KEEP THE COLD OUT AND THE WARMTH IN WITH THIS VERSATILE AND COSY SNOOD. FEATURES High wicking merino blend fabric Reflective detailing Multi-functional 19% Merino / 3% Elastane / 10% wool / 67% Polyester
Giant SpeedShield ATB Fender feature a unique softer PP material construction to prevent cracking in extreme temperatures with UV resistance for improved durability and a proprietary bracket design for a stable fit. FEATURES Unique softer PP material helps prevent cracks in extreme temperatures UV resistance for increased durability Proprietary bracket design helps keep fender stable on the bike Adjustable angle
Fast wicking lightweight fabricTriple rear pocket systemShort front zipFull sublimation print for fresh look
Clip-in lens holder for Shark glasses
Designed for use with the common 31.8mm bar thickness, you can install the Enduro stem in two ways. Run it in its standard upright position for a more relaxed ride, or flip it over and run it the other way for a more aggressive position. This lower option makes it ideal for use with modern MTB’s larger 27.5” or 29” wheels.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Single Bike Kits contain enough end caps to easily hop-up the housing on one bicycle.
The Brand-X Classic Bar End is 3D forged from one-piece of 6061-T6 Aluminium and features a gentle curve for a comfortable riding position. They can be set at any angle and will fit securely on all handlebars.
This set includes two front QR end caps for use on the Brand-X Trail front wheel. Genuine Brand-X spare parts. Fitment Instructions: Pull off old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike. Manufacturer's Part Number: BXTWFQREC Black Option 1 Pair
Available in both internally and externally routed options, this seat post maintenance kit is ideal for helping you repair and maintain your Brand-X Ascend dropper seat post. Internally routed options include OE replacement seals, bushing and brass keys. (no outer cable included) Externally routed options include OE replacement seals, bushing, brass keys and nylon outer cable and barrel. Each maintenance kit is unique to each travel option and is not cross-compatible. Please ensure that you marry up the correct kit to the routing and the travel of your Brand-X Ascend post. *Please double check your own dropper post prior to purchasing the kit. The internal route Ascend posts updated in 2020 and the maintenance kit sold here is specifically for those posts. Older model maintenance kits will be added to the site in due course. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.
This set includes two rear QR end caps for use on the Brand-X Trail rear wheel. Genuine Brand-X spare parts. Fitment Instructions: Pull off old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike. Manufacturer's Part Number: BXTWRQREC Black Option 1 Pair
This end cap set includes two front 12mm end caps for use on the Brand-X Trail front wheel. Ideal for replacing your worn out existing end caps or for giving your front wheel a refresh. Genuine Brand-X spare parts. Fitment Instructions: Pull off the old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike. Manufacturer's Part Number: BRNDTRAIL12MMCAP Black 12mm - Pair