The Criterium is already a super fast rolling tire with impressive cornering control. This model's silk (seta) casing enhances the tires suppleness for an even more extraordinary ride. Seta Ultra S Use: Road Racing Size: 28 Tyre Width: 23 or 25 mm Internal Rim Width: (23mm) 13-15 mm (25mm) 13-17 mm Weight: (23mm) 260 gr (25mm) 270g Casing: Silk SEALED Flat protection: PPS BAR: 7-12 PSI: 100-175 Inner tube: latex
SRAM eTap BlipsAdjust your gears with just the touch of a button, thanks to the eTap Blips from SRAM. Designed for use with Time Trial (TT) bikes or eTap shifters on triathlon bikes, these handy gadget does all the hard work for you, without you needing to change your riding position. Features:Compatible With: SRAM RED® eTap shift/brake controls, BlipBox Aero cockpit control, SRAM 11-Speed compatibleMultiple mounting options for drop and aero barsWire Length: 150mm, 230mm, 450mm, 650mmPart No: ES-EAC-BLIP-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Packable windbreaker. Fango folds into it's own pocket to make it an ideal carry for wind and light rain protection. WINDPROOF AND RAIN RESISTANT Made with the 2 layer Tovel Bio Zerowind® membrane fabric, ideal for wind and light rain protection. POCKETABLE AND ECO-FRIENDLY PACKAGING The jacket can be easily folded into its back pocket so you can pack it during rides. This self-storage system is also used as the poduct's packaging, reducing plastic waste. HIGH-VISIBILITY Reflective band on back pockets for extra safety in low visibility.
Packable windbreaker. Fango folds into it's own pocket to make it an ideal carry for wind and light rain protection. WINDPROOF AND RAIN RESISTANT Made with the 2 layer Tovel Bio Zerowind® membrane fabric, ideal for wind and light rain protection. POCKETABLE AND ECO-FRIENDLY PACKAGING The jacket can be easily folded into its back pocket so you can pack it during rides. This self-storage system is also used as the poduct's packaging, reducing plastic waste. HIGH-VISIBILITY Reflective band on back pockets for extra safety in low visibility.
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Disc BrakeIt has a championship-winning pedigree, and is ready to take all of the punishment you want to give it. Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimised specifically for cross-country and light trail use.Power and modulation are delivered via the Level TLM's alloy lever blade, DirectLink actuation, DOT 5.1 fluid and SRAM's new two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and Bleeding Edge technology makes maintenance incredibly simple, so your brakes feel great all day, every day.Please Note: A handlebar clamp is not included with this item.Please Also Note: These levers are can be used as a left hand or a right hand brake as they have an ambidextrous design and a bleed port on both sides.Features: Lever Material: Forged aluminium Caliper Design: Monoblock 2-piston caliper Caliper Style: Post Mount Finish: Dark Grey Pad: Steel-backed organic Fluid: DOT 5.1 Adjustment: Tooled reach adjust Material: Aluminium Pad/Holder: Top loading Intended Use: XC, Trail System: Open system Bend Zone: Yes Ambidextrous: Yes Hardware: Stainless Steel Please Note: A handlebar clamp is not included with this item Weight: 356gTechnologies: Bleeding Edge: New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding, dedicated bleed adapter for the S4 caliper plugs into the bleed port and seals the system to minimise air contamination and fluid loss. Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields break the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Bell Super changed the game for trail, enduro and all mounting biking when it introduced the first of the new generation detachable chin guards with the original Bell Super. The super has come a long way since then, and the Super 3 is continuing to push the boundaries of mountain bike helmet capabilities.Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmetFloat Fit - A minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustmentsX-Static padding: Quick-drying materials, woven with real silver fibers, inhibit growth of odor-causing bacteria and fungi23 helmet vents, 4 brow portsGoggleGuide adjustable visor: accommodates both goggles and glassesThe Super 3 features a new off-road specific Float Fit System that is more comfortable, lighter and features a rubber overmolded dial for easy adjusting, along with a revised shape inside and out giving the Super 3 a better feel and fit than ever before. Retaining its iconic off-road style with extended rear protection, the Super 3 also features a GoggleGuide adjustable visor, Overbrow Ventilation to help keep you cool, a breakaway camera mount and is compatible with the removable lock-on Super 3R Chin Bar.Size Chart:
Coveta off-road mountain biking helmet features a high protection in-mould polycarbonate shell with removable moto-style visor to keep you protected while the AirFlow ventillation system helps you stay cool. GoPro compatible so you can share your adventures and integrated magnetic light mount for the option of increased visibility. Off road comfort and performance. Protected for 12 months by Liv's Helmet Crash Replacement Service FeaturesProtection: Low density EPS foam and in-mould polycarbonate shell and MipsFit system: Cinch Pro™ and LiteForm™ webbingVentilation: AirFlow ventilation systemPadding: TransTextura Plus™ anti-microbial padsExtra: GoPro compatible and integrated magnetic light mountSizes: S (51-55cm) M (55-59cm) L (59-63cm)Colour: White/GreyProtected for 12 months by Giant's Helmet Crash Replacement Service
Packable windbreaker. Nebula Puro folds into it's own pocket to make it an ideal carry for wind and light rain protection. Windproof And Rain Resistant Made with the 2 layer Tovel Bio Zerowind membrane fabric, ideal for wind and light rain protection. Pocketable and Eco-Friendly Packaging NEBULA PURO can be easily folded into its back pocket so you can pack it during rides. This self-storage system is also used as the poduct's packaging, reducing plastic waste. High Visibility Reflective band on back pockets for extra safety in low visibility. How to take care of your Santini cycling and triathlon wear Here are a few of the secrets that we've learned over the years to keep your kit performing at its best and last longer. Wash it at 30°C / 86°F Do not use fabric conditioner Avoid the tumble drier Avoid using washing powder, favor liquid detergent Turn the garment inside out Wash similar colours together Wash straight away Do not iron
SRAM eTap BlipsAdjust your gears with just the touch of a button, thanks to the eTap Blips from SRAM. Designed for use with Time Trial (TT) bikes or eTap shifters on triathlon bikes, these handy gadget does all the hard work for you, without you needing to change your riding position. Features:Compatible With: SRAM RED® eTap shift/brake controls, BlipBox Aero cockpit control, SRAM 11-Speed compatibleMultiple mounting options for drop and aero barsWire Length: 150mm, 230mm, 450mm, 650mmPart No: ES-EAC-BLIP-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.