microSHIFT R8 RD-R32 8/9 Speed Rear DerailleurFeaturing a hard-wearing steel cage, this 8/9 speed rear derailleur offers the best balance of strength and durability as you clock up the miles on your road bike. microSHIFT has also kitted out this model with a tough steel outer link material for additional resilience and longevity on your travels. Another highlight is this version uses the same kinematics as the R9 and R10 series but is equipped with a construction made of steel and composite for great reliability. Specifically designed for compatibility with Shimano road groupsets, this rear mech gives you maximum flexibility when putting together a new build or updating components on an existing bike.Features: Cage Material: Steel Outer Link Material: Steel Use: Road Speed: 8/9 speed Cage Size: Long Cage Max Cog: 25-28T Capacity: 39T Clutch: No Compatibility: Shimano Road Compatible microSHIFT Groupset: R8Manufacturer's Part Number: RD-R32 Black Long CageBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Juice Lubes Chain Juice Dry Conditions Chain LubeWhether you're hitting the mountain bike (MTB) trails or clocking up the miles on your road bike, this chain lube features a high-tech and long-lasting formula that's ideal for dry to damp conditions. When applied to the chain, the carrier quickly “searches” its way in between all the pins and rollers of the chain which is where it is needed the most. At this point when the optimum penetration of the chain has been achieved relative to the amount of lube applied at that time, the carrier evaporates, leaving behind the lubricating element which is enclosed in a thin, dry to the touch film which does not allow loose, dry and lightweight contaminants to stick to it. This results in a cleaner and quieter chain.Dry Conditions Chain LubeJuice Lubes Chain Juice Dry guarantees crisp and silent shifts, no sticky gunk and tough-as-nails protection for your components. Chain Juice Dry is built with an Ethanol-based carrier that's super effective at penetrating the depths of your chain, then evaporating to leave a dry and natural wax barrier. It's reinforced with tough, long-lasting, synthetic additives that reduce noise and wear. It's also kind on the environment. Dry is designed to limit droplets from flicking when you're spinning away and is fully biodegradable to break down quickly and harmlessly.Ideal for MTB, road, gravel, commuter bikes and will stand up to big mileage with a single application.Features: Suitable for on/off road use Excels in dry or dusty conditions Sets up dry so not to attract dust and contaminants Extreme pressure additives increase chain life and drive train efficiency Biodegradable formula Recyclable packagingBuy Juice Lubes Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Juice Lubes Bearing Juice Waterproof GreaseOffering incredible sealing properties, this waterproof adhesive grease is specifically developed for low-speed applications, hubs, bottom bracket's, headsets, pivot bearings and pedals. Containing extreme pressure lubricity additives, this model provides excellent protection against corrosion with high resistance to water washout. It is also carbon safe.Bearing Juice is a tough-as-nails grease that's designed specifically for bicycle use. It's for all your bits with bearings - such as headsets, bottom brackets and hubs.When your bearings start spinning, Bearing Juice will kick in and release its magical lubricating juice, whilst also battling moisture and keeping your bike running sweeter for longer. It'll fight back moisture, it's tough against jet washing and it'll guarantee more time on the trails and less time in the workshop.Features: Waterproof with high resistance to water washout Adhesive grease with incredible sealing properties Excellent corrosion protection Contains extreme pressure lubricity additives Specifically designed for low speed applications, hubs, BB's, Headsets, Pivot Bearings, Pedals Carbon safe PCR Recyclable packagingBuy Juice Lubes Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cateye Wearable Mini Rear Bike LightA convenient rear light with a RED LED that is ideal for urban commuters with a versatile mounting system.MountingCateye’s Wearable Mini rear safety light comes with an integrated mounting strap. The rubber band mount fits 26.0-31.8mm with a longer version also included for use on helmets. The mount can be used to connect the light to your seat post, or your clothing, bag, etc.BatteryThe rear light is powered by the easily replaceable CR2032 battery that provides up to 550 hours of power.Light ModesThe light comes with three different light modes easily swapped between to suit your current lighting conditions and depleting battery life.Mode One (Constant): 60 hours battery lifeMode Two (Slow Flashing): 550 hours battery lifeMode Three (Rapid Flashing): 140 hours battery lifeFeaturesCompact and low-profile designIntegrated clip-on bracketAlso comes with rubber strap mountPowered by a CR2032 battery3 different light modesLight mode memoryWeighs 12gDimensions: 39 x 33 x 17mmBuy Cateye Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks Pre-Lube Universal Dirt Shield Gear KitGenuine brake cable spares from Clarks.Features: Outer Cable Length: 2500mm Inner Cable Length: 2250mm Pre-Lube Universal Dirt Shield Gear KitBuy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Alfine CDS ECO Rear Belt Drive SprocketThis genuine Shimano replacement rear belt sprocket is specifically designed for use with Shimano Alfine CDS ECO. Additionally, it is ideal for replacing your old or worn out existing model.Features: Genuine Shimano replacement partSuitable for Shimano Alfine CDS ECORear Belt SprocketBuy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X Rear Boost Conversion Kit allows for a 142x12mm hub to be converted to 148x12mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 142mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 142x12mm to 148x12mm
SKS S-Guard Clip-On Rear MudguardThe super lightweight S-Guard Mudguard weighs only 24g and protects your bottom from mud and water. Made of super soft yet tough profiled injection moulded material, the fast to fit clip on S-Guard mudguard fits to nearly every saddle and can be used across a variety of bikes. The S-Guard mudguard can also be fixed with a cable tie.Features:Suitable for trekking, travel, cross and fitness bikesSuitable for racing bikesSuitable for mountain bikes5 years manufacturer's warrantyLength: 290mmWeight: 24gBuy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series Zinc Coated Headset BearingMade from hard-wearing steel and boasting a zinc-plating to extend its lifespan, the 40-Series Headset Bearing delivers a super-smooth rotation for fine steering control that lasts. Ready to combine with your Cane Creek headset cups, this versatile bearing can be used for road or Mountain Bike (MTB) and operates consistently even in the wettest weather and harshest riding conditions.Features: Material: Zinc-plated SteelHeadset Type: Fully IntegratedHeadset Compatibility: Cane Creek 40 series headsets Use: Road, Mountain Bike (MTB) Steerer Compatibility: 1.1/8" straight steerersAvailable in various sizesSold individuallyPrecision engineered by Cane Creek in Fletcher, North CarolinaTechnologies:ZN40 Bearings: These bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of the 40 series headsetsBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Rear Disc Brake Mount Screws (25-29mm)This 34mm caliper mount screw set is what is required to mount a Campagnolo hydraulic brake caliper to a frame that has a 25 - 29mm chainstay depth at the flat mount point. Features:Included: 2 x 34mm length for 25 - 29mm thick rear mount Compatibility: Campagnolo disc brakesBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Rear Disc Brake Mount Screws (30-34mm)This 39mm caliper mount screw set is what is required to mount a Campagnolo hydraulic brake caliper to a frame that has a 30 - 34mm chainstay depth at the flat mount point. Features:Included: 2 x 39mm length for 30 - 34mm thick rear mount Compatibility: Campagnolo disc brakesBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo 35-39mm Rear Mount ScrewsThis 44mm caliper mount screw set is what is required to mount a Campagnolo hydraulic brake caliper to a frame that has a 35 - 39mm chainstay depth at the flat mount point.Features:Included: 2 x 44mm length for 35 - 39mm thick rear mount Compatibility: Campagnolo disc brakesBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.