BMX Handlebars from Eclat. The Dive bars are made from full liquid post heat-treated seamless 4130 crmo. They feature a huge 10" rise. ###section### Product Specs Rise: Multiple Options Width: 30" Up Sweep: 2 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 920g / 2.02lbs ###section### ###shogun-image-section###
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 22.2mm WEIGHT: 367g
The eclat pulse driver was made for their homemade eclat pulse hub. Equipped with sb bearings you are on the right side with this strong driver made by Eclat.
Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Eclat really believe in the simplicity of BMX parts and that’s why they never go over board when it comes to design. The new Dune stem top loader is one of the slickest and most aesthetically designed stems in there collection. It looks incredibly clean thanks to a sunken area for the fork top bolt. Available in a 50mm offset and in three colours, this sturdy unit features a taller 31mm rise and an extra wide clamping area to hold your bars extra tight. ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 31mm CLAMPING DIAMETER: 25.4mm WEIGHT: 354g
The Eclat Radar Zipper Hoodie is made of 50% cotton, 50% polyester with an Eclat logo screen printed on the front and back.
Double walled rim from Eclat. The Bondi straight wall rim features a unique broad design which spreads the impact load of severe landings more thoroughly, meaning you get a longer-lasting rim. It’s lightweight, functional and it’s made with lots of love. Constructed of 6066-T6 alloy and flash welded for strength ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 389mm HEIGHT: 17mm WIDTH: 36mm SPOKE HOLES: 36h WEIGHT: 538g / 18.9oz
The Eclat Unit U-brake is a low-profile designed brake, constructed from 6066 forged alloy, and comes equipped with eclat's brake hardware. The Unit's straightforward design allows for precise fine-tuning.
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 25.4mm WEIGHT: 367g
The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars and stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) and will not be compatible with a traditional 22.2mm stem. Rise: 9.1" ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 4pc Weight: 1130g / 2.49lbs ###section### ###shogun-image-section###
Jordan Godwin signature oversized handlebars from Eclat. The Chocolate bars are made from full liquid post heat-treated seamless 4130 crmo. Available in 9" rise. ###section### Product Specs Rise: Multiple Options Width: 27.75" Up Sweep: 1.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 860g / 1.89lbs ###section### ###shogun-image-section###
Ty Morrow's signature handlebars from Eclat. The Morrow bars are made from full liquid post heat-treated seamless 4130 crmo. They feature a 10" rise. Over sized 1 tube at stem clamping area, must be used with an Oversized stem. ###section### Product Specs Rise: 10" Width: 30.15" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 312g / 0.68lbs ###section### ###shogun-image-section###