The Challenger is the new endurance tyre from Hutchinson. Complete peace of mind, all year round. A tyre with no compromises, delivering exceptional performance in terms of longevity, comfort and safety. Created after extensive research and development from Hutchinson, the Challenger has been designed as a do-it-all tire capable of the demands of everyday training, Gran Fondo riding and ultra-endurance adventures.The ultimate long-distance tyrePrioritises longevity, comfort and safetyReinforced to protect the treadBi-compound to provide good grip and an extended lifespanTube Type (TT), fits standard rims with inner tubeBead: FoldingReinforced (RF), 100% polyamide puncture reinforcement under the trade. 25% increase in puncture resistance without significant weightBi-compoundAll of this comes with hardly any weight penalty, a 25mm tyre weighing in at just 255g, even lighter than the competition. A new Hutchinson s Bi-Compound rubber offers a harder compound in the centre of the tyre designed to resist cuts and abrasion. This is matched with a softer lateral compound and grooved tread for superior grip when cornering on both wet and dry roads. A 66 TPI casing offers the perfect ratio of weight, protection and rolling resistance.
The Challenger is the new endurance tyre from Hutchinson. Complete peace of mind, all year round. A tyre with no compromises, delivering exceptional performance in terms of longevity, comfort and safety. Created after extensive research and development from Hutchinson, the Challenger has been designed as a do-it-all tire capable of the demands of everyday training, Gran Fondo riding and ultra-endurance adventures.The ultimate long-distance tyrePrioritises longevity, comfort and safetyReinforced to protect the treadBi-compound to provide good grip and an extended lifespanTube Type (TT), fits standard rims with inner tubeBead: FoldingReinforced (RF), 100% polyamide puncture reinforcement under the trade. 25% increase in puncture resistance without significant weightBi-compoundAll of this comes with hardly any weight penalty, a 25mm tyre weighing in at just 255g, even lighter than the competition. A new Hutchinson s Bi-Compound rubber offers a harder compound in the centre of the tyre designed to resist cuts and abrasion. This is matched with a softer lateral compound and grooved tread for superior grip when cornering on both wet and dry roads. A 66 TPI casing offers the perfect ratio of weight, protection and rolling resistance.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Threaded 30mm MTB Bottom BracketHope’s threaded external bottom bracket is made from machined aluminium and kitted out with sealed cartridge bearings. This 30mm version is designed for use with chainsets with the larger 30mm spindle size, for more efficient power transfer. Suitable for all bike types, this smooth spinning component has advanced labyrinth seals to prevent water and dirt getting inside and to increase its durability.Features: Type: English Thread external type Bearings: Stainless Steel cartridge bearings BB Shell: BSA Thread BB Shell Frame Width Compatibility: 68mm, 73mm, 83mm, 100mm and 120mm Crank Spindle/Axle Diameter: 30mm Compatibility: All cranks with 30mm axles External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag Cartridge bearings are replaceable Please Note: Specific fitting tool (HTT188) needed to fit bottom bracket (sold separately) Manufacturer Reference Number: BBSS30N Weight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Created to easily transition from the road to the trail, the Hoka One One Challenger ATR 7 Trail Shoes have been completely redesigned from the ground up. A simplified engineered mesh upper provides an agile performance that is lighter than the previous model with good breathability to keep your feet cool as you pick up the pace. An extended heel pull offers easy entry and the traditional lacing system with recycled polyester laces offers a secure fit that is enhanced by the moulded EVA sockliner. The CMEVA midsole features an increased stack height for a plusher running experience that absorbs impact shock while the durable Durabrasion rubber outsole with 4mm lugs offers exceptional traction and performance on whatever surfaces you are running on. Smaller tightly spaced lugs in the centre and larger, more aggressive lugs at the perimeter offer road performance and versatile trail grip.
Created to easily transition from the road to the trail, the Hoka One One Challenger ATR 7 GTX Trail Shoes have been completely redesigned from the ground up. Featuring waterproof Gore-Tex with a simplified engineered mesh upper, these shoes keep the rain at bay and provide an agile performance that is lighter than the previous model with good breathability to keep your feet cool as you pick up the pace. An extended heel pull offers easy entry and the traditional lacing system with recycled polyester laces offers a secure fit that is enhanced by the moulded EVA sockliner. The CMEVA midsole features an increased stack height for a plusher running experience that absorbs impact shock while the durable Durabrasion rubber outsole with 4mm lugs offers exceptional traction and performance on whatever surfaces you are running on. Smaller tightly spaced lugs in the centre and larger, more aggressive lugs at the perimeter offer road performance and versatile trail grip.
Created to easily transition from the road to the trail, the Hoka One One Women's Challenger ATR 7 Trail Shoes have been completely redesigned from the ground up. A simplified engineered mesh upper provides an agile performance that is lighter than the previous model with good breathability to keep your feet cool as you pick up the pace. An extended heel pull offers easy entry and the traditional lacing system with recycled polyester laces offers a secure fit that is enhanced by the moulded EVA sockliner. The CMEVA midsole features an increased stack height for a plusher running experience that absorbs impact shock while the durable Durabrasion rubber outsole with 4mm lugs offers exceptional traction and performance on whatever surfaces you are running on. Smaller tightly spaced lugs in the centre and larger, more aggressive lugs at the perimeter offer road performance and versatile trail grip.
Created to easily transition from the road to the trail, the Hoka One One Challenger ATR 7 Trail Shoes have been completely redesigned from the ground up. A simplified engineered mesh upper provides an agile performance that is lighter than the previous model with good breathability to keep your feet cool as you pick up the pace. An extended heel pull offers easy entry and the traditional lacing system with recycled polyester laces offers a secure fit that is enhanced by the moulded EVA sockliner. The CMEVA midsole features an increased stack height for a plusher running experience that absorbs impact shock while the durable Durabrasion rubber outsole with 4mm lugs offers exceptional traction and performance on whatever surfaces you are running on. Smaller tightly spaced lugs in the centre and larger, more aggressive lugs at the perimeter offer road performance and versatile trail grip.