Our Carbaura RC wheelsets have been designed to keep you one step ahead of the competition.Built around an optimized, Computational Fluid Dynamics tested, aerodynamic profile in a Carbon Fibre chassis, low weights, linear compliance and lateral stiffness were our primary aims with the Carbaura RC wheelsets.The tried and tested 19mm internal and 25mm external rim widths allow you to run a choice of traditional or tubeless tyres and are well suited to tyres ranging from 25c through to 35c widths to deliver enhanced comfort and grip.To improve braking performance and rim durability on tough alpine descents, the braking surface has been finished in a 1.5k weave to dissipate heat throughout the carbon structure faster to dramatically reduce temperature build up.Hand crafted with lightweight bladed aero spokes to decrease resistance and widely spaced hub flanges the Carbaura RC wheelsets have been built to reduce any possible lateral flex and increase power transfer. The rear wheels uses a 16/8e lacing pattern to balance spoke tensions and withstand torque forces from centre of the wheel whilst the front wheel uses radical lacing to reduce weight and drag.Our RS Front and RS 6Drive hubs use fully sealed EZO bearings for year round longevity. The RS 6Drive hub uses 6 individually sprung reversed pawls, mounted into the hub shell, that simultaneously engage into the 30-point freehub driver for positive torque transfer.Available in two depths, 35mm, a lower inertia option great for undulating courses, and 50mm, a more aerodynamic option for flatter routes.Included FittingsFront: 100 x 9mm QR,Rear: 130 x 9mm QR.SpecificationsSpokes: Halo Black Aero Racing Stainless spokes ,Nipples: Halo Red Alloy nipples ,Rim Depth: 30 or 50mm,Internal Width: 19mm,External Width: 25mm,Front Hub Spacing: 100mm,Rear spacing: 130mm,Drillings: 20H Front, 24H Rear,Freehub: Shimano HG and Campagnolo versions,Drive System: 6Drive,Freehub Body: Alloy,Spoke pattern: Radial Front, 16/8e Rear,Recommended Tyre size: 25-35c,Colour: Raw UD/1.5k Carbon.
The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.
Performance Upgrade Made EasyThe C38 brings carbon fiber high performance to the real world. It’s a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires providing the right amount of sidewall support to facilitate surefooted handling in all conditions the C38 wheelset is a great handling lively climbing robust all-road performer that also aerodynamically outperforms many deeper aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar. Spoke Pattern: 24-Hole Radial Driveside / Two-cross (1:1) Non Driveside Front and 24-Hole Two-cross (1:1) Rear Nipple Type: DT Swiss Prolock Brass Hub: DT Swiss 370 Classic Centerlock 18t Ratchet System LN 100x12mm & 142x12mm thru-axle compatible Assembly Method: Hand-built Extras: Tubeless Rim Tape and Valves Lifetime warranty System Weight Limit: 240lbs / 109kg Rim: Rapide C 38mm Depth
The Elusion Carbon RR Disc is the supreme choice for all round road cycling performance. Equipped with disc brakes, this wheel set offers confidence-inspiring, responsive stopping control. A stiff, 42mm rim depth, ensures a light weight construction for improved efficiency. The tubeless ready, 17C rim delivers reactive handling and acceleration to keep you ahead of the pack in any conditions. Vittoria's SwitchIT® hub design ensures a perfectly balanced spoke tension, making your wheels acutely responsive to your demands. 42mm rim depth Centerlock disc mount
Token Konax Pro All-Road Wheelset (52mm)The Konax Pro All-Road is the ideal wheelset for any road cyclist looking for a high-quality and performance-ready option for their bike. Made from a sturdy lightweight carbon construction and boasting a 52mm rim profile, this set offers race-ready speed and agility so you're ready for whatever you meet on the tarmac.Fast-Rolling, Carbon-Made Road Disc WheelsetThe 20mm width keeps them well-balanced and nimble without impacting the overall strength, making these Token models the ideal pick for both distance and sprint riding. Bolstered by Sapim CX-RAY spokes, both wheels maintain their structural integrity under high road pressures and impacts and spin smoothly and strongly upon D1 hubs. The rear hub comes with a Shimano 10/11-speed freehub to give that extra thrust when you need it most.With a tubeless-ready profile providing added protection and control when using lower inflation tyres, the Token Prime Konax Pro 52mm Disc All-Road Wheelset is an ideal choice for the rampant road rider.Features: Rim Material: Carbon Fibre Rim Dimensions: Internal Rim Width: 20mm; External Rim Width: 27.4mm; Rim Height: 52mm Spokes: Front: 18x Sapim CX-RAY Straight, radial lacing; Rear: 21x Sapim CX-RAY Straight, diametric lacing Hub Type: D1 with Premium bearings Compatibility: Shimano 10/11-Speed Compatible Tyre Size: 700x25c - 700x28c Tubeless Ready: Yes Weight: 1452g (combined) Weight Limit: 100kgBuy Token Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Measuring a 52mm height, each of these fast-rolling road wheels gives brilliant balance and crosswind stability as you embark on the speediest rides possible. The 20mm internal width aids with stability while the carbon fibre construction ensures a rigid and responsive performance, ride after ride. Fast-Rolling, Carbon-Made Road Wheelset The front wheel is bolstered by 24 Sapim CX-RAY Straight spokes, with the rear roller housing 24 of the same spokes, helping to maintain the shape and structural integrity of the set at high speeds. The Z1 hubs ensure a smooth and reliable rotation, putting their Premium bearings to great use, with the back model housing a Shimano-compatible freehub for top-end power transfer as you hunt for the podium. Tubeless-ready for improved cornering grip with lower inflation tyres, this rapid set of Token wheels is formidable pairing for the fast-paced road racer.
The all new TR 309/289 XC wheelset is designed to push the limits of aggressive XC/Trail racing and riding. Thanks to a new low profile and wide channel rim riders will notice increased cornering speed, direct power transfer and improved compliance. The Reynolds TR MTN hubs provide 10° of engagement for quick power delivery. The TSS/PRR3 rim construction delivers industry leading impact resistance and durability with a lifetime warranty. The 309/289 XC features a 30mm internal width front rim paired to a 28mm internal width rear. Wider rims allow you to run lower pressure, increase traction and add precision to your steering. Reducing the rims profile to 21mm for improved overall compliance and comfort. With most of the rider weight and power on the bike being transferred to the rear, a 28mm wide rim paired to 28 spokes creates an ideal balance between strength, comfort and performance. On the front, the rim has been widened to 30mm to add even more steering precision and sidewall stiffness where it matters most. To maintain a similar feel to the rear, the spoke count has been decreased to 24 to add compliance and reduce weight for a more flickable feel while navigating the tight and twisty sections of the trail. PR3 used in Reynolds Allroads, TR S and TR mountain wheels takes this same approach balancing structural requirements with performance and value. In these rims, the overall rim profile, rim bead and brake track areas are called out with unique fibre and resin schedules. Features: Outer Rim Width: Front - 35.5mm | Rear - 33.5mm. Inner Rim Width: Front - 30mm | Rear - 28mm. Rim Depth: 21mm. Rim Material: Carbon Fibre. Rim Construction: Hookless tyre bead, tubeless-ready, TSS PR3 Construction Technology. Rim Size: 29”. Hub: Reynolds TR MTN. Spoke Type: Sapim Sprint. Nipple: External Brass. Engagement: 10°. Spoke Count: 24 Front, 28 Rear. Brake Interface: Disc Only, Centrelock. Freehub: Shimano HG, Shimano Micro Spline, or SRAM XD. Wheelset Weight: 1665g (set), 751g (front), 922g (rear).
Reynolds Enduro Carbon Boost MTB WheelsetThis high-quality wheelset is specifically developed for the demands of enduro racing and its 'kitted out with a dependable build for tackling the most rigorous of terrain conditions. It features two asymmetric carbon fibre rims, which provide fantastic strength through more even spoke tension. Another benefit of its carbon fibre rim construction is it allows riders to enjoy increased stiffness and durability when climbing, without any unnecessary weight holding them back when roaring down the trail.Tubeless-Ready with Hookless Rim ProfileReady for racing, this mountain bike (MTB) wheelset is equipped with a tubeless-ready, hookless rim profile for a no-burp tyre fit and easy inflation. Thanks to its tubeless-ready technology, riders will also enjoy tubeless benefits such as lower rolling resistance, improved traction and fewer chances of flats or punctures.Carbon Fibre Wheelset with Industry Nine HubsBlack Label Mountain wheels combine Reynolds' asymmetric, hookless MR5 carbon fibre rims and Reynolds designed precision mountain hubs by Industry Nine to set the bar in mountain bike wheel performance. The rim design features a perfect balance of width, depth, and layup for wheels that provide ultimate durability, riding comfort, and trail hugging traction like you've never experienced before.- Asymmetric rim profile provides a stronger wheel through more even spoke tension- Tubeless-ready, hookless rim profile for a no-burp tyre fit and ease of inflation- Precision manufactured Reynolds hubs by Industry Nine that offer ultra-quick, 3 degrees of engagement and durability you can trust- Sapim CX-Ray spokes provide the ultimate combination of vertical strength and lateral compliance on Black Label enduro, trail and plus models- Lifetime warrantyFeatures: Rim Material: Asymmetric, hookless Carbon Fibre Axle Size: Front: 15x110mm; Rear: 12x148mm, Boost Use: MTB, Enduro Rim Width: Inner: 28mm; Outer: 34mm Rim Depth: 29mm Freehub Type: Shimano Tubeless Ready: Yes, tubeless-ready, hookless rim profile Spoke Type: Sapim CX-Ray Spoke Count: Front: 28; Rear: 28 Spoke Pattern: Front: 3x; Rear: 3x Hub: Industry Nine; Rear: Industry Nine Nipple: External Alloy Engagement: 3° Pawl: 6 Brake Compatibility: Centre Lock disc brake Decal: Black water slide Included: 2x45mm Tubeless Valve Stems, End Caps (15mm FT/12x142mm RR installed), 30mm Tubeless Tape installed and Reynolds Owner's Manual Wheel Size: 27.5" Single or Pair: Pair Weight: 1660g (pair)Manufacturer's Part Number: R-WC-77516 Black 27.5" ShimanoBuy Reynolds Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Taking the notion of combining flagship performance with workhorse dependability one step further, we’re introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement should the need arise, and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL – 33mm deep with a 25mm internal width – but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back.Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible,Rim Details:32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm,Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs) , 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ),Bearing Type: DT Swiss Sealed Steel Cartridge Bearings,Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm,Nipple: DT Swiss Hex Prolock Al 2.0x14mm,Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi,Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve),Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built.,Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs / 125kg.
The gravel grand-masters! At only 1389 grams the DT Swiss CRC 1400 Spline wheels are the perfect choice for any rider who is looking for a lightweight wheelset that can be used on and off-road.24mm deep carbon tubeless ready rimPerfect for high volume 35-45c tyresDT aero comp and aerolite straight pull spokesHub type: 240Weight: 622g (front), 767g (rear)DT have achieved stunning weight figures yet maintained all the strength expected of a wheel that will encounter demanding riding. The full carbon tubeless ready rim, laced to a straight pull 240s based hub, combines maximum reliability for the harsh off-road use with superb performance. The rims are manufactured using a method developed by DT to ensure continuous carbon fibres are aligned with the forces passing through the wheel, increasing strength and stiffness in use without adding weight. The 22 mm internal width is perfect for high volume 35-45 c tyres, giving plenty of support for low pressures and maximising comfort and grip.DT's SPLINE series 240 ratchet hubs have long been a byword for reliability and low weight, with optimum spoke placement to allow improved bracing angles, improving lateral stiffness for no additional weight, a fast-engaging 36-tooth ratchet completes a premium package. DT's straight pull Aerolite and Aerocomp spokes offer a highly optimised mix of low weight, stiffness and aerodynamic performance with DT's renowned reliability.The front wheel comes ready for 12 x 100 mm thru axles with adaptors for 15 x 100 mm, the rear comes ready for 12 x 142 mm thru axles, both come with Q/R converters. Comes with a standard Shimano 11-speed Road freehub but can be converted to Campagnolo, Sram XD or XDR standard.
As part of the DT Swiss gravel range, the GRC 1400 Spline wheels have been designed to be the ultimate any-road gravel wheelset. The carbon rims are a massive 24 mm wide internally, perfect for big volume gravel tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Incredibly smooth and durable DT Swiss 240 hubsSuitable for 12mm thru-axlesLightweight starting from 717g (27.5 inch - front)Wide 24mm ID carbon tubeless ready rim supports wider gravel tyresThe GRC 1400 Spline wheels are equipped with a super light but tough 42mm high, 24mm wide ID, carbon tubeless ready rims and DT Swiss spokes. The combination of Aero Comp and super strong New Aero spokes are happy transferring the torque from even the beefiest of calves. DT's 240 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 240 36-tooth ratchet system is the most reliable out there, it can also be serviced without the need for specialist tools, making it ideal for back country epics. If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the GRC 1400's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
The new Shamal Ultra from Campagnolo embodies the incredible quality that has made the Shamal the go to aluminium race wheel for almost two decades. Offering further improvements in terms of versatility and performance, and meeting the C17 standard, the Shamal Ultra is perfect for use with 25/28mm tire sizes. Thanks to the Dynamic Balance technology, every point of the rim is counter-balanced by an equal weight on the opposing side, providing maximum stability even at high speeds. The addition of MoMag technology creates a rim profile that is free of holes, making rim tape unnecessary, and the differentiated rim height keeps the spokes in the position of maximum aerodynamic penetration. The toroidal milling reduces the peripheral weight of the rim, making the wheel extremely reactive, the 2-Way Fit profile enables the use of either classic clincher or tubeless tires whilst the Ultra-Fit design allows for easy tire mounting, maximum safety, minimum friction, less energy dispersion and improved performance. The spokes have been designed with an aerodynamic profile to achieve maximum aerodynamic penetration, reducing sag and saving rider energy, whilst the self-locking system ensures that the spokes maintain the optimum aerodynamic position. The spokes are lightweight aluminium with an aero design, and use the exclusive MEGA G3 spoke pattern which creates the perfect balance of spoke tensions on both sides of the wheel, reducing stress, increasing transversal rigidity and improving the transmission of power to the wheel. The hub features a carbon fibre body for a high degree of lateral stiffness with minimum weight, an aluminium axel for low weight and high stiffness and Usb ceramic ball bearings which reduce friction, provide greater smoothness and maintains performance over time. The hubs have been designed with a differentiated hub diameter front and rear, optimised for structural integrity and aerodynamic efficiency. Dynamic Balance Toroidal Milling2-Way Fit ProfileUltra-Fit Momag Differentiated Rim Height Self-Locking NipplesAero Spokes in AluminiumExclusive Mega-G3 Spoke PatternUsb Ceramic Ball BearingsCarbon Fibre Hub BodyAluminium Axle Oversized FlangeDifferentiated Hub Diameter Front and RearWeight: Front 815g, Rear 935g