The flagship piece of Endura’s Aero collection the Encapsulator Suit™ represents the pinnacle of aerodynamic cycle-wear for the rider who is obsessed with speed. Using Drag2Zero’s (D2Z) cutting edge technology the skin suit has been proven on multiple UCI WorldTour races. On the track the suit has helped Alex Dowsett Bridie O’Donnell and Vittoria Bussi break the UCI Hour Records and leave their mark in cycling history.Over 80 different skin suits have been created tested and remastered to reach the point where we are finally content to release it to the wider market. Optimised for speeds over 45kph and in a TT position the Encapsulator Suit™ is the go-to piece for any time trial rider looking to reach a new level. Optimised For Time Trial Bike Speed Range 46-58KPH (28-36MPH)While most brands test at one single speed Endura Drag2Zero® understands the critical variations in aerodynamic efficiency at different speeds and in different riding positions. As an example a suit optimised for a TT rider averaging 50kph in an aggressive aero position is not necessarily the fastest suit for a rider on a road bike chasing a sportive PB averaging 35kph. Developing the Endura D2Z® range around this broader philosophy has resulted in products which are finely tuned to the requirements of the target rider not only faster at one selected data point but across a range of speeds. Surface Silicone Topography – SST™This exclusive patent pending technology has been developed by Endura in close collaboration with Simon Smart of Drag2Zero® and validated by the world’s top road riders on the UCI WorldTour. SST™ is the result of years of R & D studying airflow in wind tunnel alongside the development of new production methods to bring theoretical ideas to real world riding. Strategically positioned 3D chevrons positively affect airflow around the body reducing drag at the speeds relevant to the target rider. Encapsulator PocketInitially banned then accepted by the UCI the Encapsulator pocket has had a short but controversial life. The super fine translucent mesh allows race numbers to be clearly visible while retaining the breathability of the pocket area around the number. Providing a simple solution to the challenge of neatly attaching a race number the Encapsulator pocket also protects the delicate fabrics from the damage caused by pins. 1000 Series (Aero) Seat PadThe 1000 series Italian stretch pad features is sculpted from a single block of foam so unlike traditional layered pads there are no clunky steps in pad thickness. The BioCeramic® high stretch fast wicking face fabric incorporates a permanent antibacterial finish completing one of the most advanced pads in existence. The “Aero” version of the pad used in the D2Z® Encapsulator Suit™ is specially shaped to suit a more aggressive riding position. Multi Fabric ConstructionEndura’s vast experience of garment construction and rigorous pursuit of “faster” fabrics comes together in the D2Z® apparel collection. The D2Z® Encapsulator Suit™ deploys 5 different fabrics in combination to meet the demands of fit comfort durability and aerodynamic efficiency. 90 Day Satisfaction GuaranteeSo confident are we in this product that if you are not entirely satisfied with it we offer a no-quibble refund or replacement within 90 days of purchase. Optimised for TT position speed range; 46 to 58kph This product has been #BannedByTheUCI Multi fabric construction with Surface Silicone Topography (SST™) sleeve and flank panels for aero optimisation Encapsulator race number pocket and leg gel pocket Raw edge hems with super fine silicone grippers 1000 Series Aero Pad with computer cut “Continuously Variable Profile” (CVP) Hand-sewn in Scotland Construction Nylon 70% Polyester 20% Elastane 10% Fabrics & Technologies
Designed for speed this helmet comes with a Koroyd® core for lightweight protection a detachable tail section and a full anti-fog visor. Key Benefits Integrated Koroyd® core for superior lightweight breathable protection Easily detached snap on/off tail section Large front vents for increased airflow Full visor with anti-fog treatment with magnetic attachments One-hand micro-adjustment fit system Antibacterial fast wicking spacer fabric padding EVA carry case and helmet bag included Covered by Endura’s Crash Replacement Policy and Endura Product Guarantee Certified to CE standard EN 1078+A1 (02/2013)
A pro level aero race suit from Endura featuring multi fabric construction with Surface Silicone Topography (SST™) sleeves for aero optimisation. High wicking main body fabric with coldblack® technology UPF 50+ protection and mesh side panels manage body temperature Wind tunnel tested technology minimizes drag Quick dry water repellent Continuously Variable Profile (CVP) high stretch QDC Tri Series pad with exclusive water expelling DisperseFoam™ Selectively bonded seam construction eliminates chafing Bonded flush integrated rear pocket and gel wrapper pocket on back thigh 3D printed silicone grippers 90 day Satisfaction Guarantee Construction Polyester 80% Elastane 17% Nylon 3%
Pro Level Aero Race SuitKey Features:Multi fabric construction with Surface Silicone Topography (SST™) sleeves for aero optimisation,High wicking main body fabric with coldblack® technology, UPF 50+ protection and mesh side panels manage body temperature,Wind tunnel tested technology minimizes drag,Quick dry, water repellent, Continuously Variable Profile (CVP), high stretch QDC Tri Series pad with exclusive water expelling DisperseFoam™,Selectively bonded seam construction eliminates chafing,Bonded, flush integrated rear pocket and gel wrapper pocket on back thigh,3D printed silicone grippers,.
Updated for AW21 the MT500 Waterproof One Piece II do-it-all foul-weather onesie just got even better. Collection of choice for Dowhill Legends the Athertons. Guaranteed to put a smile on your face the serious tech at its heart is ready to be deployed when nothing else is up to the job. This updated design features an all new construction providing a more secure yet accomodating waist fit better protection in the critical rear spray area and more of a 'jacket and pant look'. This one-piece all-mountain suit reminds you that the worst weather can deliver the best days. For all you guys that like to get 'downright dirty'! PFC-Free and built to last this product now also has strong environmental credentials and is MADEKIND. ExoShell40DR™The fabric at the heart of the killer new MT500 waterproof collection boasts the same category leading breathability and waterproof ratings as the standard ExoShell40 but with the durability (DR) dialled up to tackle the harshest mountain terrain. A tough durable outer layer is laminated with a soft touch high wicking mesh inner layer that efficiently moves moisture away from your skin and through the super fine fluorine free membrane sandwiched in the middle. As with all of Endura's waterproofs ExoShell40DR™ is treated with an environmentally friendly PFC free DWR treatment. This fabric is also certified as having been made in a way that eliminates harmful substances from the supply chain; ensuring that products are safe forconsumers workers and the environment. This means that the only trace you will leave on the mountain is the tracks from your tyres. 90 Day Satisfaction GuaranteeSo confident are we in this product that if you are not entirely satisfied with it then we offer a no-quibble refund or replacement policy within 90 days of purchase. Exceptionally breathable and durable ExoShell40DR 3-Layer waterproof fabric in a fully seam-sealed construction One piece split front design for maximum mud protection and comfort fit Durable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel 3D adjustable helmet hood Ventilation by large underarm 2 way zipped vent extending onto back compatible with back pack and zip off lower legs for all day riding comfort Water-repellent front zip with storm flap Front pockets doubling as vents zipped lower hand pockets and sleeve pocket for lift pass Zipped fly with popper closure Soft touch lycra inner cuff for added comfort and protection • Reflective trims 90 Day Satisfaction Guarantee Construction Nylon 80% Polyester 15% Elastane 5% Technical aspects Waterproofness: 20000 Breathability: 40000 Fabrics & Technologies
The flagship piece of Endura’s Aero collection the Encapsulator Suit™ represents the pinnacle of aerodynamic cycle-wear for the rider who is obsessed with speed. Using Drag2Zero’s (D2Z) cutting edge technology the skin suit has been proven on multiple UCI WorldTour races. On the track the suit has helped Alex Dowsett Bridie O’Donnell and Vittoria Bussi break the UCI Hour Records and leave their mark in cycling history.Over 80 different skin suits have been created tested and remastered to reach the point where we are finally content to release it to the wider market. Optimised for speeds over 45kph and in a TT position the Encapsulator Suit™ is the go-to piece for any time trial rider looking to reach a new level. Optimised For Time Trial Bike Speed Range 46-58KPH (28-36MPH)While most brands test at one single speed Endura Drag2Zero® understands the critical variations in aerodynamic efficiency at different speeds and in different riding positions. As an example a suit optimised for a TT rider averaging 50kph in an aggressive aero position is not necessarily the fastest suit for a rider on a road bike chasing a sportive PB averaging 35kph. Developing the Endura D2Z® range around this broader philosophy has resulted in products which are finely tuned to the requirements of the target rider not only faster at one selected data point but across a range of speeds. Surface Silicone Topography – SST™This exclusive patent pending technology has been developed by Endura in close collaboration with Simon Smart of Drag2Zero® and validated by the world’s top road riders on the UCI WorldTour. SST™ is the result of years of R & D studying airflow in wind tunnel alongside the development of new production methods to bring theoretical ideas to real world riding. Strategically positioned 3D chevrons positively affect airflow around the body reducing drag at the speeds relevant to the target rider. Encapsulator PocketInitially banned then accepted by the UCI the Encapsulator pocket has had a short but controversial life. The super fine translucent mesh allows race numbers to be clearly visible while retaining the breathability of the pocket area around the number. Providing a simple solution to the challenge of neatly attaching a race number the Encapsulator pocket also protects the delicate fabrics from the damage caused by pins. 1000 Series (Aero) Seat PadThe 1000 series Italian stretch pad features is sculpted from a single block of foam so unlike traditional layered pads there are no clunky steps in pad thickness. The BioCeramic® high stretch fast wicking face fabric incorporates a permanent antibacterial finish completing one of the most advanced pads in existence. The “Aero” version of the pad used in the D2Z® Encapsulator Suit™ is specially shaped to suit a more aggressive riding position. Multi Fabric ConstructionEndura’s vast experience of garment construction and rigorous pursuit of “faster” fabrics comes together in the D2Z® apparel collection. The D2Z® Encapsulator Suit™ deploys 5 different fabrics in combination to meet the demands of fit comfort durability and aerodynamic efficiency. 90 Day Satisfaction GuaranteeSo confident are we in this product that if you are not entirely satisfied with it we offer a no-quibble refund or replacement within 90 days of purchase. Optimised for TT position speed range; 46 to 58kph This product has been #BannedByTheUCI Multi fabric construction with Surface Silicone Topography (SST™) sleeve and flank panels for aero optimisation Encapsulator race number pocket and leg gel pocket Raw edge hems with super fine silicone grippers 1000 Series Aero Pad with computer cut “Continuously Variable Profile” (CVP) Hand-sewn in Scotland Construction Nylon 70% Polyester 20% Elastane 10% Fabrics & Technologies
Riding in wet weather is a whole lot of fun, with slippery trails really testing your skills. And with the completely waterproof MT500 Waterproof Onesie II you can stay out for longer, enjoying mountain biking in the very worst of weather. It’s made possible by way of the fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction. While it keeps lashing rain out, the exceptional breathability also ensures you’re not left damp and sweaty inside. If you need some cool airflow simply unzip the underarm vents and enjoy the cool breeze. You can even zip off the lower legs if the sun begins to peek through the clouds. For durability, Endura have used extra-tough panels across the seating area, and this durable nature extends to the shoulders too, with silicone added to grip backpack straps. Ergonomically positioned stretch panels in the legs make pedalling easy. And this complements the overall relaxed fit, allowing you to move and manoeuvre easily as grip levels change constantly.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.