Race Face Turbine Mountain Bike Seatpost The Turbine seatpost sets a new standard for a performance aluminum post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness.The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.Features: Race Face exclusive new Hunter head design Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head Thumbscrew tightening system allows quick dial in of the saddle angle by hand Angled clamp bolts allow easy tool access for hassle free adjustment and tightening The rubber seatpost grommet fully seals the post to prevent water entering your seat tube Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon Wide lower cradle gives extra rail support for lightweight saddle rails Narrow upper cradle increases the amount of forward/back saddle adjustment Tilt Adjustment 6° up 12° down with Zero offset The seatpost tube is 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio. Race Face's triple butting design maintains strength in critical areas while reducing overall weight. The tube is anodized & shot peened for increased fatigue life. Specifications: Built for: XC/Trail/AM Length: 400mm Weight: 260 grams (30.9)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Turbine Mountain Bike Seatpost The Turbine seatpost sets a new standard for a performance aluminum post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness.The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.Features: Race Face exclusive new Hunter head design Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head Thumbscrew tightening system allows quick dial in of the saddle angle by hand Angled clamp bolts allow easy tool access for hassle free adjustment and tightening The rubber seatpost grommet fully seals the post to prevent water entering your seat tube Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon Wide lower cradle gives extra rail support for lightweight saddle rails Narrow upper cradle increases the amount of forward/back saddle adjustment Tilt Adjustment 6° up 12° down with Zero offset The seatpost tube is 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio. Race Face's triple butting design maintains strength in critical areas while reducing overall weight. The tube is anodized & shot peened for increased fatigue life. Specifications: Built for: XC/Trail/AM Length: 400mm Weight: 260 grams (30.9)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Turbine Mountain Bike Seatpost The Turbine seatpost sets a new standard for a performance aluminum post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness.The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.Features: Race Face exclusive new Hunter head design Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head Thumbscrew tightening system allows quick dial in of the saddle angle by hand Angled clamp bolts allow easy tool access for hassle free adjustment and tightening The rubber seatpost grommet fully seals the post to prevent water entering your seat tube Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon Wide lower cradle gives extra rail support for lightweight saddle rails Narrow upper cradle increases the amount of forward/back saddle adjustment Tilt Adjustment 6° up 12° down with Zero offset The seatpost tube is 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio. Race Face's triple butting design maintains strength in critical areas while reducing overall weight. The tube is anodized & shot peened for increased fatigue life. Specifications: Built for: XC/Trail/AM Length: 400mm Weight: 260 grams (30.9)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.
Zipp’s Service Course seatpost is light weight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure low-profile clamp allows the saddle to slide farther back along the rails and with 0 and 20mm setback options it’s possible for nearly any rider to achieve the perfect fit. For high strength low weight and efficient use of every gram the shaft and head are not bonded but are 3D-forged from 6061 aluminum. The Service Course seatpost is 350mm in length. FEATURES Two cosmetic options bead-blast black or distinctive silver 2-bolt adjustability 3D-forged from 6061 aluminum Fits all common saddle rail types Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 350mm COLOR (SP) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel CLAMP MATERIAL Al-6061
Zipp’s Service Course seatpost is light weight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure low-profile clamp allows the saddle to slide farther back along the rails and with 0 and 20mm setback options it’s possible for nearly any rider to achieve the perfect fit. For high strength low weight and efficient use of every gram the shaft and head are not bonded but are 3D-forged from 6061 aluminum. The Service Course seatpost is 350mm in length. FEATURES Two cosmetic options bead-blast black or distinctive silver 2-bolt adjustability 3D-forged from 6061 aluminum Fits all common saddle rail types Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 350mm COLOR (SP) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel CLAMP MATERIAL Al-6061
Make old-school new again. This Adidas skate sweatshirt doesn't skimp on the retro vibes. Slip your phone and keys into the zip kangaroo pocket in front. The heavyweight cotton blend feels soft to the touch.
Down Under Mounted under your bar, the redesigned Turbine R 1x Seatpost Lever may just become your thumb's new best friend. This strong, lightweight lever is a real smooth operator that is a breeze to actuate. Optimized for use with our Turbine R dropper but will play nice with other posts.
The Mount Sherman is a men's sweatshirt from DickiesLife. Featuring the iconic Dickies logo on the chest in a dropped shoulder style.
In need of a rack Then the Central Seatpost rack form Blackburn does just the trick! There is no need to worry about having the correct frame mounts with this rack as it mounts off your seatpost leaving the back of your bike pretty much untouched!This rack is versatile and simple and the rack deck can adjust fore and aft but also flip over to better fit different sized bikes. This means whether you have a road bike, tourer or mountain bike this rack should work without a problem.No Frame Mounts RequiredAircraft Grade 6061 Aluminium TubingLight And Reflector Mounting LoopFits Seatposts from 22 To 32mm In Diameter10kg Carrying Capacity
Shimano 105 R7010 DM Brake Caliper - AUShips from Australia - Estimated delivery in 2-4 business days.The Shimano 105 BR-R7010 Direct Mount Brake Caliper features an elegant and sleek low-profile construction. Providing exceptional braking performance with modern, wide road race tyres and provides a smooth and light braking operation, where braking power remains sensational.Precise Braking ControlDesigned to be fitted to a direct mount frame or fork, where it provides advanced aerodynamic performance, gives your bike a clean look and will integrate perfectly with any Shimano SLR EV equipped brake/shift lever. This caliper design delivers flex-free braking control, ensuring that you are in complete control when coming into any corner, fast technical section or when you require precise braking accuracy to maintain your position at the front of the pack.Features: Material: Aluminium Intended Use: Road Series: Shimano 105 R7000 Mount Type: Direct Mount Reach: 51mm Compatibility: Shimano SLR EV Recommended Brake Shoe: Shimano R55C4 Max Tyre Width: 28c Compatible Rim Width Range: 20.8-28.0 mm Brake Type: Caliper Weight: 174g (per caliper)A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt MTB Gravity 4.0 JerseyCreated for the demands of racing mountain bikes downhill very fast, the Leatt MTB Gravity 4.0 Jersey is super-light, highly breathable and has a fit to save precious split seconds. The MTB Gravity 4.0 Jersey offers no-nonsense mountain bike performance, with all the features you need to ensure you can ride to your limits and beyond. No fuss. Just Fast.It starts with the ultra-light MoistureCool mesh material. Pull the Gravity 4.0 on and you'll be struck by how light it is. A barely-there feel. Cuffs and hems also benefit from welded seams, removing unnecessary bulk and boosting comfort. And once you're on track and ripping, the mesh material allows sweat to escape and for fresh air to easily circulate. A stain-resistant coating deals with dirt and mud kicked up off the trail while Brush Guard reinforcement adds durability. During races, split seconds count. And so Leatt have tailored the jersey to deliver a fit with a focus on speed. The stretch materials give a more streamlined fit while still offering you plenty of mobility. Vital for reflexive changes of direction and the instant manoeuvrability needed when mountain biking at the edge of control.The collar is compatible with a neck brace and the stretch fit also accommodates body armour. Pad up and push hard out of the start hut, the Gravity 4.0 certainly won't hold you back. Features:Materials: 89% Polyester, 11% Elastane Ultra-light, fitted race fitMoisture Cool mesh fabric with air channels for superior ventilationRacing stretch fit for riding with or without body armourStain-resistant fabric coatingBrush Guard reinforcement on elbowsWelded seams at cuff and hem for maximum comfortCollar design for use with or without a neck braceTwo side pocketsRear reflective detailBuy Leatt Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.