The Tried And True T-Shirt is a heavier weight 90% cotton, 10% polyester t-shirt with short sleeves and classic logo graphics at the left chest and back.
Forged 6061 aluminum with 3 mounting points. Wedge piece is included to adjust to the two seat angles that are most commonly used. Compatible only with Tripod seats only. ###section### Product Specs TYPE: Tripod LENGTH: 200mm DIAMETER: 25.4mm WEIGHT: 4.5oz
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Kevin Peraza Heat Wave short sleeve T-shirt from Demolition. Printed on Next Level Apparel. 100% Combed Ring-Spun Cotton weighing 4.3oz.
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminium for durability, with threaded inserts to bolt the stays directly into the seat clamp.
dhb Extreme Weather Neoprene Overshoedhb's Extreme Weather Neoprene Overshoe will help you through the deep winter, providing the best protection against extreme cold and heavy rain.Waterproof, Windproof, and WarmBy pairing a thicker 3.5mm neoprene with a tough TPU skin, the Extreme Weather Neoprene Overshoe is waterproof, windproof, and warm. This non-porous skin prevents any rain from being absorbed into the surface and protects against knocks and grazes. The underside of the overshoe features a robust Kevlar material, which is abrasion resistant. The Kevlar extends up around the toe and heel to prevent excessive wear when walking. The holes in the base for the cleats are patterned snugly to minimise the amount of road spray entering the shoe from below upwards.Velcro Closure and Reflective DetailingOnce the foot is in place it can be zipped closed and further secured with the Velcro top tab. 2 reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. Reflective side logo adds a spark of reflective in low light conditions.Features:Material: 81.10% Polyamide (Nylon), 18.90% PolyurethaneThick 3.5mm neopreneNon-permeable TPU outer skin Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseDurable size5 YKK rear zipperReflective vertical detailsSide logo detailBuy dhb Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
dhb Extreme Weather Neoprene Overshoedhb's Extreme Weather Neoprene Overshoe will help you through the deep winter, providing the best protection against extreme cold and heavy rain.Waterproof, Windproof, and WarmBy pairing a thicker 3.5mm neoprene with a tough TPU skin, the Extreme Weather Neoprene Overshoe is waterproof, windproof, and warm. This non-porous skin prevents any rain from being absorbed into the surface and protects against knocks and grazes. The underside of the overshoe features a robust Kevlar material, which is abrasion resistant. The Kevlar extends up around the toe and heel to prevent excessive wear when walking. The holes in the base for the cleats are patterned snugly to minimise the amount of road spray entering the shoe from below upwards.Velcro Closure and Reflective DetailingOnce the foot is in place it can be zipped closed and further secured with the Velcro top tab. 2 reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. Reflective side logo adds a spark of reflective in low light conditions.Features:Material: 81.10% Polyamide (Nylon), 18.90% PolyurethaneThick 3.5mm neopreneNon-permeable TPU outer skin Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseDurable size5 YKK rear zipperReflective vertical detailsSide logo detailBuy dhb Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
dhb Extreme Weather Neoprene Overshoedhb's Extreme Weather Neoprene Overshoe will help you through the deep winter, providing the best protection against extreme cold and heavy rain.Waterproof, Windproof, and WarmBy pairing a thicker 3.5mm neoprene with a tough TPU skin, the Extreme Weather Neoprene Overshoe is waterproof, windproof, and warm. This non-porous skin prevents any rain from being absorbed into the surface and protects against knocks and grazes. The underside of the overshoe features a robust Kevlar material, which is abrasion resistant. The Kevlar extends up around the toe and heel to prevent excessive wear when walking. The holes in the base for the cleats are patterned snugly to minimise the amount of road spray entering the shoe from below upwards.Velcro Closure and Reflective DetailingOnce the foot is in place it can be zipped closed and further secured with the Velcro top tab. 2 reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. Reflective side logo adds a spark of reflective in low light conditions.Features:Material: 81.10% Polyamide (Nylon), 18.90% PolyurethaneThick 3.5mm neopreneNon-permeable TPU outer skin Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseDurable size5 YKK rear zipperReflective vertical detailsSide logo detailBuy dhb Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
dhb Extreme Weather Neoprene Overshoedhb's Extreme Weather Neoprene Overshoe will help you through the deep winter, providing the best protection against extreme cold and heavy rain.Waterproof, Windproof, and WarmBy pairing a thicker 3.5mm neoprene with a tough TPU skin, the Extreme Weather Neoprene Overshoe is waterproof, windproof, and warm. This non-porous skin prevents any rain from being absorbed into the surface and protects against knocks and grazes. The underside of the overshoe features a robust Kevlar material, which is abrasion resistant. The Kevlar extends up around the toe and heel to prevent excessive wear when walking. The holes in the base for the cleats are patterned snugly to minimise the amount of road spray entering the shoe from below upwards.Velcro Closure and Reflective DetailingOnce the foot is in place it can be zipped closed and further secured with the Velcro top tab. 2 reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. Reflective side logo adds a spark of reflective in low light conditions.Features:Material: 81.10% Polyamide (Nylon), 18.90% PolyurethaneThick 3.5mm neopreneNon-permeable TPU outer skin Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseDurable size5 YKK rear zipperReflective vertical detailsSide logo detailBuy dhb Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
dhb Extreme Weather Neoprene Overshoedhb's Extreme Weather Neoprene Overshoe will help you through the deep winter, providing the best protection against extreme cold and heavy rain.Waterproof, Windproof, and WarmBy pairing a thicker 3.5mm neoprene with a tough TPU skin, the Extreme Weather Neoprene Overshoe is waterproof, windproof, and warm. This non-porous skin prevents any rain from being absorbed into the surface and protects against knocks and grazes. The underside of the overshoe features a robust Kevlar material, which is abrasion resistant. The Kevlar extends up around the toe and heel to prevent excessive wear when walking. The holes in the base for the cleats are patterned snugly to minimise the amount of road spray entering the shoe from below upwards.Velcro Closure and Reflective DetailingOnce the foot is in place it can be zipped closed and further secured with the Velcro top tab. 2 reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. Reflective side logo adds a spark of reflective in low light conditions.Features:Material: 81.10% Polyamide (Nylon), 18.90% PolyurethaneThick 3.5mm neopreneNon-permeable TPU outer skin Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseDurable size5 YKK rear zipperReflective vertical detailsSide logo detailBuy dhb Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Extreme Weather Neoprene Overshoes are the most protective of dhb's overshoe collection. The 3.5mm-thick neoprene provides the ultimate in insulation against both the cold and wet. Further protection comes via the TPU skin on the external face. This non-porous and flexible skin prevents rain from being absorbed into the surface of the overshoe. The underside of the overshoes feature a robust Kevlar material, extending around the toe and heel to prevent excessive wear when walking in the overshoes. The holes in the base for the cleats are shaped to fit snugly, minimising the amount of road spray entering the shoe from below. A durable, size 5, lockdown, YKK zip at the rear makes it easy to get them on and off.