Mudhugger EVO Ziptie Clip-On Front MudguardThe EVO Ziptie Front Mudguard from Mudhugger is a stiff and durable mudguard that's held in place with zip ties. And, it's ideal for use with downhill (DH) and enduro bikes in all weather and trail conditions.Are you ready? The world's fastest mudguard is evolving, the Mudhugger EVO Ziptie, designed with the help of DH World Cup and EWS racers. With the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost (not reverse fork brace forks though). Optimum length, not too short, no longer than needed. Plus, it features a subtle kicker to keep the length as short as possible without compromising spray protection and is strong enough for DH racing at the highest level. Features: Length: 515mm - Rear extension 330mm, front extension 185mm Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full compression 100% recycled PP Designed, made and packed in the UK Weight: 120g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Bolt-On Front MudguardThe Mudhugger Shorty EVO is a shorter variant of the Mudhugger EVO mudguard/fender that's compatible with modern mountain bike (MTB) suspension forks.The Mudhugger EVO is designed around the latest Fox 36 and 38's and Rockshox Zeb (not compatible with 38mm offset Zeb) to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for Zeb, see options) but still compatible with older (2017) onwards Fox forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Also compatible with Ohlins RXF and Downhill (DH) forks (adapter bracket required, see options). Please Note: For all Downhill forks see the options for FOX and Ohlins DH version. Features: Length: 400mm total - Rear extension 265mm, front extension 105mm Weight: 105g, without fittings Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your Fox forks. For RockShox Zeb and Ohlins an Adapter Pack is required, sold separately Shorty version of the Long EVO More mud clearance No more crown fouling at full-compression Subtle kicker to keep length as short as possible without compromising spray protection 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Headset Spacer Kit (Pro 2-EVO-Pro 4-OS)Adapt your front hub to fit a variety of SRAM Boost Forks thanks to this Hope Headset Spacer Kit. This kit provides simple and easy wheel fitting and stiff and receptive steering that you can count on. Suitable for use with the SRAM/RockShox Torque Cap interface, this headset spacer kit will convert your Hope front hub to be compatible with a SRAM Torque Cap.Features:Use: Mountain Bike (MTB)Converts standard Hope Pro 2, Pro 2 Evo or Pro 4 100mm hub to a SRAM Torque Cap/15mm axle Boost (110mm)Compatible With: RockShox forks with Torque Cap compatibility onlySuitable for use with the latest models of RockShox Judy, Lyric, Pike, Reba, Revelation, SID, Yari, etcHope Part Number: HUB486Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope EVO-Pro 4 - O/S Spacer Kit ConversionThis O/S Spacer Kit makes your 15x110mm Pro 2/Pro 2 EVO/Pro 4 “Boost” hub compatible with 15x110mm "Boost" forks that use the SRAM/RockShox Torque Cap interface. These caps will ensure you'll enjoy quicker and simpler wheel fitting and the stiffest and most responsive steering out there.Features: Converts Hope Pro 2, Pro 2 Evo or Pro 4 “Boost” hub to a SRAM Torque Cap/15mm axle Compatible with RockShox forks with Torque Cap fitting only Hope Part Number: HUB485Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Front Conversion Kit (Pro 2-Evo-Pro 4)Adapt your favourite Pro 2, Pro 2 Evo or Pro 4 front hub to be suitable for road, gravel, or cyclocross bike's thru-axle forks with this Front Conversion Kit from Hope. This kit converts standard front hubs so they can be used with 12mm thru-axle forks, so you can continue to use your trusty Hope hub on your next set-up.Features:Converts standard (non-boost) Pro 2, Pro 2 Evo, or Pro 4 front hubs to suit 12mm thru-axle forksHope Part Number: HUB482Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2/3/EVO Pawls & SpringsIf your Hope rear hub has begun to slip and cause you drivetrain issues, it may be time for new internal parts for your freehub. This Pro 2/3/EVO Pawls & Springs kit will get your freehub engaging quickly again so you can quickly attack the climbs and get up to speed.Features:Compatibility: Hope Pro 2, Pro 2 Evo, Pro 3Included: 4x pawls and 4x springsManufacturer's Part Number: HUB516SBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 / 4 Evo Rear Hub Conversion KitIf you’ve just upgraded your bike and want to move your Hope wheels or Hope Pro 2 Evo / Pro 4 Evo hub equipped wheels on to it, you may need alternative end caps. Available in a range of sizes to suit today’s most commonly seen axle types, these simple to fit rear hub adaptors can be installed without tools so you can hit the trails in no time.Features: Specifically for Hope Pro 2 Evo and Pro 4 rear hubs Accurately machined conversions ensure perfect fit Easily change between axle sizes, usually without tools Available for different axle types including: 10mm bolt in12mm bolt thru Quick release (QR) X12 Thru (Requires a spacer if being used with a SRAM XD freehub.) Please Note: Not compatible with Hope Pro 2 rear hubs, only the Pro 2 Evo model.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 / 4 Evo Rear Hub Conversion KitIf you’ve just upgraded your bike and want to move your Hope wheels or Hope Pro 2 Evo / Pro 4 Evo hub equipped wheels on to it, you may need alternative end caps. Available in a range of sizes to suit today’s most commonly seen axle types, these simple to fit rear hub adaptors can be installed without tools so you can hit the trails in no time.Features: Specifically for Hope Pro 2 Evo and Pro 4 rear hubs Accurately machined conversions ensure perfect fit Easily change between axle sizes, usually without tools Available for different axle types including: 10mm bolt in12mm bolt thru Quick release (QR) X12 Thru (Requires a spacer if being used with a SRAM XD freehub.) Please Note: Not compatible with Hope Pro 2 rear hubs, only the Pro 2 Evo model.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 / 4 Evo Rear Hub Conversion KitIf you’ve just upgraded your bike and want to move your Hope wheels or Hope Pro 2 Evo / Pro 4 Evo hub equipped wheels on to it, you may need alternative end caps. Available in a range of sizes to suit today’s most commonly seen axle types, these simple to fit rear hub adaptors can be installed without tools so you can hit the trails in no time.Features: Specifically for Hope Pro 2 Evo and Pro 4 rear hubs Accurately machined conversions ensure perfect fit Easily change between axle sizes, usually without tools Available for different axle types including: 10mm bolt in12mm bolt thru Quick release (QR) X12 Thru (Requires a spacer if being used with a SRAM XD freehub.) Please Note: Not compatible with Hope Pro 2 rear hubs, only the Pro 2 Evo model.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 / 4 Evo Rear Hub Conversion KitIf you’ve just upgraded your bike and want to move your Hope wheels or Hope Pro 2 Evo / Pro 4 Evo hub equipped wheels on to it, you may need alternative end caps. Available in a range of sizes to suit today’s most commonly seen axle types, these simple to fit rear hub adaptors can be installed without tools so you can hit the trails in no time.Features: Specifically for Hope Pro 2 Evo and Pro 4 rear hubs Accurately machined conversions ensure perfect fit Easily change between axle sizes, usually without tools Available for different axle types including: 10mm bolt in12mm bolt thru Quick release (QR) X12 Thru (Requires a spacer if being used with a SRAM XD freehub.) Please Note: Not compatible with Hope Pro 2 rear hubs, only the Pro 2 Evo model.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 Evo/Pro 3 Mono Freehub BodyAggressive mountain biking can be tough on components, even the most durable ones, so Hope offers this replacement freehub body to get your Hope rear hub working like new again. Suitable for the popular Pro 2 Evo, Pro 3 and Mono models, it's easy to fit and with its four pawls engaging its twenty-four tooth steel ratchet, it gives you near-instant pedalling engagement. It also spins on fully sealed cartridge bearings for low rolling resistance, a long lifespan and protection from whatever the trail throws up.Hope Technology is one of the world leaders in engineering bicycle hubs. Since 1989, owners Ian Weatherill and Simon Sharp have been pushing the industry forward. Hope designs, tests and manufactures virtually all its products in-house at its factory in Barnoldswick, United Kingdom. Features: Material: Alloy Option: One piece 7075 Aluminium rotor body and pawl carrier; Steel Option: One Piece Steel rotor body and pawl carrier Compatibility: Suitable for Hope Pro 2 Evo Pro 3 and Mono rear hubs Cassette Compatibility: Shimano/SRAM 9, 10 and 11-Speed (not SRAM XD compatible) Sealed stainless steel cartridge bearings Four pawls engage into a twenty-four tooth steel ratchet Does not suit Hope Pro 2 models Manufacturer's Part Number: Alloy Option: HUB520; Steel Option: HUB523Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.