Miche Supertype Evo Max BB86 Bottom BracketThis stunning bottom bracket is specifically designed for use with 24mm cranks for smooth rolling operation. Its high-quality resin press fit cups are compatible with BB86 frame standards, so you can enjoy increased stiffness and efficiency. Finally, it weighs only 94g, so you won't have to worry about adding any unnecessary weight to your ride.Features: Bracket Material: AL 7075-T6 Aluminium Cup Material: Resin Bearings: SKF sealed Dimensions: 86.5x46mm Axle Diameter: 24mm Compatibility: BB86, press fit Weight: 94gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Supertype Evo Max Bottom BracketThis top-notch bottom bracket is specifically designed for use with 24mm cranks for smooth rolling operation. Its high-quality aluminium press fit cups are compatible with BSA frame standards, so you can enjoy increased stiffness and efficiency. Finally, it weighs only 134g, so you won't have to worry about adding any unnecessary weight to your ride.Features: Bracket Material: AL 7075-T6 Aluminium Cup Material: AL 7075-T6 Aluminium Bearings: SKF sealed Axle Diameter: 24mm Compatibility: 1,370x24tpi BSA, press fit Weight: 134gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Supertype Evo Max bottom bracket is a full aluminium, high end bottom bracket. The cups are made from AL 7075-T6, while the one-piece light alloy middle keeps weight to a minimum. Fully sealed SKF bearings give a long life and smooth movement.Specifications:Material: AL 7075-T6,Bearings: SKF sealed,Thread: 1,370 x 24 tpi BSA,Diameter: 24mm,Weight: 134g.
Miche Team Evo Max 2x10 Speed Road ChainsetThe Miche Team Evo Max 10sp Chainset is a one-piece forged lightweight alloy chainset with integrated axle. It offers high levels of torsional stiffness and features lightweight AL 7075 T6 reinforced chainrings that feature the Total Treatment hardening process.Features: Arm Material: AL 6061 T6 forged, steel axle Chainring Material: AL 6082 T6 Total Treatment anodised BCD: 110mm Bottom Bracket Compatibility: Evo Max 36x24TPI - 1,370x24TPI, Evo Max 68x42, Evo Max 68x46, Evo Max 86,5x41 e Evo Max 86,5x46 Use: Road Weight: 817g (34/50T, 170mm W/O BB)Buy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
It offers high levels of torional stiffness and features lightweight AL 7075 T6 reinforced chainrings that feature the Total Treatment hardening process.
If you are looking for the best value, most comfortable shorts on the market, go no further. Award-winning, with rave reviews from our customers, these shorts have raced across countries and continents, and people's minds have been blown. Bib Short Guarantee: we're so confident that you'll love these we offer a 30-day trial. If you're not happy simply return for a full refund. Features: Premium Lycra Award-winning dual layer perforated chamois Lightweight straps for maximum ventilation Soft silicone leg bands Flatlock stitching Panelled construction for superior fit Sun Protection Factor 50 Features: Fabric: Soft, strong and durable Lycra based fabric Main Body: 78% Nylon/ 22% Elastane Mesh: 82% Polyester/ 18% Elastane
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Are you ready? The worlds fastest mudguard is evolving…The New Mudhugger EVO, designed with the help of DH World Cup and EWS racers.We’ve had the benefit of designing the new Mudhugger EVO around the the latest FOX 36 and 38’s and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost.Please note: For fitting to RockShox Zeb or Ohlins forks the Mudhugger Adapter Kit (Product ID: 234767) is also required. More clearance,Stiffer,Optimum length, not too short, no longer than needed.,Subtle kicker to keep length as short as possible without compromising spray protection.,Strong enough for DH racing at the highest level.,100% recycled PP.,Made and designed in the UK..
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.