The X-GUARD is a universal mudguard for any wheel size. It is attached using two straps on the lower bar, so fat bikes and bicycles with oversized tyres in particular can rest assured of absolute all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-GUARD suitable for any frame shape and all commonly marketed battery models. Key Features:Material: Plastic,Colour: black,Weight: 145g,Wheel Size: 26", 27,5", 28", 29 ",Profile Width: 141 mm,Length Front Fender: 480 mm,.
Crank Arm Bolt Kit M18/M30 Alloy Self-Extracting BB30 Left (Black Red Force)
Key Features: The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors,The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact,Also included are eight installation drifts for pressing bearings into pre-installed cups,Organized in a convenient storage case,Full list of compatible bearing inner/outer diameters found on instructions/parts diagram,NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for useMade in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features: The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components,Utilizing expanding collets, an extendable shaft and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact,The SHX-1 is compatible with cartridge bearings with inner diameters from 6mm to 32mm, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets,Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed.
Key Features:Durable chain tool for use with all bicycle chains,1/8”, 3/16” and 3/32” compatible,Storage for chain hook (included) and quick link (not included),Replaceable hardened steel pin.
Key Features:Cushion handle for comfort.,Workshop quality,Suitable for both splined & square taper.
Genuine Wheels Manufacturing spare or a great tool on it's ownTo remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1-ö wrenches (for large sized extractors), hammer and punchThe correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extractPlace extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractorTighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearingOnce the extractor is secured, align a punch with back side of the extractorGently tap on the punch until bearing is removed along with the extractorThe bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bb-Æs) or PRESS-2 (front hub)
CMPT:Chain rivet for 8-, 9-, 10-speed chains.Pro:Chain rivet for all chains. Includes guide pin and spare pin.
The patented "Smart Cradle System" is adjustable to securely fit chains of different sizes.Features a chain hook inside the handle.Specification:Compatible with 5-12 speed; 3/32" and 1/8" single speed chains.,Material: Alloy steel (handle) / CNC machined 6061 aluminium (body) / S2 tool steel (pin).,Size: 145 x 70 x 21mm.,Weight: 215g..
Carogna double sided adhesive tape for Tubulars bridges the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance.• Extremely easy to use compared to mastic.• Very reliable adhesion, in any condition.• Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning.• Works for Road and Cyclocross.• Also available in very convenient Shop Rolls.Why We Created It:We started developing Carogna (pronounced “car-own-ya”) double sided adhesive Tubular Tape with a clear and ambitious goal: to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, we gave specific additional consideration to Cyclocross and MTB Tubulars, where specific features are needed from the gluing standpoint.Universal Performance:Carogna has been tested and is designed to perform flawlessly on any rim material (Aluminium, Carbon), with any Tubular (seamless, handmade, vulcanized sew-ups…), on and off-road.Specific Adhesive Properties on Rim and Tubular:Two Application-Specific SidesSemi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the Tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both Aluminium and Carbon without any specific surface preparation.Permanent on the Tubular SideThere’s a 1 mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the Tubular is first inflated, ensuring optimized contact with any Tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).Wide Temperature Range in UseOnce adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tapeOptimized Adhesive Surface:Adhesion is very strong and uniform across the whole circumference of the rim for all Tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of Tubulars with a raised centre seam. Carogna solves these problems.Temperature Range When MountingIdeal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength . Applying the tape below 10°C is not recommended. We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcohol or mineral spirits.