MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 688,Dimensions: 8mm x 16mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 3.90g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Bearing Code: 6710 2RS,Dimensions: 50x62x6,ABEC: 3 ,Grade: 10,Seals: 2RS,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 67.00g.
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: 6903/29.5,Dimensions: 17mm x 29.5mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 13.31g.
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: MR 2437,Dimensions: 24mm x 37mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 18.86g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 7803 (71803),Dimensions: 17mm x 26mm x 5mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 7.60g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6806, Dimensions: 30mm x 42mm x 7mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 21.25g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 6202, Dimensions: 15 x 35 x 11mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 30.25g .
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: F6802 LLU MAX-E BO, Dimensions: 15 x 24/26 x 5/7mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots , .
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Key Features: Bearing Code: 36 x 45, Dimensions: 30.2 x 41 x 6.5mm, Contact Angle: Inner 36 degree, Outer 45 degree, ABEC: 3, Grade: 10, Seals: LLB, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 19.24g.
Martello hammers home the performance you expect, on the most demanding Enduro and DH courses. Looking for the one tyre to tackle a wide range of courses? This is the ticket. How does the Martello deliver this level of performance? Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers!4 compounds in the tread (4C) for unparalleled traction on technical courses,GRAPHENE 2.0 compound delivers ultimate wet grip,Progressive sipe angle pattern increases cornering grip,Square knobs offer stability and durability,Versatile all-conditions tyre.Key Features:Material: Nylon 120 TPI,Compound: 4C Graphene 2.0,Discipline: MTB Enduro / EMTB,Bead: TLR.
The muddiest DH course conditions possible have inspired the Mota DH tyre. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world class grip across the most slick surfaces. The Mota tread features the same progressive width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tyres possible, the Mota is your answer.4 compounds in the tread (4C) for unparalleled traction on technical courses,GRAPHENE 2.0 compound delivers ultimate wet grip,Progressive sipe-width pattern provides tactile grip at the knob surface without compromising on speed or grip,Generous tread spacing allows for immediate shredding of mud and debris,Aggressive tyre for wet weather and muddy conditions.Key Features:Material: Nylon 120 TPI,Compound: 4C Graphene 2.0,Discipline: MTB Enduro / EMTB,Bead: TLR.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6802, Dimensions: 15mm x 24mm x 5mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 6.71g.