Designed for use with the common 31.8mm bar thickness, you can install the Enduro stem in two ways. Run it in its standard upright position for a more relaxed ride, or flip it over and run it the other way for a more aggressive position. This lower option makes it ideal for use with modern MTB’s larger 27.5” or 29” wheels.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Available in either a 500ml or 750ml option, this superlight drinking flask is designed to compress as you drink making it easy to carry home. Sized to fit right inside your bib tight pocket for easy storage and carriage, the Horizon Enduro also features a bite valve making it easy to drink from on the move without spillage.
Silicon Gel lining ensures that the knee sleeve stays in the same position no matter how fierce your cadence is, preventing slippage and allowing you to focus on the trail ahead.
Fastening spares to your frame eliminates the need to carry a bag or will give you extra space in your bag for other essentials, snacks and water. One of these straps will comfortably carry a spare inner tube and two CO2 canisters. These straps are available in two lengths, 38cm for saddles and 60cm for frames. How to Use: · 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) · 2. Lay the strap flat, with the side with the rubber grip area facing you · 3. Place the inner tube on the strap and secure it in place using the two loops · 4. Turn the strap over · 5. Push your accessories between the strap & the tube · 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle · 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place · 8. When mounting to your frame, ensure that the strap does not obstruct your shock or get in the way of other moving parts · 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened · 10. Go and enjoy your ride
Ready for enduro racing, these pedals feature a tough aluminium platform construction. This makes them more than capable of handling all the abuse that's associated with attacking the mountain bike trails. Nukeproof has also put these through a forging and CNC-machining process, which means you'll benefit from their excellent robustness without adding any excess weight to your MTB. Sam Hill MTB Pedals Developed by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are engineered for high-performance. As per Sam's request, these share the award-winning Pro pedal concaved platform to ensure comfort and control on the longest of rides. Coming complete with CrMo (chromium molybdenum) axles, the Nukeproof Horizon Pro Sam Hill Enduro Race Pedals are a perfect upgrade for riders who want dependable pedalling performance on every MTB ride. Nukeproof Flat Pedal Instructions available to view and download. Manufacturer Part Numbers: Black: 102270551SH03PEDFLBLK Brown: 102270553SH03PEDFLCOP Blue: 102270552SH03PEDFLBLU Grey: 103257409SH03PEDFLGRY Purple: 103257410SH03PEDFLPUR Red: 103257411SH03PEDFLRED
This stem features a robust alloy construction, which makes it ideal at withstanding all the intensity that comes with all-day epics in the mountains. One final highlight is it features a 31.8mm clamp diameter for quick and easy installation with compatible bikes.
Lightweight and tubeless ready with a 40mm width, this rim is perfect for mountain bikers looking for an advantage against rolling resistance uphill as well as sturdiness for added control on the downhill.
The Brand-X EH1 Enduro Helmet has been designed and developed by riders wanting to maximise comfort, style and safety. The in-mould construction in combination with our lightweight shell and EPS inner has allowed us to save weight and add ventilation where you need it most, maximising comfort on any ride. The low rear profiling provides additional rear protection and the low-slung retention system grips the helmet firmly to your head and is fully adjustable to guarantee the perfect fit. The visor is height adjustable and is loosened off and moved with a bolt either side. Sealed anti-bacterial padding that is both removable and washable provides additional comfort and keeps things clean for future rides.
Keeping sweat away from the body while delivering a supreme level of protection, the Critical Enduro Elbow Sleeve wicks away moisture thanks to towel fabrics also increasing levels of comfort. Helping to reduce abrasions, the silicon gel lining prevents unwanted slippage while ventilation is maximised through the lightweight mesh.
These grips feature a soft, very grippy compound, which makes them perfect for long days riding and sure to provide excellent grip regardless of the weather conditions. These grips have been used by Sam when riding the toughest stages in the world of MTB racing, in the most demanding conditions. Featuring an Enduro race compound, these grips are designed for enduro race days to give excellent grip and comfort, this does mean they will wear quicker than the A15 Sam Hill Grips. Perfect for World Level Racing and Weekend Trail Sessions Alike Nukeproof and Sam Hill work together to create World Level products that everyone can use. The Sam Hill Enduro Race Grip was first used by Sam in round 4 of the 2018 Enduro World Series (EWS) where he took the win and has been using them ever since. After that race, he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips. Nukeproof Sam Hill Enduro Race Grip installation instructions are available for download HERE.
Following on from the success of the Nukeproof A15 durometer Sam Hill Series Grips, which Sam rode to overall EWS victory in 2017, Sam asked Nukeproof to develop an even softer compound for long days on the bike riding the toughest Enduro stages in the world. These are Sam’s special edition oil slick clamp version. Perfect for Enduro Racing Extra Soft Compound Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, they have helped to produce World level products that everyone can use. These grips were first used by Sam in round 4 of the 2018 EWS where he took the win and has been using them ever since. After that race he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips.