These limited edition Wolf Tooth ReMote Dropper Levers in anodised colours are ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation InstructionsCompatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..Mounting Types:ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
The Wolf Tooth Remote BarCentric dropper lever is a compact, slender dropper lever ideal for already crowded handlebars. The design easily fits between the left grip and levers. There are four potential lever positions so it doesn’t interfere with front shifters, lockout levers, or e-bike controls. The dropper lever is a ring shape that encompasses any mountain bike handlebar. A large smooth bearing encircles the handlebar making for easy use and action. Key Features: Slender dropper lever to fit on already crowded handlebars,Compatible with all cable actuated dropper posts,Works with dropper posts that have the barrel end of the cable either at the remote or post,Works with any mountain bike handlebar,Adjustable reach,6061-T6 aluminium,Weight 41g.
Designed for the rigours of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It includes a hinged handlebar clamp for 22.2mm handlebars, allowing you to easily install it and enjoy quick and intuitive operation. All mountain bike handlebars are 22.2mm where your shift and brake levers attach, even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTECLMP Black 22.2mm
Wolf Tooth ReMote Dropper Lever for Matchmaker XCompatible with SRAM Matchmaker X brake levers to give you a clean look on your bars, this universal dropper seatpost remote lever works with all mechanical-type droppers and brings you fast, accurate and smooth control of your saddle height. Made by Wolf Tooth from a tough 6061 T6 aluminium, it’s ready for aggressive use as you drop your saddle out of the way for wild descents and raise it back up for more attacking the climbs more efficiently.Low-Profile Dropper LeverEasy to use, this tough component is kitted out with a low-profile lever which sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control that feels like a natural extension of one of your limbs. Also, to reduce the likelihood of knee contact in technical terrain sections, it offers more space around your bars to overcome challenging riding situations.Integrated Cable AdjustmentEquipped with a barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Compatibility: SRAM Matchmaker X Weight: 38.5g (approx.) Please Note: As this model is designed to combine with your SRAM Matchmaker X compatible brakes, it does not come with its own round handlebar clamp.Technologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing Low-Profile, Light Action lever: The ReMote LA (light action) lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals Integrated Cable Adjustment: The ReMote LA's barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here High-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed to keep you in full control across mixed terrain surfaces, the superb Wolf Tooth remote is packed when some of the finest technologies for flawless dropping performance. Solving many of the common problems associated with dropper remotes, this version offers a compact, ergonomic and sturdy build for assisting you across every inch of the mountain. Low-Profile Dropper Lever Easy to use, the super tough Wolf Tooth dropper post remote is kitted out with a low-profile lever which sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control which feels like a natural extension of one of your limbs. Also reducing the likelihood of knee contact in technical terrain sections, it gives you more space around your bars to overcome challenging riding situations. Integrated Cable Adjustment Equipped with a solidly-mounted barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up. Technologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here. High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.
The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation Instructions Compatibility: Compatible with all cable actuated dropper posts., Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware.,ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware.,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above),ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware.
Wolf Tooth Remote Light Action Dropper LeverMade from tough 6061 T6 Aluminium, this universal dropper seatpost remote from Wolf Tooth is ready for the toughest trails and requires much less effort to operate than most remotes on the market. An ideal upgrade from your dropper’s factory-fitted model, it has a longer arm and a light actuation. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Handlebar Clamp Compatibility: Standard 22.2mm Clamp Compatibility: SRAM Matchmaker X Mechanical or Hydraulic: Mechanical (cable operated) Weight: 38.5g (approx)Technologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing Low-Profile, Light Action lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here High-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Compatible with all cable-actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, wolf tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the light action will work best. If it is less than 52mm, the standard remote will work best.Mounting types:,Remote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max..
Perfect for accompanying you on your off-road pursuits, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trails and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of robustness to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rebellious rides. RockShox Reverb B-Post Dropper Remote Engineered for use with RockShox Rever B-posts, this hard-wearing model is kitted out with a leak-proof and low-maintenance mechanical actuation system. This makes it incredibly easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is the ultimate choice of upgrade for riders who want smoother and more dependable drops as you dominate across the woodland.
Wolf Tooth ReMote Sustain Dropper LeverIdeal for accompanying you on your off-road adventures, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trees and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of durability to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rowdy rides. RockShox Reverb B-Post Dropper RemoteDesigned for use with RockShox Rever B-posts, this hard-wearing model is equipped with a leak-proof and low-maintenance mechanical actuation system. This makes it immensely easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is a perfect choice of upgrade for riders who want smoother and more dependable drops as you dominate across the mountain. Features: Body Material: 6061 T6 Aluminium Axle and Pusher Material: Delrin Use: MTB Seatpost Compatibility: RockShox Reverb B-post Clamp Compatibility: Shimano IS-AB Weight: 31g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Reverb B MTB Dropper Sustain Cable KitThis sustain kit allows you to use your Wolf Tooth ReMote along with your RockShox Reverb B mount seat post. Easy to install, this kit is ideal for riders who want to enjoy improved feedback, increased return speed and reduced leverage from their RockShox Reverb seat post.Features: Fitment: RockShox Reverb B Compatibility: Wolf Tooth ReMote Manufacturer's Part Number: WTSUSTAINBKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This lever and cable conversion kit is specifically designed for mountain bike (MTB) riders who have a Rockshox B-post and a SRAM matchmaker clamp. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category. UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTESUSBMM