Brand-X Ascend XL Dropper Seatpost (170 & 200mm)Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on.Ergonomic Dropper SeatpostThis Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter.Consistent PerformanceThe seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Features: Material: T651-7075 Aluminium Finish: Sand Blasted and Hard Anodised Black Bar mounted paddle style remote lever and cable operated internal routing Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Only compatible with internally routed bikes Diameter: 30.9mm or 31.6mm Travel: 170mm or 200mm Length: 170mm: 499mm; 200mm: 559mm Cable Length: 1.5m 2 Year Warranty Rider Weight: Min: 50-55kg; Max: 120kg Weight: 170mm: 638g; 200mm: 685gMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 499mm 170mm 120 154 30.9mm x 499mm 170mm 120 154 31.6mm x 559mm 200mm 150 184 30.9mm x 559mm 200mm 150 184 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend XL Dropper Seatpost (170 & 200mm)Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on.Ergonomic Dropper SeatpostThis Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter.Consistent PerformanceThe seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Features: Material: T651-7075 Aluminium Finish: Sand Blasted and Hard Anodised Black Bar mounted paddle style remote lever and cable operated internal routing Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Only compatible with internally routed bikes Diameter: 30.9mm or 31.6mm Travel: 170mm or 200mm Length: 170mm: 499mm; 200mm: 559mm Cable Length: 1.5m 2 Year Warranty Rider Weight: Min: 50-55kg; Max: 120kg Weight: 170mm: 638g; 200mm: 685gMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 499mm 170mm 120 154 30.9mm x 499mm 170mm 120 154 31.6mm x 559mm 200mm 150 184 30.9mm x 559mm 200mm 150 184 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tyred CX bike to modern gravel bikes.Increase the capability of your adventure rig with the EA70 AX Dropper postReliable cartridge designCan be paired with drop bar optimized lever or drop bar compatible shifterCable attaches from either direction for compatibility with all dropper leversTwo lengths for better fitment on dropped top-tube gravel bike frame designsFinish - Black AnoWeight - 350mm - 400gHead Offset - 0mmDrop - 50mmLength - 350mm/400mmQuill Sizes - 27.2mm diameterMaterial - EA70 Alloy
The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tyred CX bike to modern gravel bikes.Increase the capability of your adventure rig with the EA70 AX Dropper postReliable cartridge designCan be paired with drop bar optimized lever or drop bar compatible shifterCable attaches from either direction for compatibility with all dropper leversTwo lengths for better fitment on dropped top-tube gravel bike frame designsFinish - Black AnoWeight - 350mm - 400gHead Offset - 0mmDrop - 50mmLength - 350mm/400mmQuill Sizes - 27.2mm diameterMaterial - EA70 Alloy
Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection. RideGrip™ PRO When it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather. When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance. Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes. Lock and Ride In order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 7.0 HydraDri Flat Pedal ShoesRain and mud are no match for the Leatt 7.0 HydraDri Flat Pedal Shoes. With their waterproof membrane, your feet are in for a treat when it's time for a mud-fest of a mountain bike session. Wet, muddy, slippery and slick trails are certainly a test of your mountain bike skills. They're also a test of equipment and motivation. But it's also a whole lot of fun. The 7.0 HydraDri Flat Pedal Shoes are made specifically for such testing conditions. And with such comfortable feet, you'll get a nice boost to your motivation to ride, ensuring you get the most fun even when it's wet. So how do the 7.0s keep feet comfortable? It starts with the Hydradri membrane construction. This provides a smooth and flexible outer 'bootie' with a waterproof fit, ensuring rain can't seep inside. At the ankle, an elastic snap closure also gives a close seal while a waterproof zipper closes the 'bootie' cover for complete wet-weather protection.RideGrip™ PROWhen it comes to wet weather grip on the pedals, the improved Leatt sole unit is unrivalled. It now features Leatt's RideGrip™ PRO compound. Using an incredibly grippy rubber, it provides superb traction on flat pedals, whatever the weather.When RideGrip™ PRO is paired with the enhanced WaffleGrip Pro pattern in the pedal area, you can be sure of all the grip you could need, inspiring you to keep pushing your mountain biking limits. It's tough too, resisting abrasions and tears for long-term performance.Not only grippy, but you'll also benefit from the dual-flex design of the sole. Across the pedal area, the shoe is stiffened, creating a supportive and efficient pedalling platform. Meanwhile, the more flexible toe section is just right for those times when you're pushing back up the hill. Mudflow channels also improve dirt-shedding, keeping the tread clearer when it's very muddy. Lastly, an anti-compression EVA midsole delivers excellent comfort and support over any terrain, from smooth flow trails to testing jump runs to steep rocky chutes.Lock and RideIn order to get a secure and comfortable fit, Leatt gives the 7.0 HydraDri their speed lace system. This allows you to get the right fit in place and lock it in place. Inside the shoes, you'll benefit from an Active Carbon insole. This provides quick-wicking and quick-drying comfort while also offering anti-bacterial and anti-odour properties, keeping feet feeling fresh every time you ride. Features:Hydradri membrane - 10K/10K Hydradri membrane waterproof/breathable bootie constructionStrategically placed TPU reinforcement on toe, heel and perimeterSpeed lace system and waterproof sealed zipElastic/ Push snap closure above the ankle for secure closureRideGrip™ PRO compound for improved pedal feel and controlSticky Leatt Lab compound sole for ultimate bike controlImproved WaffleGrip Pro pattern for enhanced grip with short pinsHeel and toe mudflow channels for grip in all-weather conditionsAnti-compression EVA midsole for comfort.Active Carbon insole - moisture-wicking, quick-dry, anti-bacterial, anti-odour materialBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.