Ergon ST Gel Women's City-Touring Bike SaddleA comfort-focused saddle for female riders, this ST model comes equipped with orthopaedic foam padding and ST Gel inserts to ensure a quality, cushioned experience on every journey. Specially-shaped to suit the female anatomy, this excellent throne features a wide rear to support your lumbar and pelvic areas, while the squared-off nose assists with control and climbing. a shallow perineum-protecting channel also ups the comfort factor on this superb touring seat. Features:Padding: ST Gel Inserts and Orthopaedic Comfort FoamSuitability: Touring Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
It is perfect for touring and female riders who like to go the extra mile. Comfortable and stylish, its orthopaedic foam relieves your sit bones even on long distances. Equipped with gel pads for another layer of relaxation, this is the perfect upgrade for replacing your existing throne.
The gel pads guarantee additional comfort around the sit bones. As typical for Ergon, the relief surfaces are gender specific, reliably avoiding discomfort, numbness and paraesthesia.Seating Surface: The especially wide seating surface is made for tilted to slightly upright seating positions – the typical posture of a touring rider.Padding Construction: Orthopedic comfort padding with gel pads provides enhanced support and optimal pressure distribution.Large-Area Pressure Distribution: Provides optimal pressure distribution for sit and pelvic bones, the contoured surface area helps prevent saddle discomfort.Pronounced Relief Channel: Relief channel radiused surface helps to provide increased protection for soft-tissue areas.Nylon-Composite Saddle Shell: Unlike Ergon, most manufacturers use polypropylene shells with lower support strength.Nose: The slim cut nose offers the best possible legroom when pedalling. Shell: Nylon Composite, Rails: Light FeC Steel, Cover: Microfibre, Padding: Orthopaedic Comfort Foam with Gel Pads,.Size: Small/Medium: 9-12cm Sit bone width , Medium/Large: 12-16cm Sit bone width.
A unique tool to enable the precise installation of cleats on shoes ensuring maximum pedalling performance and comfort. Fine adjustment is easy due to grid markings on the toolIncludes a handbook with explanations of the ergonomic principles and biomechanic thinking behind the tool as well as 'expert tips' on pedalling technique.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.