Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Stix to a bag jacket or jersey for on-the-go visibility. Stainless steel spring clip for secure mounting.
Waterproof garments will, over time, lose some of the effectiveness of their water-repellent surface finishes. However, the Wash-in Rain Shield Re-Proofer (300ml) is an advanced Durable Water Repellent treatment that creates a new, tough barrier of weatherproof protection. Water will simply bead on the surface and roll off. And Rain Shield won't compromise the fabric's breathability either. Not only that, but it will also protect against mud and stains. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. Protection is fully restored within 24 hours of treatment. Shake to Activate Use 100ml per large item (20 x 5ml caps) on a 30°C/86°F washing cycle for best results to help restore waterproofing performance on technical garments. How to: 1. Muc-Off recommends cleaning your technical apparel with their Technical Wash before treating with Wash-In Rain Sheild Re-Proofer for the best results. 2. Shake the bottle well to activate the formula. 3. For best results we recommend reproofing garments separately. 4. Use 20 x 5ml caps per large item, or two smaller items. Use 5 x capfuls if hand washing. 5. Pour the product directly into the detergent drawer of your washing machine 6. Wash on a full cycle at 30°C/86°F or according to the care label instructions. 7. Air-dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. Or tumble dry if the care label inside your garment permits. Top Tip For an even more durable treatment, you can apply our Rain Shield Re-Proofer spray as a second treatment after using the wash-in formula. This will build a secondary water-repellent coating on garments used in very harsh/wet conditions. N.B The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing frequency. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellence, due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with Re-proofer.
Your outdoor activities, be it mountain biking, road biking, running or hiking, are tough on your technical kit, what with all the muck and grime. But Technical Wash (300ml) is perfect for refreshing those garments and extending the life of your outdoor kit. It's ideal for use on any waterproof/water-repellent fabric, including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing. Shake it up and use 25ml (5 x 5ml/0.16oz capfuls) per wash load for best results to keep your garments fresh, made with a biological PPC-free formula that's safe for the planet and your garments. How To: 1. Place garments to be washed into your washing machine. 2. Shake the bottle well to activate the formula. 3. Use 25ml (5 x 5ml/0.16oz capfuls) per wash load.4. Dispense Technical Wash for Apparel directly into the detergent drawer of your washing machine, in place of normal washing detergent. 4. Wash on a full cycle at 30°C/86°F or according to care label instructions. 5. Allow garments to air-dry. Top Tip If washing water-repellent/waterproof garments It's recommended to re-treating with Muc-Off Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water-repellent finish. Follow the directions for use on the bottle for application details.
Simply spray the Rain Shield Re-Proofer on a garment and you'll enjoy restored factory-level waterproof performance within 24 hours of application. The waterproofing technology reduces surface tension, letting water bead and roll off the surface. You'll also find it protects against mud and ground-in stains. And not only that, but it won't compromise the breathability of your garment either. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. How To: 1. Shake the bottle well before use to activate the formula. 2. Spray all over a clean, damp garment from 10-15cm away until the garment is fully treated. (Recommended using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). Muc-Off recommends spraying in a well-ventilated, dry area. 3. Remove any excess treatment with a clean cloth. 4. Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. 5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with a re-proofer. Best applied to a clean, damp garment for optimum results.
Whether it's a mountain bike shred session, a speedy road ride or a tough trail run, you and your kit will soon start to get sweaty. And with sweat comes odour. But fear not, the Anti-Odour Spray (250ml) removes odour-producing bacteria, eliminating the smells that can form over time if left untreated. The easy-to-apply spray is ideal for removing odour caused by bacteria from body armour, shoe lining, gloves, pads or any soft material, synthetic fibre or textile that comes into contact with your skin. This hygienic finish is also long-lasting, leaving a fresh smell for up to 10 washes, and the spray bottle is easy to use at home or when you're on your travels. Product Details: Storage Store in a cool, dry place. Do not freeze or allow to frost. Use in a well-ventilated area Safety Information Keep out of reach of children DO NOT USE ON ANY HEADWEAR INCLUDING HELMET LINERS. DANGER: Causes serious eye damage IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. FIRST AID: after inhalation: Supply fresh air; consult a doctor in case of complaints. CONTAINS: Docusate sodium, Ethanol, Silver Chloride
Safe on sportswear fabrics Halo Proactive Sports Wash is safe on most common fabrics (cotton, polyester,denim) and widely used sportswear clothing such as. Lycra, Gore-Tex, Nylon, Elastane, Spandex, Viscose and many more. How it works Bacteria caused by sweating trapped in the weave of the clothing produce bad odours. Most detergents mask odours by leaving soap residue on your clothing. Halo Proactive Sports wash kills the bacteria which are trapped in the weave of the fabric thus allowing the clothing to breath. It continues to work by leaving behind active agents in the weave of the clothing. British standards approved to EN1275 & EN1276. Independently tested by UK Laundry technology centres. Washing Your Shoes Bad odours caused by bacteria and fungi growths can be significantly reduced by cleaning training shoes with Halo Proactive Sports Wash detergent. The product is proven to kill Athletes Foot Fungus. Ingredients: Contains 15%-30% Phosphate, Less than 5% Anionic and Nonionic Surfactants, Also contains Optical Brightener, Disinfectant and Perfume.
Super bright 30 lumen Front COB light. Micro USB recharging.Key Features:Lumen Output : 30,Burn time : high 8 hours | med 9 hours | flash 12 hours | strobe 12 hours,USB Rechargeable,Waterproof : IPX5,Lithium ion battery.
A modern take on the classic bicycle pump. Elegant & ergonomic yet high volume and packed with features such as a Presta & Schrader 'smart' head and extendable braided hose. A classy addition to a town bike bike or functional showpiece in a workshop. Classic looks, exceptional performance.Key Features:Length: 400mm,Volume: 162cc,Weight: 300g,Max. Pressure: 40psi.
Easy to install lightweight and secure this computer mount will simply integrate with both your Garmin or Wahoo computer and also the Lumaray V2 light system. Fits Wahoo and Garmin cycle computers with standard ¼-turn mount Computer stays flush with top of your handlebar Garmin and Wahoo fitment pucks included Lumaray light fitment & ¼ turn mount on underside Light mounts at -5º angle for increased visibility Fits 31.8mm handlebars Length: 130mm Weight: 38g Pucks: Threaded replaceable Body: Fibre reinforced nylon
Fabric’s tri saddle is designed to suit the specific requirements of triathlon and time trial. Shorter in length than a traditional saddle and featuring a centralised relief channel the Tri saddle is designed for performance but not at the expense of comfort.Full length pressure relief channelExtended pressure on the pudendal artery can lead to discomfort and numbness. A central pressure relief channel running the length of the Tri saddle ensures comfort and performance.Integral bike hanger & clip on bottle mount includedWith a bike hanger and rear bottle mount included as standard the Tri saddle is performance oriented feature packed and great value.*Please note; black/black option does not have black rails as pictured.width_134mmlength_267mmBase_NylonRail_Hollow TitaniumUpper_Lightweight PU foamCover_Waterproof microfibre
A stylish classic with modern skills - Laden with style and cutting-edge features the Megabar is the ultimate alternative to a track pump when travelling. The slim yet powerful pump is a modern take on the classic frame pump. Traditional high-quality features such as the turned wooden handle and braided stainless steel hose are mixed with modern innovations such as the high-volume aluminium barrel and ‘smart’ head for dual-valve compatibility.Length: 410mmCapacity: 162ccTurned wooden handleLarge volume chamberSandblasted aluminum bodyMax pressure 60psi / 6.2barHigh quality steel braided hoseFabric designed ‘smart’ headFeature-laden intuitive update of a classic designRefined and efficient: Timeless rugged and forward-thinking the Megabar impresses in both durability and function. Innovative features include an extendable braided stainless steel hose with adaptable 'smart' head. Do away with fiddly alterations for different valves with a threaded adaptable chuck that offers dual valve compatibility without the need to detach the hose from the pump. Measuring just 400mm but with a 162cc capacity from its 29mm diameter barrel the Megaber delivers on power and volume.Compatible with Presta or Schrader valve heads
Tri Flat ProFabric’s Tri saddle is designed to suit the specific requirements of triathlon and time trial. Shorter in length than a traditional saddle and featuring a centralised relief channel the Tri saddle is designed for performance but not at the expense of comfortCarbon RailNylon BaseWidth: 134mmLength: 240mmWeight: 176gFull length pressure relief channelExtended pressure on the pudendal artery can lead to discomfort and numbness. A central pressure relief channel running the length of the Tri saddle ensures comfort and performance.Integral bike hanger & clip on bottle mount includedWith a bike hanger and rear bottle mount included as standard the Tri saddle is performance oriented feature packed and great value.