This kid's dropper seat post features a 27.2" diameter as well as 70mm of travel, so your little rider can get the same performance as you would normally expect on an adult's bike. Brand-X has also designed this kid's specific model to drop under a lower weight load, so they can enjoy the identical benefits of a dropper seat, while out on the trail. Ideally suited for riders aged six to twelve years old, this seatpost will drop under a 20kg load and Brand-X suggests a max load of 40kg. It is internally cable routed and comes with a 1x shifter for left-hand bar mount. This allows it to deliver the same reliability and peace of mind that comes as standard with all Brand-X dropper posts. The minimum insertion length is 80mm (including the actuator – this is 114mm of post). The total post length is 315mm. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Recommended assembly grease for use on the Brand-X Ascend dropper posts. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.
Available in both internally and externally routed options, this seat post actuator cover is perfect for helping you repair and maintain your Brand-X Ascend dropper seat post. The external option is a replacement actuator cover for Brand-X Ascend II External Route droppers. The internal option is an actuator cover/boot for Brand-X Ascend Internal Route droppers.
Available in both internally and externally routed options, this replacement cartridge is perfect for helping you repair and maintain your Brand-X Ascend dropper seat post. Each cartridge is unique to each travel option and cartridges are not cross-compatible, so it is important to ensure that you marry up the correct cartridge to the routing and the travel of your Brand-X Ascend post. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.
The Brand-X EH1 Enduro Helmet has been designed and developed by riders wanting to maximise comfort, style and safety. The in-mould construction in combination with our lightweight shell and EPS inner has allowed us to save weight and add ventilation where you need it most, maximising comfort on any ride. The low rear profiling provides additional rear protection and the low-slung retention system grips the helmet firmly to your head and is fully adjustable to guarantee the perfect fit. The visor is height adjustable and is loosened off and moved with a bolt either side. Sealed anti-bacterial padding that is both removable and washable provides additional comfort and keeps things clean for future rides.
Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right hand mount 'paddle' lever is available here: https://www.wiggle.co.uk/brand-x-ascend-lever-kit The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 489mm 170mm 100 138 30.9mm x 489mm 170mm 100 138 Service Guide Information Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.
The Brand-X Classic Bar End is 3D forged from one-piece of 6061-T6 Aluminium and features a gentle curve for a comfortable riding position. They can be set at any angle and will fit securely on all handlebars.
Building on the success of the Ascend 01, Brand-X now offer a shorter drop 27.2mm diameter option. The 27.2mm diameter makes it an ideal option for CX, Gravel or Road riders who want to feel the benefit of a dropper. The post carries over the reliability and core qualities of the Ascend 01. Infinitely smooth adjustment and incredible value for money makes the Ascend CX the go to option for cylcocross riders. The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. The ergonomic paddle style remote lever is designed to be on either left or right hand side of your bars. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 350mm 85mm 100 134 27.2mm x 400mm 105mm 120 154
The kit includes paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. Once fitted, it offers you effortless control of your Brand-X dropper post. Please note: This lever is designed for use on drop handlebar bikes, (cyclocross and gravel bikes), and will not fit on the lever clamp area of an MTB handlebar.
Shifter Style - 1x Gears The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit and actuates from beneath the handlebar meaning that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur. Paddle Style - 2x/3x Gears The compact paddle style remote lever is designed to sit next to your front shifter and actuates from the top of the handlebar, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.
The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Now available in both a 125mm and 150mm travel options, it allows riders to infinitely adjust their saddle height to suit the terrain ahead. Ergonomic Shifter-Style Dropper Remote The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that this dropper is ideally suited for those using a 1x chainring set up; without a front derailleur. However, a paddle style shifter is available separately for those who want to use the Ascend with a front derailleur and shifter. For installation, the seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. Please Note: This Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated - for externally routed bikes, please see the Ascend II 105/125mm/150mm travel version). Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.