Features:Shimano's Direct Mount compatible Rear Derailleur system gives more space around the rear frame dropout resulting in easier rear wheel removal but also allows frame designers to shorten chain stays, increase axel sizes and move suspension pivotsDirect Mount gives a simpler, cleaner lookDeore XT Shadow+ Dyna-Sys11 11-speed rear derailleur delivers reliable and precise shifting with a stiff and lightweight open designShadow+ features a super low profile design that reduces the risk of damage from trail side hazardsThe shadow plus chain stabilizer tension can easily be adjusted externally via a hex keyShadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shifting. This can be switched off to remove the wheelShadow design slant angle has been optimized for use with 40-46T sprocketsDirect cable routing prevents snagging from any trail side hazardsFour fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trailsHigh rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shiftStrong return spring for a positive shifting feelDurable sealed bearing pulleys40T (46T for 1x 11-speed) capacity GS cage
Tool specialist Wera presents Bicycle Set 8, a 7-piece 3/8" socket set with the most common Torx and Hex screws for bicycle maintenance and repairs. Supplied with a robust folding case for easy transport, this set is suitable for Road, MTB and E-Bikes.The long bit sockets feature an extra slim, cylindrical profile zone and ideal for low-located couplings, for example bottom bracket ball bearings or stem-fork clamping,They also feature knurling on the lower socket end for more grip when used manually,These sockets have Wera’s Hex-Plus technology, which means the tool has a greater contact area with the screw,Greater contact surface area allows you to apply up to 20% more torque,All Wera tools are covered by a lifetime guarantee.The long bit sockets feature an extra slim, cylindrical profile zone and ideal for low-located couplings, for example bottom bracket ball bearings or stem-fork clamping. They also feature knurling on the lower socket end for more grip when used manually.These sockets have Wera’s Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle.This set also features Wera’s Take it Easy colour coded tool size finder system, meaning its quick to identify which size tool you need for the job.Set Includes:5 x Zyklop 3/8" 8740 B Hex Plus 107mm Bit Socket (4mm, 5mm, 6mm, 8mm, 10mm),2 x Torx 8767 B 107mm bits (TX25, TX30),1 x Highly robust and durable textile case.Technical Specification:Size: 150mm x 135mm x 40mm,Set Weight: 580g.
This Box Three rear mech simplifies the features found on the Prime 9 Box One and Two model's, making for a fully-featured value for money rear derailleur. Including a Limited Slip Clutch, Sealed bearing pulleys and a solid construction, the Box Three rear mech is compatible with 11-46 and 11-50t derailleurs making it one of the most versatile derailleur offerings for Prime 9. Compatibility: • Box One Prime 9 11-50T Cassette Black • Box Two Prime 9 11-50T Cassette Black • Box Three Prime 9 Cassette Black • Box One Prime 9 Chain 126L DLC Black • Box Two Prime 9 126 Link Chain Nickel • Box Three Prime 9 126 Link Chain Polished • Box One Prime 9 Shifter Black • Box Two Prime 9 Shifter Black • Box Three Prime 9 Shifter Black FAQ: Are Box Prime 9 derailleurs compatible with Shimano "direct mount" hangers? No, Shimano direct mount hangers are proprietary and are not compatible with Box derailleurs. Is the Box Three Prime 9 Derailleur compatible with other 9 speed components? No, traditional 9 speed systems use a Cable Pull that is not compatible with Prime 9. Are Box Prime 9 derailleurs compatible with drop bar (road) shifters? No, Box Prime 9 derailleurs are not currently compatible with drop bar shifters, but we do offer a clamp for our shifters to mount on some 31.8mm drop handle bars. How should I clean my Box Three Prime 9 derailleur? We suggest removing the derailleur from the bike and using a soft bristle brush or rag with soapy water or a mild de-greaser. We do not recommend pressure washing, strong solvents or de-greasers as they could degrade the surface coating.
Box Three Prime 9 Speed Rear DerailleurThis Box Three rear mech simplifies the features found on the Prime 9 Box One and Two model's, making for a fully-featured value for money rear derailleur. Including a Limited Slip Clutch, Sealed bearing pulleys and a solid construction, the Box Three rear mech is compatible with 11-46 and 11-50t derailleurs making it one of the most versatile derailleur offerings for Prime 9.FAQ:Are Box Prime 9 derailleurs compatible with Shimano "direct mount" hangers? No, Shimano direct mount hangers are proprietary and are not compatible with Box derailleurs.Is the Box Three Prime 9 Derailleur compatible with other 9 speed components? No, traditional 9 speed systems use a Cable Pull that is not compatible with Prime 9.Are Box Prime 9 derailleurs compatible with drop bar (road) shifters? No, Box Prime 9 derailleurs are not currently compatible with drop bar shifters, but we do offer a clamp for our shifters to mount on some 31.8mm drop handle bars.How should I clean my Box Three Prime 9 derailleur? We suggest removing the derailleur from the bike and using a soft bristle brush or rag with soapy water or a mild de-greaser. We do not recommend pressure washing, strong solvents or de-greasers as they could degrade the surface coating.Features: Material: Aluminium, Glass Fibre / Nylon Composite, Steel with matte finish Limited Slip Clutch Bearing Pulleys Nylon Composite Knuckle Direct Channel Cable Stay Die Cast Linkages Stamped Inner and Outer Cage Prime 9 Technology Compatible with Standard Derailleur Hangers (Non Direct-Mount)Compatibility: Box One Prime 9 11-50T Cassette Black Box Two Prime 9 11-50T Cassette Black Box Three Prime 9 Cassette Black Box One Prime 9 Chain 126L DLC Black Box Two Prime 9 126 Link Chain Nickel Box Three Prime 9 126 Link Chain Polished Box One Prime 9 Shifter Black Box Two Prime 9 Shifter Black Box Three Prime 9 Shifter BlackWeight: 349gBuy Box Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Advanced shifting performance provides the confidence to enjoy any trailLow-profile designExtra wide range 12-speed drivetrain -10-51T (12-speed) -10-45T(12-speed)Decreased rear derailleur and chain tension in low gearNew bumper added to rear derailleur pulley cageBigger 13T pulleyShimano have pulled out all the stops to provide you with a derailleur that provides super smooth shifting performance that s fast and without any nasty shocks or noises. The larger 13T pulleys increase efficiency and chain management while compatibility with SHIMANO's new 12-speed cassettes boosts the range of gears you can now benefit from.
Designed to go fast, the Osprey Seral 4 Hydration Waist Pack is a bike-specific lumbar pack featuring an internal hydration reservoir. Complete with the essential features for a day on the trail while also staying out of the way during the technical phases of your ride, Seral 4 is an excellent lightweight companion for time in the saddle. Seral 7 boasts a ventilated AirScape™ back panel, providing comfort and airflow throughout, whilst the ventilated mesh hip-belt with pockets gives a close and stable fit. An ErgoPull waist strap closure system further allows for a snug and stable fit. Inside, a specially designed Hydraulics™ LT Lumbar 1.5L Reservoir sits inside a sleeve, allowing plenty of space to store accessories, snacks and tools. The reservoir hose wraps around the body and magnetically attaches to the hip-belt, remaining out of the way until it’s needed. Finally, the blinker light attachment point and reflective graphics will ensure you remain seen during your night-time rides.
Bite Me. Designed to go fast, the Seral 7 is a bike-specific lumbar-pack featuring an internal hydration reservoir. Complete with the essential features for a day on the trail while staying out of the way during the technical phases of your ride, Seral is an excellent lightweight companion for time in the saddle.Seral features a ventilated AirScape™ backpanel, providing comfort and airflow throughout, whilst the ventilated mesh hipbelt with pockets gives a close and stable fit. Dual compression straps on either side further improve the packs fit and stability during active riding. Inside, a specially designed Hydraulics Lumbar 1.5L Reservoir sits inside a sleeve, allowing plenty of space to store clothing, snacks and tools. The reservoir hose wraps around the body and magnetically attaches to the hipbelt, remaining out of the way until it’s needed. A front-panel pocket provides some organisation, including a scratch-free pocket for electronics or glasses, and a mesh pouch with key-clip. Finally, the lower LED Light attachment point and reflective graphics will help you be seen during your night-time rides.Key Features:180 degree on/off bite valve,AirScape™ backpanel with foam ridges for comfort and fit,Bite Valve offers fast, smooth water delivery,Front zippered pocket,Internal hydration sleeve,Internal key attachment clip,Internal mesh side pocket,Internal organisation pocket,LED light attachment point,Reflective graphics,Side compression straps,Twin zippered hip belt pockets,Zippered scratch-free sunglasses and electronics pocket.NOTE: Does Not Include Hydration pack
This is the jersey that brings Castelli's fabric and construction engineering together in one of the most refined jerseys we've ever made. The goal with this jersey was to make it as light as possible without sacrificing transparency, sun protection and convenient features like a zippered key pocket. We've brought in a new fabric that we call Oltre, which roughly translates to beyond, and it really goes beyond what you normally find in a jersey, with the horizontal stripes giving great breathability and stretch while providing good support for the pockets. The jersey will do double duty in your wardrobe: It's the jersey to reach for on hot days or big climbing days in the mountains. But it's also the jersey you'll pull out when you just want to look good, thanks to the no-sew construction around the sleeves and hem and the close attention to detail in every stitch, seam and component. It's designed with a fit that is close to body but slightly more relaxed than our race jerseys. Features: The deluxe, impossibly lightweight performance jersey Oltre 70g stripe mesh base fabric Stretch woven pocket reinforcement No-sew welded sleeve and waist trim Floating pocket construction with 3 main pockets and zippered key pocket YKK® zipper Sublimated overprint Superleggera logo on back 22°-40°C / 70°-104°F Weight: 111g
LEVEL Ceramic Oversized Jockey Wheel SystemThe LEVEL jockey wheel system optimises drivetrain performance by utilising oversized pulley wheels working in tandem with incredibly low friction ceramic bearings. Compatible with Shimano 9100/9150/R8000/R8050 rear derailleurs, the increased efficiency of the LEVEL pulley wheel system helps to shave off those crucial seconds that could be the difference between victory or smashing those PBs. -Black/Red-12T Upper and 16T Lower alloy oversized pulley wheels with ceramic coated bearings for maximum efficiency-Weight: 76gPlease note: The oversized jockey wheel system is NOT compatible with previous iterations of Shimano derailleurs, 105 R7000 series nor with derailleurs equipped with a clutch system.Only compatible with Dura-Ace 9100/9150 Di2 & Ultegra R8000 or R8050 Di2 derailleursMaximum gear capacity (Lower Gear) 28TMinimum gear capacity (Upper Gear) 11TWe recommend you fit a new chain when installing this product; the oversized pulley wheel system will require a slightly longer chain length for the drivetrain to function correctly.
What’s Included Wave Solo Protective carrying pouch USB-A to USB-C cable Updated Design The Wave Solo is a modern take on traditional ball rollers. The Wave Solo has a firm and small targeted shape that is easy to transport with a design that mimics that lacrosse ball that athletes have used to release soreness and tension for decades. This updated design has added vibration and specialised engineering that dampens the pain often found with massage balls when they are used to dig deep into the muscle. QuietRoll Technology Great for using anywhere, the ball comes with Theragun’s innovative QuietRoll Technology which effectively mutes any reverberation from the device to the surrounding environment – redirecting all of that powerful vibration to your body. Customised Vibration The balls come with 3 powerful vibration frequencies which can all be adjusted to your comfort level to help release soreness, reduce tension, increase range of motion, and improve movement in general. Smart Connectivity Via Bluetooth®, the Wave Solo can easily be connected to the Therabody app which allows you to take total control of your rolling experience. You can use the app to adjust vibration intensity and discover guided rolling recovery routines specifically tailored to your specific needs. Specifications Dimensions: 3.4in (8.6cm) diameter Weight: 0.7lbs (0.3kg) Material: Textured silicone outer Battery Life: 200 minutes
Tough aggressive and light weight Dyna-Sys11 11-speed SLX rear derailleur using revolutionary features from XT and XTR at an affordable price pointShimano's Direct Mount compatible Rear Derailleur system gives more space around the rear frame dropout resulting in easier rear wheel removal but also allows frame designers to shorten chain stays increase axel sizes and move suspension pivotsShadow Dyna-Sys11 11-speed rear derailleur delivers reliable and precise shifting with a stiff and lightweight open designShadow features a super low profile design that reduces the risk of damage from trail side hazardsThe shadow plus chain stabilizer tension can easily be adjusted externally via a hex keyShadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shifting. This can be switched off to remove the wheelShadow design slant angle has been optimized for use with 40-46T sprocketsDirect cable routing prevents snagging from any trail side hazardsFour fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trailsHigh rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shiftStrong return spring for a positive shifting feelDurable sealed bearing pulleysMax low sprocket: 42T (double) 46T (single)Total capacity: 41T
XTR Dyna-sys 11-speed M9000 hosts a whole load of new technology keeping at the forefront of front derailleurs, it's truly the elite racers choice.Designed specifically with modern trail bikes in mind, Shimano's XTR side swing technology front derailleur increases tyre clearance by 15mm, while new cable routing resulting in the lightest shifting action yet.Key Features:Side swing - side pull front derailleurs allow bike manufactures to continuously push frame design without limitation.,Light alloy cage reduces weight and improves performance, nickel-plated finish prevents chain wear.,Developed specifically for triple chainsets and frames with a direct mount.,Side pull cable routing.,40T maximum top gear, 18T total capacity.,Dyna-Sys 11-speed design - for use with Dyna-Sys 11-speed drivetrains..