The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
Innovative hidden multi tool that discretely and securely inserts into the opening of a handlebar. It’s constructed from lightweight, durable machined aluminium and features hardened steel tool bits. The kit is easily accessible for quick repairs and comes with seven different tool bits ideal for today’s modern bikes: 3, 4, 5, 6, 8mm Hex keys, Phillips screwdriver and T25 star bit. It also doubles as a bar end plug and comes with three o-ring sizes that secures it inside most handlebar openings.
The Triple8 Certified Sweatsaver Helmet was designed to offer everything you could ever want and need from a helmet, comfort, protection, impact absorption and sweat wicking it does it all. The first and only helmet to fully integrate the best of high impact absorbing EPS foam with thick dual-density foam and plush sweatsaver fabric. This helmet comes with two sets of liners so you can get the perfect fit with either the thinner or thicker set. The Triple8 Certified Sweatsaver Helmet complies with CE 1078, U.S. CPSC Safety Standard for Persons Age 5 and Older and ASTM F-1492 Skate safety standards. Size guide: X-Small/Small: 20" - 21.25" (51 -54cm) Small/Medium: 21" - 22.5" (53 - 57cm) Large/X-Large: 22.5" - 23.5" (57 - 60cm)
Pro-Te's Old School Cert Helmet was modified from their original 1973 Full-Tec design, still boasting that iconic retro shape and style that sits low on the head to feel more secure. The shell is constructed from high-impact ABS with an impact absorbing EPS foam liner designed to offer maximum protection against slams. The premium heat-sealed liner keeps you comfortable with an eleven vent design to vent out hot air and let cool air in. The Pro-Tec Old School Helmet complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. Sizing: XXX-Small: 47 - 49cm XX-Small: 49 - 51cm X-Small: 52 - 54cm Small: 54 - 56cm Medium: 56 - 58cm Large: 58 - 60cm X-Large: 60 - 62cm XX-Large: 62 - 64cm
SaltPlus Vertex FreeCoaster Driver - Black - LSD or RSD.
Innovative concealed mountain bike multi-tool that discretely and securely inserts into the opening of a handlebar. It’s constructed from lightweight, durable machined aluminium and features hardened-steel tool bits. The kit is easily accessible for quick repairs and comes with five (Small Kit), eight (Medium Kit) or 11 (Large Kit) different tool bits ideal for today’s modern bikes (see multiple options in Top Features). It also doubles as a bar-end plug and comes with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings.
Lezyne Tool Insert KitA durable, lightweight and versatile tool kit that conveniently stores inside the end of your mountain bike (MTB) handlebars. There are three different options that all include Hex, Torx and Phillips tool heads. The small version weighs only 54-grams and includes some essential tools for trail or roadside maintenance while the large version features a wider range of tool sizes.Innovative concealed mountain bike multi-tool that discretely and securely inserts into the opening of a handlebar. It's constructed from lightweight, durable machined aluminium and features hardened-steel tool bits. The kit is easily accessible for quick repairs and comes with five (Small Kit), eight (Medium Kit) or 11 (Large Kit) different tool bits ideal for today's modern bikes (see multiple options in Top Features). It also doubles as a bar-end plug and comes with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings. Features: Multiple Options: Large: HEX 2/3/4/5/6/8/10mm, TORX T10/T25/T30, PHILLIPS Medium: HEX 3/4/5/6/10mm, TORX T10/T25, PHILLIPS Small: HEX 4/5/10mm, TORX T25, PHILLIPS Weights: Large: 90g; Medium: 74g; Small: 54gBuy Lezyne Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Headset fits Epic SW / Marathon / Expert / Comp
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width