The DriVe road bar solution gives progressive sizing along with ergonomics specifically designed for current road bike geometry and shifter hood shapesBy giving variable reach in 5mm increments, a rider/fitter is able to fine tune the reach of their bike,The area right behind the shifter hood has a reduced slope of 7° - delivering a seamless transition from bar to shifter/brake hood without affecting how the drops were designed to fit the hand,By expanding the 31.8mm diameter to the end of the bar there is an increase in the useable area to allow for more hand positions and alleviate pressure points,Constructed from double butted 6061-T6 AL,Size specific ergonomics,Clip on aerobar compatible.
Key Features:With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear,The removal of traditional mechanical cables in favour of electrical wires eliminates poor shifting caused by contaminates, corrosion and stretching, and also gives effortless gear shifts,Simply pressing tactile buttons allows effortless and comfortable shifting even when your hands are cold,Climbing twin button satellite shift switch is used to operate the rear derailleur whilst your hands are on the top of the bars, one button up , one button down,To be plugged direct in to E-tube drop bar STI shifters,Shift switch is supplied with 260.5 mm E-tube electrical cables installed,Weight is 30 grams a pair.
Giant Connect XR Drop Handlebar is a lightweight 6061 aluminium construction handlebar with an ovalised top profile for increased control and comfort, with dual radius drops that flare outwards for increased stability when riding on the drops. Clip-on compatible. Short and shallow 75 / 120mm reach and drop for easy access to the controls,Dual Radius drops flare outward for greater stability on the drops,Ovalised top profile for greater comfort ,290g (420mm) ,Clip-on compatible,6061 aluminium alloy construction,Comfortable dual-radius drop,Sizes : 38cm / 40cm / 42cm / 44cm width options (measured centre to centre).
The Single speeder s choice.The new SRAM 900 and 500 brake levers are the perfect match for riders needing only a single gear. Available with a unidirectional carbon or aluminium lever, the new SRAM brake levers are fully compatible with SRAM Red, SRAM Force and SRAM Rival brake calipers.The Single speeder's choice,Material: Aluminium.
High performance, lightweight levers designed to solve the problem of cable pull for the drop bar rider who wants disc brakes or linear style brakes. This is a great option for single speeds or commuter bikes with drop barsCold forged 6061-T6 aluminium leversExclusive rubber compound310g.
The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Compatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.,ReMote for Hope is only compatible with Tech 3 brakes..Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
Any dropper post with a 25mm or 26mm stanchion diameter - when in doubt, measure your stanchion.,Note that discrete position droppers will likely lose the lowest position because the valais 25 reduces the dropper travel by 25mm,Valais 25.25 (posts that have a confirmed 25mm diameter)Easton haven,Giant contact (internal routing),Raceface turbine,Rockshox reverb stealth,Specialized command post,9point8 fall line,Other 24.75-25.25mm (cable routing dependent),.,· valais 25.26 (posts that have a confirmed 26mm diameter)Thomson covert,Fox transfer,Other 26-26.5mm (cable routing dependent),.,Valais limits the dropper travel by at least 25mm. There are 2 models as noted in the compatibility section, one for the 25mm diameter stanchions and one for the 26mm stanchions.,At full compression, the valais' deep skirt contacts the seal collar first and will not contact the seal lip (protecting delicate seals from damage).Installation:,Remove the screw and slide valais over the seatpost stanchion,Put the valais at the highest position, install the screw and tighten to 2-3 nm,Install your saddle bag with it as full as it will be on the trail.,Let all the air out of your frame shock, drop the post, and compress the bike suspension all the way.,Assure there is adequate tyre to saddlebag clearance. If there is not tyre clearance, raise the dropper, and lower the valais until there is adequate tyre to saddlebag clearance.,Re-inflate your shock and be sure that the valais is torqued to 2-3 nm.
Minoura: The Minoura QR Skewer for enclosed dropout style features a coupling that is designed to fit every Minoura trainer.FEATURESThe coupling on every Minoura trainer is designed to fit this skewer head only,No problem on using this skewer even for on-road riding,Fits up to 145mm over-locknut size,Special design so that it fits Breezer drop outs as well.
The all new Vario™ 1x Dropper Lever is the perfect complement to our new Vario™ Infinite Dropper Post.. or any cable actuated dropper seatpost! The angle-adjustable paddle pivots on dual cartridge bearings allowing for a smooth and light action, while grip tape on the paddle ensures no-slip operation. The Vario 1x lever is topped by a durable aluminum body. It's Matchmaker™ compatible, and perfectly integrates with all common brake levers. The Vario™ body allows for custom setup with three different clamp mounting positions to match rider preference and cockpit configuration. Key Features: Compatibility: Works with any cable-actuated seatpost that requires cable anchor to lever. Matchmaker™ compatible., Adjustable paddle with grip tape Matchmaker™ compatible Alloy body with three position mounting Dual bearing light action blade Cable anchored at lever,Included: Dropper lever w/ bar clamp, Cable & housing, 2000mm,Mount: Bar clamp, or Matchmaker™ mount.,Weight: Vario 1x lever 73g.
Miche Performance 57mm Deep Drop Brakes bring you nicely modulated stopping power in a dual-pivot design, made from lightweight alloy.Available in a choice of either anodised silver or black, forged 57mm drop with 16mm of adjustability (between 41 and 57mm) give ample clearance for mudguards."Excellent value for money and a particularly good choice for cost conscious audax and winter bike builds."Key Features:Special steel chrome-plated screws and nuts,Heat-treated steel pivots,Anodised silver or black,Light weight alloy,41-57mm drop,Dual pivot,Weight 325g.Note: Image for illustration purposes only
Key Features:Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance,CNC machined from solid 6061 aluminium to exact tolerances,Stiffer than any original equipment hanger which improves shifting performance,Still breaks before your frame does to perform its main function,All hangers come with instructions and hardware,Direct replacement for original equipment with guaranteed fit,Black anodised for extra scratch and damage resistance,Laser etched for easy part identification.
SpecificationsMaterial (HB): AL-6061,Reach (HB): 80mm,Drop (HB): 125mm,Width (center-to-center): 38cm, 40cm, 42cm, 44cm,Clip compatible: Yes,Clamp diam: 31.8mm,Ramp angle: 7°,Outsweep: 4°,Backsweep (degrees): n/a,Drop shape: Anatomic,Clamp width: 120mm,Finish (HB): n/a,Drop Flare: n/a.