This ingenious magnetic bowl is perfect for when the workshop gets messy and you end up losing those vital small parts.6 Stainless steel tray with rubber-coated magnets in the baseKeeps all your nut, bolts...etc where you left them
The Tyre Fitting tool is designed to help you easily lever a stubborn tyre onto the rim without puncturing your inner tube. It will save time, frustration and your fingers!
This Pro Fork Mount Workstand from Lifeline securely mounts your bike and enables you to rotate it and work from multiple angles. Plus, its adjustable height and rotating platform give you easy access to all areas of the bike to make every maintenance task easier and more convenient.360-degree Rotating PlatformPlanted tripod design for stabilityMulti Axle compatibility with axle suppliedQR lockoutsStainless Steel tubingCollapses for easy storageFolded: 94 x 20 x 14cmAssembled: Platform length 87cm, Maximum height 119cm (floor to platform), Floorspace (leg to leg) 100cm, Leg length: 67cmWeight: 5.6kgThis workstand mounts to your bikes fork dropouts to hold your ride upright and stable. It features a multi-axle compatible adjustable sliding jaw-mount to ensure you have a secure mount that s easy to move as required. With a 360-degrees rotating platform, this workstand enables you to position your bike to whatever position makes your task the easiest. It features a rigid and stable tripod design that s equipped with balancing cup-feet to ensure your pride and joy stays upright. And, this robust stand conveniently folds down for easy storage when not in use.
A long-lasting and reliable front bike light for the daily and distance rider, this powerful lamp by LifeLine uses a three-LED setup to keep you illuminated and seen from as many angles as possible. The central LED has a maximum 1000-lumen output while the two side LEDs feature 350 lumens each. The full combined power emits a brilliant 1700-lumen brightness with a 1 hour and 40-minute burn time.Light Modes: Central Beam Functions - Full Beam (1000 lumens), Medium (500 lumens), Low (200 Lumens) and StrobeSide Beam Functions - Full Beam (700 lumens), Medium (350 lumens) and Flashing (200 lumens)Light Types: 1x Cree XM-L2 1000 Lumen Central LED; 2x Cree XP-G3 350 Lumen Side LEDsBattery Level Indicator: 4 LEDs illuminated (+90% battery power remaining), 3 LEDs (70-90%), 2 LEDs (40-70%), 1 LED (10-40%), 1 LED Flashing (-10%)Charge Time: 5 HoursBurn Times: 1700 Lumens (1hr 40 mins), 850 Lumens (3hrs 20 mins), 400 Lumens (flashing) (7 hrs)Charging: Included USB Micro USB Charging Cable and PlugMounting: 31.8mm alloy handlebar mountWeight: 263g (including mount)Please Note: LifeLine are in the process of a rolling change on the mounts and changing the mount to a 31.8mm/ 35mm multi compatible mount that does not include the rubber shim.The side lights can be operated separately from the front light, using a button on the top of the unit, with the battery-level indicator situated nearby. The trio of LEDs also have a range of functions to suit the riding conditions and levels of visibility. With an integrated USB power bank letting you charge your cycle computer or mobile phone on the move, this is a versatile light to stay visible on every ride.
The LifeLine Superlight PU Shock-Absorbing Bar Tape has a premium matt velvety texture, which gives you a secure grip. It also provides excellent long distance comfort due to its 2mm thick profile and gel component, which help to cushion the impacts when riding on uneven surfaces. Easy to stretch and with a self-adhesive backing this bar tapes gives you a nice tight wrap and simplifies fitting.Durable, tear resistant PU CompoundGrippy matte velvety texturePerforations with subtle red contrast base2mm profile for a light cushioning effectShock absorbing gel component for increased comfort on endurance road ridesAn element of stretch and an adhesive backing strip for a tight, secure wrap2 small finishing strips includedIncludes LifeLine end plugs
The LifeLine Digital Pressure Gauge provides exceptional accuracy and hassle-free performance. Enabling to you achieve the perfect pressure rating for your tyres, it not only can give you an accurate pressure reading within 3 seconds but is compatible with Presta and Schrader valves while also featuring a 'Bleed Valve' enabling you to fine-tune the inflation.Max Pressure: 160 psiValve Type: Presta & SchraderPressure Adjustment: Bleed ValveInflation Units: PSI, BAR, KPA, KG CM2Display: LCD BacklitPower Saving: Auto Power-OffTo increase accuracy and functionality even further it features both 'Calculation Mode' enabling you to measure the inflation of the tyre and 'Adjustment Mode', which allows accurate pressure measurement as you use the bleed valve to achieve the perfect inflation value.
Set the correct gap for any hydraulic brake caliper with the Lifeline Pro Disc Brake Caliper Alignment Tool. Easy to use and prevents brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor.Follow the simple steps below:Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side.Insert the Caliper Alignment Tool between the pads and the rotor.Pull the brake lever- forcing the pads against the alignment tool and in turn against the rotorWhile still holding on to the brake lever, tighten the bolts on the brake caliper.Release the brake lever and remove the tool and your pads should now be cantered to the rotor with an equal distance either side.Weight: 33gSize: 15cm x 3.5cmBlade length: 13cm
LifeLine's Narrow Road Clip-On Mudguard is a flexible and lightweight clip-on mudguard made from PET/aluminium. It is quick and very simple to install, and all the mounting hardware is included. This mudguard is UV and corrosion resistant and is compatible with all caliper and disc brakes.Material: PET/AluminiumLightweight & flexibleUV and corrosion resistantQuick and easy to installAll mounting hardware includedCompatible with caliper and disc brakes
The Brand-X Turbo Trainer QR Skewer is specially designed to work with the TT-01 magnetic turbo trainer. Can also be used in place of your standard QR skewer.
The LifeLine training mat protects your surfaces from sweat and debris from your bike, helping you train year-round without upsetting your household.Dimensions 900 x 2080mmDurable and waterproof Polyethylene plastic materialEasy to storeTraining indoors is important for maintaining form and building your mileage through the winter ready for the season ahead, but reduced airflow and sustained efforts cause you to sweat as your training intensifies. The 900 x 1800mm footprint offers ample coverage for your training setup, wipes clean easily and convenient rolls-up easily for storage.
The Lifeline Sweat Net is here to protect your bike from corrosive sweat whilst you train hard. Train hard indoors Save your bike from the dangers of corrosion with the Lifeline Sweat Net. The Sweat Net is perfect for any home bike trainer setup. Easy fitting and removal for training and regular riding.
For fast, compact delivery for inflation on the go, the LifeLine CNC inflation is an essential part of your bike ride. The CNC inflator controls tyre inflation securely, making it an everyday part of your bike ride.To use, simply thread a cartridge into the mount, thread the head onto the valve and turn the pressure dial to begin the inflation. This dial can be closed again at any time to retain pressure for later inflation's. Ensure the lock ring on the inner tube is tightened securely against the rim before inflating as this will prevent the valve from moving into the rim when pressure is applied.Thread on valve head for secure, controlled CO2 deliveryInflator dial for pressure controlCompatible with threaded CO2 cartridgesFits both Presta and Schrader valvesFast, convenient tyre inflationPrecision CNC Alloy body