LifeLine’s Bluetooth and ANT+ Compatible Heart Rate Monitor can easily be connected to a large range of devices and used with smartphone apps, watches, consoles, and other compatible receivers. The transmitter pod is incredibly lightweight and is integrated within a soft fabric body belt delivering maximum performance and comfort when worn around the chest. The belt can be adjusted to provide a large range of sizes and fit. Tech Specs Heart rate range: 30~230bpm Typical range: 30ft Storage temperature: -10 ~ 60°C Operating temperature: 0 ~ 50°C Average active current: typical 95uA at transmission intervals of 1s Flexible connection interval controlled by Host device (Min:0.3125sec, Max:2sec, default:1sec) Peak Active current: 10.5mA at Tx 0dBm Stand-by current: less than 2uA Battery level display: 100%, 80%, 60%, 40%, 20%, 0% Battery: CR2032 lithium cell (200mAh) Battery life: up to 900hrs use RF system: 2.4Ghz
The LifeLine Essential Mini Torque Wrench allows you to apply a calibrated tension of 5Nm to your component clamps; a common recommendation amount stem, seatpost and groupset manufacturers. This helps prevent excessive clamping which can damage both components and tools.
The tool case is made from a toughened plastic and has a sheet brushed stainless steel outer. Inside the case has a tool tray allowing you to keep your essentials easily accessable. The case weights 1.87KG and has external dimensions of 46cm x 19.5cm x 20.5cm. (note the tools shown in the images are not included with the toolbox)
The Lifeline brake hose kits are replacement kits for hydraulic brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn. There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit: Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper Olive Spec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper Olive Spec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded Olives Spec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper Olives
With a maximum pressure of 160psi, its sturdy steel base improves stability while its steel barrel allows you to pump efficiently. Ideal for use at home or keeping in the boot of your car, it also includes a large and easy to read top-mounted pressure gauge.
The Waterproof Double Bike Cover from LifeLine features a highly waterproof fabric construction with reflective graphics for protection from the elements for two bikes. Plus, it has an elasticated and buckle closure, and it's designed with bike lock holes at the front for a convenient access point to secure your bikes.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
See the compatability chart in the images for specific brake caliper and lever fitment. The kit includes 8 nipple adaptors. Each nipple adaptor is specific to the brake caliper and lever and so please refer to the chart to check the required fitment. Compatatiblity has been checked and confirmed with the following brakes: Avid Code/ XO SRAM Guide Series/ Level Shimano Formula R1, C1,TheOne Hope X2/ E4 & V4 Magura MT Series (2,4,5,6,7,8)/ Louise Hayes El Camino/ Stroker Ryde/ Sole At the moment the kit is not compatible with TRP Quadium, TRP Slate, Formula Cura and Hayes Dominion A2/ A4. Please note: For the newer models of SRAM brakes with a Bleeding Edge port you will also require the LifeLine SRAM Bleeding Edge Brake Bleed Adaptor
LifeLine comfort grips are designed for a supportive and secure feel on any flat-bar bike. A wide textured section on the flats fits the shape of the palm and textured moldings provide grip and padding. The bar-end extensions offer a similar position to the hoods of a drop bar bike and they also add a bit of reach, giving you a slightly more aggressive stance for climbing and accelerating.
Clip on mudguards are the perfect option if your frame or fork does not have mudguard eyelets. They are quick and easy to fit and remove. LifeLine Narrow Road Clip-On Mudguard Set features a PET/Aluminium construction making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware.
Lifeline Prime Armour Road TyreLifeline's Prime Armour Road Tyre delivers a tyre which is packed with essential features like puncture protection, speed, and traction. Including speed-focused properties of LifeLine's Prime Race model with advanced puncture protection features like a Kevlar breaker with full nylon reinforcement, this Prime Armour Road Tyre gives you peace of mind when tackling rough road surfaces.Rolling resistance is kept to a minimum through the use of a slick centre tread whilst the tyre's shoulders benefit from a channelled pattern for enhanced grip in the corners and in wet conditions to disperse surface water from the centre channel. Traction is increased through the use of a 70a durometer compound, allowing you to tackle hairpins with ease.Puncture ProtectionPunctures to the sidewall are extremely frustrating. This Prime Armour Road Tyre protects against this inconvenience by including a nylon reinforcement throughout the entire casing. Overall puncture protection is provided for via a Kevlar breaker; this light yet tough defender lurks quietly beneath the tyre's tread to guard against penetrating road debris.The 120 TPI casing helps reduce this tyre's overall weight to 285g whilst simultaneously increasing strength and flexibility. LifeLine's Prime Armour Road Tyre will tackle a Road Race or Sportive comfortably.Features:Material: 70a Durometer Rubber Compound and Reinforced NylonKevlar breaker for effective puncture protectionFull nylon reinforced casing for complete defensive coverageFast-rolling slick treadChannelled shoulder tread for wet weather cornering tractionDurable70a Durometer rubber compound for added traction and extended lifespanAramid folding bead for easy installationTPI: 120Weight: 285gBuy Lifeline Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.