The patented "Smart Cradle System" is adjustable to securely fit chains of different sizes.Features a chain hook inside the handle.Specification:Compatible with 5-12 speed; 3/32" and 1/8" single speed chains.,Material: Alloy steel (handle) / CNC machined 6061 aluminium (body) / S2 tool steel (pin).,Size: 145 x 70 x 21mm.,Weight: 215g..
Genuine Wheels Manufacturing spare or a great tool on it's ownTo remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1-ö wrenches (for large sized extractors), hammer and punchThe correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extractPlace extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractorTighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearingOnce the extractor is secured, align a punch with back side of the extractorGently tap on the punch until bearing is removed along with the extractorThe bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bb-Æs) or PRESS-2 (front hub)
RapidRacerProducts Bearing Press & Extraction ToolPerfect for experienced home mechanics, the Bearing Press & Extraction Tool (BPET) will accurately install and remove frame linkage bearings. In addition, it can also be used for many types of pivot and hub bearings. (Adaptors and kits are being developed for hubs and pivot bearings)Instructions for UseFirstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert/extract. You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing.NOTE: Extracting Bearings (RED adaptors) and Inserting Bearings (BLUE adaptors) - SOLD SEPARATELYFeatures: The BPET is only suitable for frames with flat surfaces to press against Ideal for the competent home mechanic who has reasonable knowledge and experience of working on bikes Designed to extract and insert linkage bearings Tool can also be used to press and extract bearings on hubs and freehub bodiesPlease Note: The handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment/incorrect installation.)Buy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
This superb quality tool makes chain maintenance easy. Driving rivets out of your bike chain with the utmost efficiency and comfort, this Dragonfly model's unique design is reliable and reassuring to hold and use. Giving great grip from its T-Handle design, it can be used on 9, 10 and 11-speed chains thanks to its reversible construction. Specification: Functions: Compatible with 9-12 speed chains, and Campagnolo 11 speed chains.,Material: Handle : CNC machined 6061 aluminium / Body : CNC machined 6061 aluminium / Pin : Special steel S2.,Size: 175 x 105 x 28mm.,Weight: 285g..
Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door. Crank boots included. Key Features: Lightest production crankset on market with ultra-lightweight carbon fiber crankarms, 30mm spindle,and APS adjuster.,73mm spindle,Compression molded carbon fiber arms, aluminum spindle,Spindle: Width 73mm, Diameter 30mm, Interface P3 Connect™,Q FACTOR: Mountain: 172mm,Chainline : 73mm Spindle: Boost (52mm) chainline w/UL Chainring,73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring,. Compatibility: Chainrings: UL Chainring, and SL Chainring, Bottom Brackets: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets.
World Cup proven for years, and in contrast to our Gen3 carbon cranks, the Q Factor, overall profile, and volume of our Gen4 cranks has been greatly reduced. Spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance.The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Smaller Q Factor, overall profile and volume. Spindle on non-drive side for easier chainguide setup and drivetrain maintenance. Adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. 8mm self-extractor. Key Features: Non-Boost, Boost, SuperBoost,Included APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual,World-Cup DH-rated layup and construction, compacted carbon fiber, with additional 3k added to front and rear faces of crank for impact resistance,Width 73mm, Diameter 30mm, Interface P3 Connect™.
Key Features: The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components,Utilizing expanding collets, an extendable shaft and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact,The SHX-1 is compatible with cartridge bearings with inner diameters from 6mm to 32mm, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets,Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed.
Key Features: The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors,The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact,Also included are eight installation drifts for pressing bearings into pre-installed cups,Organized in a convenient storage case,Full list of compatible bearing inner/outer diameters found on instructions/parts diagram,NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for useMade in the USA and covered by Park Tool's legendary limited lifetime warranty.