Never skimping on the strength, this lever is made from forged and machined 6061-T6 Aluminum for lightweight durability. To give your thumb a secure surface that it won't slip off of, this lever is covered with a textured non-slip pad.This lever is a sure thing with Race Face dropper posts, but it also actuates most cable operated posts needing 11mm or less of cable pull. Fitting nicely under your bar Turbine R 1x seatpost lever may just become your thumb's new best friend. Made strong, this lever works flawlessly and requires less force to actuate it. Optimized for Race Face but will work with other dropper posts. Specification:Lever ActuationMechanical,Compatible WithMatchmaker,Includes:Cable and Housing,Weight:66g.
Wolf Tooth RockShox Reverb Sustain Dropper RemoteThis remote sustain is used to simplify the actuation system, accelerate return speeds, improve tactile feedback and reduce level throw for a better ride. By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility:Compatible with RockShox Reverb B Spec Stealth (internal) routing dropper posts. Not compatible with A1 spec Reverbs. Not compatible with non-Stealth (externally routed hydraulic hose). ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Features: Clamp Diameter: 22.2mm Dropper Post Compatibility: Rockshox Reverb B Spec Stealth internally routed NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) Manufacturer's Part Number: WTREMOTESUSBCLMPBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Compatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.,ReMote for Hope is only compatible with Tech 3 brakes..Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation Instructions Compatibility: Compatible with all cable actuated dropper posts., Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware.,ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware.,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above),ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware.
These limited edition Wolf Tooth ReMote Dropper Levers in anodised colours are ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation InstructionsCompatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..Mounting Types:ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Key Features:Compatible with all cable-actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, wolf tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the light action will work best. If it is less than 52mm, the standard remote will work best.Mounting types:,Remote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max..
Perfect for accompanying you on your off-road pursuits, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trails and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of robustness to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rebellious rides. RockShox Reverb B-Post Dropper Remote Engineered for use with RockShox Rever B-posts, this hard-wearing model is kitted out with a leak-proof and low-maintenance mechanical actuation system. This makes it incredibly easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is the ultimate choice of upgrade for riders who want smoother and more dependable drops as you dominate across the woodland.
Wolf Tooth ReMote Sustain Dropper LeverIdeal for accompanying you on your off-road adventures, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trees and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of durability to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rowdy rides. RockShox Reverb B-Post Dropper RemoteDesigned for use with RockShox Rever B-posts, this hard-wearing model is equipped with a leak-proof and low-maintenance mechanical actuation system. This makes it immensely easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is a perfect choice of upgrade for riders who want smoother and more dependable drops as you dominate across the mountain. Features: Body Material: 6061 T6 Aluminium Axle and Pusher Material: Delrin Use: MTB Seatpost Compatibility: RockShox Reverb B-post Clamp Compatibility: Shimano IS-AB Weight: 31g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
XLC External Dropper Seat PostEngineered for reliable performance for a wide range of riding disciplines, this versatile seatpost is ready for wherever your next adventure takes you. It features a robust aluminium build, which gives it an excellent balance of strength and durability on your ride. Benefitting from 125mm travel and a 31.6mm diameter, this model is well-equipped for the demands of modern MTB trail riding and trekking.Remote Actuated Dropper SeatpostThis dropper seatpost comes with a handlebar lever remote and a cable for flawless adjustability while on the move. By installing the included lever remote to your handlebar and attaching the cable to the seatpost, you'll enjoy powerful and consistent actuation without having to take your hands off your handlebar. This provides more safety and freedom of movement on your bike, without having to dismount to adjust your saddle height. As a result, the XLC Dropper Seat Post is a great choice of upgrade for a wide range of riders that allows for quick and intuitive adjustability on the move.Features: Material: Aluminium Use: Mountain Bike (MTB), Trekking and City Diameter: 31.6mm Travel: 125mm Length: 400mm Cable Routing: External Cable Routing Actuation: Remote Operated Included: Seatpost, Lever and Cable Weight Limit: 120kgManufacturer's Part Number: 88219852 Black 31.6x400mm 125mmBuy XLC Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth Remote BarCentric dropper lever is a compact, slender dropper lever ideal for already crowded handlebars. The design easily fits between the left grip and levers. There are four potential lever positions so it doesn’t interfere with front shifters, lockout levers, or e-bike controls. The dropper lever is a ring shape that encompasses any mountain bike handlebar. A large smooth bearing encircles the handlebar making for easy use and action. Key Features: Slender dropper lever to fit on already crowded handlebars,Compatible with all cable actuated dropper posts,Works with dropper posts that have the barrel end of the cable either at the remote or post,Works with any mountain bike handlebar,Adjustable reach,6061-T6 aluminium,Weight 41g.
Brand-X Ascend II XL Dropper Seatpost (170mm)Ideal for taller cyclists or those who like the option of more height adjustment, the Ascend II XL is Brand-X's dropper post for the multi position rider. With 170mm of travel at its disposal, this externally routed seatpost provides a super steady adjustment to ensure your saddle is always right where you need it to be.Efficient and Smooth Action Dropper SeatpostThe post comes with an ergonomic 1X lever and the cable is actuated from the mid cap to eliminate any cable movement. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.Features:Material: AL6061-T6 AluminiumCable Routing: Bar mounted remote lever and cable operated external routingOffset: ZeroClamp Head: One-Piece, upper shaft with micro adjust clamping mechanismDimensions: Diameter: 30.9mm, Full Length: 489mm, Shaft Length: 264mmTravel: 170mmCable Length: 1.5mFinish: Sand-blasted, anodised blackRider Weight: Min: 50-55kg; Max: 120kgWeight: 670gMinimum Insertion Length InformationSize Minimum Insertion Length Minimum Insertion Length including the actuator (mm)31.6mm x 489mm 170mm 100 13830.9mm x 489mm 170mm 100 138Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.