Disc lock with case-hardened 1/2 inch Kryptonium steel shackle for maximum security 14 mm hardened MAX-Performance steel shackle resists cutting and leverage attacks Double deadbolt locking mechanism for extensive holding power High security disc style cylinder with more then a million key variations Reinforced anti-drill anti-pull cylinder protection system Sliding dustcover protects and extends cylinder life 3 keys: one lighted with high intensity bulb and replaceable battery Colour: yellow Supplied with a handy carry pouch and disc lock reminder cable
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
Fleece pullover sweat shirt from Doomed with logo on front.
Nylon crinkle 330 100% nylon jacket from Stay Strong with 100% polyester mesh lining and full zip with refective print on front and back.
When you're charging headlong down steep downhill trails and tackling challenging enduro races, the Culvert Shoes, with their Michelin rubber OCX 4 sole, ensure you're confidently in control on your pedals. This performance rubber sole is the stickiest in the Etnies line and has some 3 times as much cushioning and shock-absorption as a standard sole unit. Ideal for riding fast. When you're hitting big drops, whipping gaps and speeding across rough terrain, the moulded polyurethane Pro Foam 1 footbed soaks up high impacts, keeping your feet protected. For trail sections that require more pedalling, the TPU moulded Pedal Shank 2 gives positive energy transfer while also adding protection from big impacts. The upper of the Culvert fuses the Etnies Force Shield design with hot-melted toe and heel cap protection. This reinforced design is not only tough but also provides you with excellent foot support and prevents the upper from bagging out from riding. All-condition durability is also built-in. Firstly a Repel treatment fends off moisture when the weather turns damp and drizzly. Then the 3M Thinsulate™ lining ensures cosy comfort on cooler days too. A tongue gusset is also present, keeping out dirt and pebbles kicked up off the trail.
Etnies Culvert ShoesCreated to take on enduro and downhill mountain biking, the Etnies Culvert Shoes feature a tough but comfy upper matched with a super-sticky Michelin sole unit.When you're charging headlong down steep downhill trails and tackling challenging enduro races, the Culvert Shoes, with their Michelin rubber OCX 4 sole, ensure you're confidently in control on your pedals. This performance rubber sole is the stickiest in the Etnies line and has some 3 times as much cushioning and shock-absorption as a standard sole unit. Ideal for riding fast. When you're hitting big drops, whipping gaps and speeding across rough terrain, the moulded polyurethane Pro Foam 1 footbed soaks up high impacts, keeping your feet protected. For trail sections that require more pedalling, the TPU moulded Pedal Shank 2 gives positive energy transfer while also adding protection from big impacts. The upper of the Culvert fuses the Etnies Force Shield design with hot-melted toe and heel cap protection. This reinforced design is not only tough but also provides you with excellent foot support and prevents the upper from bagging out from riding.All-condition durability is also built-in. Firstly a Repel treatment fends off moisture when the weather turns damp and drizzly. Then the 3M Thinsulate™ lining ensures cosy comfort on cooler days too. A tongue gusset is also present, keeping out dirt and pebbles kicked up off the trail.Features:Action Nubuck/SyntheticSticky Michelin compound provides excellent pedal and surface gripForce Shield reinforced upperHot-melted toe and heel capRepel treated upper blocks moisture - 3M Thinsulate™ liningTongue Gussets shields moisture, dirt and pebblesThe Lace Pocket on top of the tongueTPU moulded Pedal Shank 2 in the midsolePro Foam 1 moulded PU footbedDie-Cut EVA foam midsoleBuy Etnies Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Etnies Culvert ShoesCreated to take on enduro and downhill mountain biking, the Etnies Culvert Shoes feature a tough but comfy upper matched with a super-sticky Michelin sole unit.When you're charging headlong down steep downhill trails and tackling challenging enduro races, the Culvert Shoes, with their Michelin rubber OCX 4 sole, ensure you're confidently in control on your pedals. This performance rubber sole is the stickiest in the Etnies line and has some 3 times as much cushioning and shock-absorption as a standard sole unit. Ideal for riding fast. When you're hitting big drops, whipping gaps and speeding across rough terrain, the moulded polyurethane Pro Foam 1 footbed soaks up high impacts, keeping your feet protected. For trail sections that require more pedalling, the TPU moulded Pedal Shank 2 gives positive energy transfer while also adding protection from big impacts. The upper of the Culvert fuses the Etnies Force Shield design with hot-melted toe and heel cap protection. This reinforced design is not only tough but also provides you with excellent foot support and prevents the upper from bagging out from riding.All-condition durability is also built-in. Firstly a Repel treatment fends off moisture when the weather turns damp and drizzly. Then the 3M Thinsulate™ lining ensures cosy comfort on cooler days too. A tongue gusset is also present, keeping out dirt and pebbles kicked up off the trail.Features:Action Nubuck/SyntheticSticky Michelin compound provides excellent pedal and surface gripForce Shield reinforced upperHot-melted toe and heel capRepel treated upper blocks moisture - 3M Thinsulate™ liningTongue Gussets shields moisture, dirt and pebblesThe Lace Pocket on top of the tongueTPU moulded Pedal Shank 2 in the midsolePro Foam 1 moulded PU footbedDie-Cut EVA foam midsoleBuy Etnies Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Etnies Culvert ShoesCreated to take on enduro and downhill mountain biking, the Etnies Culvert Shoes feature a tough but comfy upper matched with a super-sticky Michelin sole unit.When you're charging headlong down steep downhill trails and tackling challenging enduro races, the Culvert Shoes, with their Michelin rubber OCX 4 sole, ensure you're confidently in control on your pedals. This performance rubber sole is the stickiest in the Etnies line and has some 3 times as much cushioning and shock-absorption as a standard sole unit. Ideal for riding fast. When you're hitting big drops, whipping gaps and speeding across rough terrain, the moulded polyurethane Pro Foam 1 footbed soaks up high impacts, keeping your feet protected. For trail sections that require more pedalling, the TPU moulded Pedal Shank 2 gives positive energy transfer while also adding protection from big impacts. The upper of the Culvert fuses the Etnies Force Shield design with hot-melted toe and heel cap protection. This reinforced design is not only tough but also provides you with excellent foot support and prevents the upper from bagging out from riding.All-condition durability is also built-in. Firstly a Repel treatment fends off moisture when the weather turns damp and drizzly. Then the 3M Thinsulate™ lining ensures cosy comfort on cooler days too. A tongue gusset is also present, keeping out dirt and pebbles kicked up off the trail.Features:Action Nubuck/SyntheticSticky Michelin compound provides excellent pedal and surface gripForce Shield reinforced upperHot-melted toe and heel capRepel treated upper blocks moisture - 3M Thinsulate™ liningTongue Gussets shields moisture, dirt and pebblesThe Lace Pocket on top of the tongueTPU moulded Pedal Shank 2 in the midsolePro Foam 1 moulded PU footbedDie-Cut EVA foam midsoleBuy Etnies Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Supertype Seatpost - SilverSharp looking CNC'd seatpost with etched height markings: Miche seatpost is forged from 6062 alloy, CNC finished, brush polished and then anodised. The patented saddle locking system guarantees safety.Features: 44mm wide rails 220mm (from rail to limit line) Diameter: 27.2mm Weight: 265g Buy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Sticky Michelin rubber compound provides excellent pedal and surface grip, Adjustable Power Strap for support, Force Shield reinforced upper, Hot-melted toe and heel cap, Repel treated upper blocks moisture, 3M Thinsulate lining, Tongue Gussets shields moisture, dirt and pebbles, Ankle Shield protects your inner ankle from the gears and bike frame, The Lace Pocket on top of the tongue, TPU molded Pedal Shank 2 in the midsole, Pro Foam 1 molded PU footbed, Die Cut EVA foam midsole, Nylon pull loop on heel.
The Race Face Covert Knee Guard are a highly breathable knee guard that has an ultra low profile CE certified D3O Ghost pad. All the protection, none of the bulk.D3O Ghost knee padMesh body with lycra rear gussetWoven elastic with gripper sewn into rear gussetRipstop knee coverSilicone grippers top and bottomSize Chart:
The Race Face Covert Knee Guard are a highly breathable knee guard that has an ultra low profile CE certified D3O Ghost pad. All the protection, none of the bulk.D3O Ghost knee padMesh body with lycra rear gussetWoven elastic with gripper sewn into rear gussetRipstop knee coverSilicone grippers top and bottomSize Chart: