The Eclat Pizza Place sweater is made of 50% cotton, 50% polyester and is embroidered with an Eclat logo on the front.
The Eclat Techno sweater is made of 50% cotton, 50% polyester and is embroidered with an Eclat logo on the front.
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less dragA captured compression ring sets the bearing preload and stays true no matter how you ride (no rocking or creaking)Premium split-lip sealed stainless steel bearings give double the protection while decreasing frictionCompatible with Interlock spacersHand polished and anodised.
Pullover hoodie from Fast & Loose with kangaroo pouch and logo on chest.
Medium weight hooded top from Federal with embroidered logo on the chest.
Brake lever assembly opener HS33Re, 4-finger black aluminium lever blade with ball-end, HIGO-Opener, NC, 150 mm hose length, (1 pc)
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.