This tool is ideal for customising the actual setup that you require for your bike maintenance. This tool can be modified to face headsets and bottom brackets, press in bearings and headset cups or simply to ream a section of the frame which needs a little more clearance.Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards.Note that no reamers, facers or pilots are included with this set.Features:Park Tool part #: HTR-HSUniversally customisable tool for many usesCreate your own tool rather than having many different variants of the same designBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Facing Set BFS-1Park ToolBottom Bracket Facing Set BFS-1The Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed nut.After applying a liberal amount of cutting oil, the BFS-1 easily cuts the shell material, giving you a clean, faced surface. Now you're ready to install the bottom bracket.Buy Park Tool BB Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tapping+Facing Set BTS-1 The BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. Features:The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693), for the adjustable and fixed cups are available as accessories.Buy Park Tool Bottom Bracket Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Facing & Tapping SetLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Features:For English taps: 1.370” x 24 TPI right hand thread, 1.370” x 24 TPI left hand thread A precision tool system and made of high grade steelIt is a professional tool for tapping the threads in the bottom bracket shell of a frameGuides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shellBuy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
Proper frame preparation is very importantThe HTR-1B combines reaming and / or facing of the head tube to create a perfect fit for most sizes of headset cupsThe HTR-1B comes complete with a 33.8 mm reamer and four different size pilots (29.8 mm 30.0 mm 33.8 mm and 36.8 mm)The reamer is used to clean out or increase the diameter of the head tubeMost often facing of the head tube for good cup fit is the objective and no reaming is required in which case the pilots can be used in place of the reamersThe unique quick-release quick-adjust feature allows you to slide the bottom portion on and off easily without the long threading processThis threading function of the tool can still be fine tuned whilst in useThe tapered centring cone unit rides on a bearing for extra smooth operationAll cutting surfaces are top quality and extra sharp