RapidRacerProducts Bearing Press & Extraction ToolPerfect for experienced home mechanics, the Bearing Press & Extraction Tool (BPET) will accurately install and remove frame linkage bearings. In addition, it can also be used for many types of pivot and hub bearings. (Adaptors and kits are being developed for hubs and pivot bearings)Instructions for UseFirstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert/extract. You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing.NOTE: Extracting Bearings (RED adaptors) and Inserting Bearings (BLUE adaptors) - SOLD SEPARATELYFeatures: The BPET is only suitable for frames with flat surfaces to press against Ideal for the competent home mechanic who has reasonable knowledge and experience of working on bikes Designed to extract and insert linkage bearings Tool can also be used to press and extract bearings on hubs and freehub bodiesPlease Note: The handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment/incorrect installation.)Buy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Extreme tread design gives fantastic traction in the worst conditions, ideal for off road use.
You've never stopped pushing your limits, why would we? Our first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles . Striking the balance between shred-ready and climb-crushing, we incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With our Vault Hub's Super Fast Engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your Rally to the next level. Get ready to be fast in every direction. Hub Features: Large oversized flange for improved bracing angle.,Larger bearings.,No bearing adjuster needed.,Wider bearing stance 6 double tooth pawls (3 engage at a time).,120 points of engagement (3 degrees).,Independently sprung pawls.,Balanced spoke counter bore.,Tool-free interchagable end caps (sold seperately).,. Rim Features: Full carbon fibre construction.,31mm Internal width tubeless ready rim.,4.5mm Offset - Improves spoke balance and wheel stiffness.,High gloss black water transfer logos.,. Specification: Colour - Black.,Built For - Trail/AM/Enduro.,Rear Hub - 12x148 Boost Rear, 12x157.,Front Hub - 15x110 Boost Front (Convertible to: 15x110 Torque Cap).,Rim - UD Carbon Composite, Offest Spokes, Matte/Gloss Finish.,Weight - Set 27.5" 1680g, 29" 1765g.,Rim Dimensions - Height: 34mm, Internal Width 31mm.,Spokes - 28 F/R, 3X Pattern..Image for illustration purposes only
Race Face is excited to grow our Next carbon wheelset lineup with the addition of the Next R36, providing better grip on the terrain you rip with a 36mm internal rim width, which optimizes the tread patterns on 2.4 - 2.8 tyre options. Like our Next R31, the Next R36 incorporates a durable carbon layup built for Enduro style abuse, with an offset spoke hole layout delivering improved tension balance to up the sturdiness. And with our no-fault Carbon Confidence Guarantee, you can go full send and know that Race Face has your back, from the hubs, to the spokes to the rims themselves. Next R36 feature a 36mm internal width, the super-fast engagement of the Race Face Vault Hub, tubeless ready design, and tool-free interchangeable end caps. 2 Year No Fault Guarantee. Hub Features: Large oversized flange for improved bracing angle and larger bearings.,Wide bearing stance.,6 double tooth pawls (3 engage at a time).,120 points of engagement (3 degrees).,Individually sprung pawls.,One length spoke used throughout wheelset (F&R).,Tool-free interchangeable end caps (sold separately).,Low drag labyrinth cassette body seal.,. Rim Features: Full carbon fibre construction.,36mm Internal width.,Tubeless ready rim (tape and valves installed).,4.5mm Offset improves spoke tension balance and wheel stiffness.,High gloss black logos and interchangable vinyl decals.,Race Face Carbon Confidence: Our Next SL Carbon Wheelset is covered by our Carbon Confidence Guarantee – 2 Years, No Fault, Guarantee to the original retail purchaser with proof of purchase.,. Specification: Colour: Carbon.,Built for: Trail / All Mountain / Enduro.,Rear Hub: 12x148 Boost.,Front Hub: 15x110 Boost (convertible to: 15x110 torque cap).,Rim: tubeless ready ud carbon composite, offset spokes, matte/gloss finish.,Weight (set): 1720g (27.5") / 1790g (29").,Rim Internal Width: 36mm .,Spokes: Sapim D-Light, 28 F/R, 3x pattern (5 spares included, single spoke length for the entire wheelset) ..Image for illustration purposes only
Trail riding can be tough on your gear. The ends of your alloy or carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Against the clock or against yourself, R is for rally.We get it. If we say Enduro one more time you're going to burn this sheet. But however you want to brand it, pedal-heavy outings with aggressive all-mountain shredding can be very demanding on cranks. That's why we've taken elements from our SixC desgins and incorporated them with the best of Next to make an aggressive all-mountain ready crank that can take you to the EWS podium. Light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R.Key Features:Manufactured from UD Carbon with matte clearcoat.,Hand made in Canada.,SixC G2 Pedal Insert for increased Rally Factor.,Burlier 7050 Spindle.,Cinch technology for game-changing compatibility.,.Specifications:Size: 170, 175mm.,BB Options: BB92 | 68/73 BSA | 100mm BSA | PF30,Spindle Diameter: 30mm.,Weight: 495g (32T Ring, No BB).,Ring configurations: Spiderless Direct Mount | 64/104mm.
Key Features: Standard 6806 retainer bearings,Bearings are external to the BB shell resulting in a stiffer wider stance,Bearings are factory filled with Phil wood grease,Cups are machined for a high tolerance frame fit,. Specification: Built for: XC / AM / FR / DH., Compatibility:PF30 BB Shells..
Key Features: Custom 19 ball flanged retainer bearings,Allow the use of a 30mm spindle with Shimano press fit shells without decreasing ball bearing size,Bearings races are fully coated for improved corrosion resistance,Bearings are factory filled with Phil wood grease,Includes an industry exclusive inner sleeve to protect against water ingress.
Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Key Features: Manufactured from UD Carbon with matte clearcoat.,Carbon optimized flex for improved small bump compliance.,. Specification: Built for: XC / Trail.,Dimensions: 760mm width, 8° rearward, 5° upward.,Rise: 10mm.,Weight: 180g.,Bar Diameter: 35mm..
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of our SixC bars. DH strength and Enduro weight for when you really need to lean into it. Key Features: Manufactured from UD Carbon with matte clearcoat.,Carbon optimized flex for improved small bump compliance.,35mm bar diameter for incredible strength/weight ratio.,. Specification: Colour: Black.,Built For: Aggressive Trail / AM / Enduro.,Sweep: 8° Backward, 5° Upward.,Bar Diameter: 35mm.,Rise: 35mm.,Weight: 215g (20mm rise)., Width: 780/800mm..
Key Features: Custom 19 ball flanged retainer bearings,Allow the use of a 30mm spindle with Shimano press fit shells without decreasing ball bearing size,Bearings races are fully coated for improved corrosion resistance,Bearings are factory filled with Phil wood grease,Includes an industry exclusive inner sleeve to protect against water ingress,. Specification: Built for: XC/AM/FR/DH,Colours: Black.
Key Features: Custom 19 ball flanged retainer bearings,Allow the use of a 30mm spindle with Shimano press fit shells without decreasing ball bearing size,Bearings races are fully coated for improved corrosion resistance,Bearings are factory filled with Phil wood grease,Includes an industry exclusive inner sleeve to protect against water ingress.