More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS™ derailleur is the brain of the whole AXS™ system. Trim it at set-up for zero rub, making the near-silent operation of Eagle™ even more stealth – all while improving drivetrain longevity. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle™. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab.Key Features:XC focus and trail ready,Carbon cage,Ti hardware,Rainbow colourway,Eagle™ technology,Overload Clutch protection,AXS™ enabled componentry software that makes it possible to both program and personalizes new SRAM and RockShox components,The system is completely water and dust proof to IP69K,Eagle AXS™ is designed to work with X-DOME™ Eagle™ cassettes only, providing the most precise, silent, and reliable shift performance available.,Battery sold separately,.Specifications:Speed (RD): 12s,Cable pull ratio: n/a,Cage (RD): n/a,Max tooth: 50,Colour (RD): Black,Pulley bearings material: Steel,Cage material (RD): Carbon,.
The SRAM XX1 Eagle AXS derailleur carries over many of the features of the mechanical XX1 derailleur, such as the useful Cage Lock and Type 3 Roller Bearing Clutch. Added to this are several all new technologies that help improve performance and durability. Wireless design is incredibly easy to installDerailleur cage is 10mm shorter than regular Eagle derailleurs to improve ground clearanceOverload Clutch helps to protect derailleur from direct strikesType 3 Roller Bearing Clutch provides impeccable chain retentionWater and dust-proof to IP67K to shrug off the elementsControlled by SRAM's new AXS technology, the derailleur offers crisp, instantaneous shifting and a super-clean cable free design, taking mere seconds to install and sync with the AXS controller using the AXS app. Further improving shifting and durability is the Overload Clutch. This works to protect the rear derailleur in case of a direct strike to it from a trail-side obstacle or crash, protecting the derailleur and keeping it shifting smoothly. The pulley cage is also 10mm shorter for improved clearance, further reducing the risk of damage. The system is completely water and dust proof to IP67K, so the elements are shrugged off with ease. The battery is shared with other AXS and eTap components, so can be swapped if needed and lasts between 20-30 hours of riding between charges. SRAM sought to raise the bar with XX1 Eagle AXS and they have succeeded; the XX1 Eagle AXS Rear Derailleur is a breeze to install and provides next-level shifting performance.
Born out of World Cup downhill racing, our LG1 Race Carbon Enduro wheels are ready for anything you can throw at them.All-aluminum hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tyres 2.3-2.6" wide. Key Features: Engagement: 6 Degree, Rim: World-Cup developed carbon layup, hookless, 30mm internal width with Lifetime Guarantee,Freehub Mount: Microspline Drive, XD Driver, Hub: Triple-sealed, fully machined aluminium hub w/6 degree engagement.,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom Hive triple-butted black steel spokes, black alloy nipples, nipple washers (x28),Axle: 148 x 12mm,Drilling: 28h,Material: Carbon,Width: 30mm internal width.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.