The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
The most Extravagant Wheel options we could create are now available as an instant custom! This wheel consists of a Profile Elite Male rear hub with Optional Titanium axle upgrade & Titanium Driver upgrade. Laced onto a G-Sport Ribcage rim using Rainbow Titanium Source BMX spokes with Brass nipples. The Titanium Driver/Axle options will need to be Added to your basket as this will affect your total price. The Weight saving on this wheel when using all of the Titanium spokes & hub upgrades works out roughly 200grams / 7.05oz lighter than standard chromoly. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Elite Cassette Hub AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:G-Sport Ribcage Rim SPOKES:Titanium Raindow NIPPLES:Brass WEIGHT:1112g / 39oz
Hand built right here at Sourcebmx. One of the highest spec custom wheels we offer this wheel uses the Profile tried and tested Elite Cassette hub laced into the super strong Cinema 888 rim. This wheel is laced together using high quality straight gauge stainless spokes. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Elite Cassette AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:Cinema 888 SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1278g / 2.81lbs
The most Extravagant Wheel options we could create are now available as an instant custom! This wheel consists of a Profile Elite Male rear hub with Optional Titanium axle upgrade & Titanium Driver upgrade. Laced onto a Cinema 888 rim using Titanium Source BMX spokes with Brass nipples. The Titanium Driver/Axle options will need to be Added to your basket as this will affect your total price. The Weight saving on this wheel when using all of the Titanium spokes & hub upgrades works out roughly 200grams / 7.05oz lighter than standard chromoly."Hand built right here at Sourcebmx. This custom rear BMX wheel uses the tried and tested Profile Mini cassette hub in polished laced into a BSD NASA rim using high quality double butted rainbow spokes. NOTE: Please confirm the size of your driver at Checkout. Titanium driver and axle upgrades also available at checkout.###section### Product Specs WHEEL SIZE: 20" HUB: Profile Elite Cassette AXLE: 14mm Male DRIVE SIDE: Right Side Drive RIM: Cinema 888 SPOKES: Titanium NIPPLES: Brass WEIGHT: 1202g / 2.64lbs
The most Extravagant Wheel options we could create are now available as an instant custom! This wheel consists of a Profile Elite Male rear hub with Optional Titanium axle upgrade & Titanium Driver upgrade. Laced onto a G-Sport Ribcage rim using Rainbow Titanium Source BMX spokes with Brass nipples. The Titanium Driver/Axle options will need to be Added to your basket as this will affect your total price. The Weight saving on this wheel when using all of the Titanium spokes & hub upgrades works out roughly 200grams / 7.05oz lighter than standard chromoly. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Elite Cassette Hub AXLE:14mm Male DRIVE SIDE:Left Side Drive RIM:G-Sport Ribcage Rim SPOKES:Titanium Raindow NIPPLES:Brass WEIGHT:1112g / 39oz
The most Extravagant Wheel options we could create are now available as an instant custom! This wheel consists of a Profile Elite Male rear hub with Optional Titanium axle upgrade & Titanium Driver upgrade. Laced onto a Cinema 888 rim using Titanium Source BMX spokes with Brass nipples. The Titanium Driver/Axle options will need to be Added to your basket as this will affect your total price. The Weight saving on this wheel when using all of the Titanium spokes & hub upgrades works out roughly 200grams / 7.05oz lighter than standard chromoly."Hand built right here at Sourcebmx. This custom rear BMX wheel uses the tried and tested Profile Mini cassette hub in polished laced into a BSD NASA rim using high quality double butted rainbow spokes. NOTE: Please confirm the size of your driver at Checkout. Titanium driver and axle upgrades also available at checkout.###section### Product Specs WHEEL SIZE: 20" HUB: Profile Elite Cassette AXLE: 14mm Male DRIVE SIDE: Left Side Drive RIM: Cinema 888 SPOKES: Titanium NIPPLES: Brass WEIGHT: 1202g / 2.64lbs
Hand built right here at Sourcebmx. One of the highest spec custom wheels we offer this wheel uses the Profile tried and tested Elite Cassette hub laced into the super strong Cinema 888 rim. This wheel is laced together using high quality straight gauge stainless spokes. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Elite Cassette AXLE:14mm Male DRIVE SIDE:Left Side Drive RIM:Cinema 888 SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1278g / 2.81lbs
Conversion kit includes 2 bolts of your choice with 2 chromoly washers, 2 cone spacers with anti slip steel washers, and 1 chromoly axle.
CNC machined from aircraft quality billet 7075 aluminum plate. Chainring has offset centerline and is reversible so you can dial in your chainline.
Elite Cogs are CNC machined from heat-treated 4340 aircraft alloy steel for strength and durability.
The Elite is the stiffest crank set Profile has ever made! Made for for todays modern BMX racing, Oversized and gusseted, the Elite arms are constructed of heat treated 4130 Chromoly. The Elite crankset includes left & right crank arms, 22mm GDH Titanium axle, 4-bolt spline drive spider & outboard Euro bottom bracket and Black 8mm GDH aluminum axle bolts. Hand Made in St. Petersburg, Florida, USA. Limited Lifetime warranty to the orginal purchaser. ###section### Product Specs Crank Type:3pc Spindle Diameter:22mm Includes BB:Yes Weight:798g / 29.9oz ###shogun-image-section###