Designed for use with quattro, egg beater and candy pedals.Composite platform and brass cleat,Float: 6 degrees,Release angle: 15 or 20 degrees,Bolt pattern: 3 bolt.If you would like to use your crankbrothers pedals on your road bike these cleats enable you to do just that. With them you can use your road shoes with the 3 bolt cleat fitting.
Designed for XC racers. the premium 0 degree cleat gives a fire engagement with reduced float, resulting in ultimate power transfer and efficiency. Compatible with all crankbrothers pedals.Premium strength brass,Float: 0 degrees,Release angle: 15 degrees,Bolt pattern: 2 bolt,Adjustmet 2.2mm left/right,Shims included.
Crank Brothers Premium Cleats are made of a premium brass for a longer life in adverse conditions, and lateral adjustment for pinpoint cleat location on the shoe.Key Features:Weight - 30g per pair,Float - 6 degree,Material - premium strength brass,Release angle - 15 degree or 20 degree,Compatibility - eggbeater, candy, smarty, mallet, acid,Shoes - mountain,Bolt pattern - 2-hole,Adjustment - 2.2mm left/right,Shims - included.
Ultra-durable brass cleats for crankbrother pedals.Key Features:Premium strength brass,Release angle: 10 degrees,Bolt pattern: 2 bolt,Adjustment: 2.2mm left/right,Shims included.
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike.Key Features:Shorter insertion length to fit more bikes,Premium Trelleborg® sealing,Exclusive Igus® LL-glide bearings and keys,Jagwire® cable and housing,Self-contained hydraulic cartridge delivers industry leading quality and reliability,Internal routing ,Quick connect mechanism for ease of cable installation,Linear actuator for quick return speed,2-bolt standard head,Remote sold separately .Specifications:60mm:Material: 7075-T6 aluminium,Max Extended Length: 270mm, 360mm,Max Insertion Length: 270mm Overall: 174mm, 360mm Overall: 264mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 270mm, 360mm,Warranty: 2 years,Weight: 27.2 (270mm overall): 400g, 27.2 (360mm overall): 440g.80mm:Material: 7075-T6 aluminium,Max Extended Length: 100mm,Max Insertion Length: 264mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 380mm,Warranty: 2 years,Weight: 27.2: 460g, 30.9: 550g, 31.6: 560g.100mm:Material: 7075-T6 aluminium,Max Extended Length: 241mm,Max Insertion Length: 220mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 370mm,Warranty: 2 years,Weight: 27.2: 480g, 30.9: 485g, 31.6: 503g, 34.9: 580g.125mm:Material: 7075-T6 aluminium,Max Extended Length: 290mm,Max Insertion Length: 245mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 421mm,Warranty: 2 years,Weight: 27.2: 505g, 30.9: 525g, 31.6: 545g, 34.9: 635g.150mm:Material: 7075-T6 aluminium,Max Extended Length: 337mm,Max Insertion Length: 270mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 469mm,Warranty: 2 years,Weight: 30.9: 565g, 31.6: 587g, 34.9: 685g.170mm:Material: 7075-T6 aluminium,Max Extended Length: 378mm,Max Insertion Length: 285mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 505mm,Warranty: 2 years,Weight: 30.9: 586g, 31.6: 609g, 34.9: 735g.
Features: Minimal and lightweight Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap Premium bearings & double seal system
These pedal cleats (sold as a pair) are compatible with all Crank Brothers pedals.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of riding remove the pedal body from the spindle and wipe it clean of any dirty grease apply fresh grease to the inside of the pedal before re-installing the spindle Pedal features: Excellent mud-shedding: the design is very open 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rid Fit adjustment: crank brothers premium cleats can be adjusted for 10° release Customise the fit between your shoe and the pedal by using tread contact sleeves Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in part When servicing this pedal, use the rebuild kit designed for level 1 & 2 pedals
These cleats are designed to be used with the Eggbeater, Candy and Quattro pedals and with shoes that have the standard road 3-hole bolt pattern.
Designed with a four-sided entry system, this professional level, titanium-made pairing gives a sturdy and secure performance, with their self-cleaning construction making sure mud and moisture build-up are kept at bay. Coming complete with brass cleats and mounting hardware, this hard-wearing pedal set is ideal for the rowdy mountain marauder.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of ridingremove the pedal body from the spindle and wipe it clean of any dirty greaseapply fresh grease to the inside of the pedal before re-installing the spindle