The LifeLine training mat protects your surfaces from sweat and debris from your bike, helping you train year-round without upsetting your household.Dimensions 900 x 2080mmDurable and waterproof Polyethylene plastic materialEasy to storeTraining indoors is important for maintaining form and building your mileage through the winter ready for the season ahead, but reduced airflow and sustained efforts cause you to sweat as your training intensifies. The 900 x 1800mm footprint offers ample coverage for your training setup, wipes clean easily and convenient rolls-up easily for storage.
The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
The LifeLine 18 in 1 Multi-Tool with Co2 Inflator features the following tools: - Chain Tool with Retaining Hooks to secure the chain as you split or repair it - Press- on Co2 Inflator, compatible with presta and schrader valves - 2/4/5/6/8MM Hex Keys - Phillips and Flat head screwdrivers - Torx T25 and T30 Tools - 10MM Open Wrench - 3.23/ 3.33/ 3.45/ 3.96 Spoke Wrenches - Mavic® compatible Spoke Wrench
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privalege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU Coating and have a fully welded construction. The Adventure Frame Bag mounts to the underside of the top tube and sits at the front of the bike. Its big enough to be useful and yet small enough to allow a 600ml water bottle to retain it's place on your downtube. The bag features a reflective Lifeline graphic and an easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. A cable entry/ exit point at the head of the bag allows for on the go charging. The robust hypalon staps are sized to mimimise 'on the bike' interference, but maximise the bags stability- wide strap mounting to the top tube and narrower strap for the down tube. We packed ours with a pair of overshoes, a rain jacket, some hydration tabs, a compass and a few snacks!
The LifeLine Spanner Set features a heavy duty roll mat which can be fixed in place on a shadow board in a professional or home workshop. The LifeLine Spanner Set is nothing short of essential for any mechanic.
LifeLine Pro Chain Rivet Extractor The LifeLine Pro Chain Rivet Extractor is a must for every home mechanic. Constructed from heavy duty steel with strong rubberised grips, this chain tool is ideal for removing chain pins with complete confidence.Features: Durable steel construction Oversized plastic handles for grip and comfort Comes with one replacement splitting pin Adjustable chain support screw prevents damage to the chain and the tool Suitable for all chains from single-speed to derailleur type (5 - 11 speed) Adjustable locking barrel can be used to prevent pushing the chain right through and out the other side Instructions for proper use: Back off the handle to make room for the chain to be fitted to the tool Back off the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Turn the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool Repeat steps 5 and 6 until the two pins are aligned Now firmly tighten the handle to push the pin out, splitting the chain You can use the locking barrel to prevent pushing the chain pin right out of the other side. This makes it much easier to join a chain and push the pin back in again. (Note that you can only do this on certain types of chain - Check with the manufacturer for details) The only time you would use the front teeth on the tool is to loosen a tight link slightly - If you try to split a chain using them, you will break them off Buy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Spanner Set The LifeLine spanner set is a workshop quality spanner set manufactured from chrome vanadium and comprises of 8 spanners ranging from 8mm to 16mm. The spanners have one open end and one ring end and come complete inside a heavy duty roll mat for safe keeping. Features: Included spanners, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm 8 piece chrome vanadium Buy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Headset Cup Remover An ingenious solution for the removal of headset cups without the need for expensive headset presses. Secure your frame in a bike stand and place the open end inside the head tube and hammer the cups out. A simple yet highly effective method that will save you both time and money. Features: Fits 1.1/8" Only Buy LifeLineProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro 18-In-1 Multi ToolHave versatility at your fingertips with the 18-In-1 Multi-Tool with CO2 Inflator. The perfect all-rounder, this essential piece of kit keeps your ride stress-free and allows for an immediate fix should something go wrong. With maintenance taken care of, focus all of your energy on the path ahead.Features: Chain tool with retaining hooks Press- on CO2 Inflator 18 Essential cycle maintenance/ repair tools Magnetic wrench retainer Chain Tool with Retaining Hooks to secure the chain as you split or repair it Press- on Co2 Inflator, compatible with presta and schrader valves 2/4/5/6/8MM Hex Keys Phillips and Flat head screwdrivers Torx T25 and T30 Tools 10MM Open Wrench 3.23/ 3.33/ 3.45/ 3.96 Spoke Wrenches Mavic compatible Spoke Wrench Weight: 120gBuy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Thru Axle Adaptor (TT-02)The Lifeline TT-02 Thru Axle Adaptors allow you to convert the LifeLine TT-02 Fluid Turbo Trainer to thru axle compatibility.The adaptor kit consists of a replacement axle cup (to fit to the trainer) and a thru axle. Note there are 3 different thread pitches of thru axle available and so please check your current thread pitch. The axles are compatible with 142mm hub spacing only. Unscrew the 'axle cup' from the turbo trainer and replace this with the TT-02 Thru Axle Adaptor. Features: Convert you TT-02 Fluid Turbo Trainer to thru axle compatibility 12 x 142mm hub spacing Compatible with with LifeLine TT-02 Fluid Turbo TrainerBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Oakley Pipeline Trail SS TeeQuick0-wicking and quick-drying, the Oakley Pipeline Trail SS Tee is just the right pick for mountain biking on warmer summer days. Elevate your next trail ride in the Pipeline Trail Tee that features wicking, quick-dry Hydrolix fabric for improved comfort and performance. A mesh back panel provides added moisture management and the back pocket with concealed zipper offers secure storage for your essentials. It’s finished with a high-density print Oakley Factory Pilot logo across the chest a distinctive Oakley B1B logo detail under the back collar.Features:Materials: 100% PolyesterHydrolix fabricEmbossed fabric on front panelHigh-density print Factory Pilot logo across chestHigh-density print B1B logo detail under back collarMesh back panelBack pocket with invisible zipperRegular fitBuy Oakley Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.