Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Clamp Conversion KitThe Wolf Tooth Remote Clamp Conversion Kit attaches to bars with a 22.2mm diameter. Featuring delrin and aluminium parts, this kit offers durable and reliable performance alongside your Wolf Tooth ReMote dropper lever (available separately).Features: Material: Delrin and Aluminium Use: MTB Diameter: 22.2mm Type: 22.2mm Flat bar clamp conversion kit Compatibility: Wolf Tooth ReMote seat postTechnologies: Cable clamping bolt is a M4 x 6mm socket head cap screw with an M4 flat washer. Delrin and aluminium parts. For 22.2mm handlebar clamps, attach with 1 NM max (it does not take much!).Manufacturer's Part Number: WTCLMP22KIT Black 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Dropper Remote Clamp Conversion KitThis kit is specifically designed for use with Hope brakes. By attaching the dropper level to a brake caliper, this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means that the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible.Features: Compatibility: Hope brakes Manufacturer's Part Number: WTHOPECONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Lever AxleThis replacement axle is perfect for riders who need to replace or update the axle on their Wolf Tooth ReMote dropper lever. Ideal for repairing your Wolf Tooth ReMote dropper lever or updating worn-out elements with high-quality parts. Wolf Tooth know that crashes happen, so to save you from having to replace the whole Wolf Tooth ReMote, the brand designed the inexpensive plastic axle to be the weakest part. Genuine Wolf Tooth spare part.Features: Material: Plastic Use: MTB Compatibility: Wolf Tooth ReMote Genuine Wolf Tooth spare part Manufacturer's Part Number: WTREMOTEAXLEBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Barrel AdjusterThis barrel adjuster is perfect for replacing your old or lost existing barrel adjuster on your Wolf Tooth ReMote. Repair your ReMote or update worn-out elements with high-quality parts. We know that crashes happen so to save you from having to replace the whole Wolf Tooth ReMote, Wolf Tooth designed the inexpensive plastic axle to be the weakest part. We sell adapter kits if you want to move your remote to a different cockpit or change brakes. Genuine Wolf Tooth spare part. Features: Compatibility: Wolf Tooth ReMote Genuine Wolf Tooth spare part Manufacturer's Part Number: WTREMOTEBARRELADJBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote BoltIdeal for replacing the lost bolt that came with your Wolf Tooth ReMote, this is a high-quality and genuine spare part.Features: Use: MTB Compatibility: Wolf Tooth ReMote Includes: 1x cable clamping bolt and 1x washer Manufacturer's Part Number: WTREMOTEBOLTBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Reverb B MTB Dropper Sustain Cable KitThis sustain kit allows you to use your Wolf Tooth ReMote along with your RockShox Reverb B mount seat post. Easy to install, this kit is ideal for riders who want to enjoy improved feedback, increased return speed and reduced leverage from their RockShox Reverb seat post.Features: Fitment: RockShox Reverb B Compatibility: Wolf Tooth ReMote Manufacturer's Part Number: WTSUSTAINBKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth RockShox Reverb Sustain Dropper RemoteThis remote sustain is used to simplify the actuation system, accelerate return speeds, improve tactile feedback and reduce level throw for a better ride. By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility:Compatible with RockShox Reverb B Spec Stealth (internal) routing dropper posts. Not compatible with A1 spec Reverbs. Not compatible with non-Stealth (externally routed hydraulic hose). ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Features: Clamp Diameter: 22.2mm Dropper Post Compatibility: Rockshox Reverb B Spec Stealth internally routed NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) Manufacturer's Part Number: WTREMOTESUSBCLMPBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Transfer SL Factory Dropper Seat PostThis versatile dropper seat post is engineered for performance and it's ready for everything from backroad adventures to cross country (XC) racing. It's part of Fox Suspension's prestigious Factory Series that's World Cup proven and includes the best-of-the-best technology, so you can stay in full control wherever your next ride takes you. Coming equipped with a genuine Kashima upper coating, it provides buttery smooth, ultra-durable operation, while its anodised lower coating delivers extra protection against wear and corrosion. Another highlight is its coil spring, internal cable routing and travel configuration options that are specifically developed for the rigours of gravel riding and cross country. Keeping its weight as low as possible, this Factory Series version also comes complete with titanium hardware for a further 10g of weight savings.Super Lightweight Dropper Seat PostMeet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has classed it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it finally brings the word “shred” into the super-lightweight XC and Gravel conversation.Features: Upper Coating: Genuine Kashima Lower Coating: Anodised Hardware: Titanium Use: Cross Country (XC) and Gravel Type: Dropper Seat Post Spring Type: Coil Remote/Lever Included: No, sold separately (lightweight under-bar 1x lever design or classic 2x lever) Cable Routing: Internal only 128g lighter than 2021 Transfer Weight: 27.2x50mm Option: 327g; 27.2x70mm: 338g; 30.9/31.6x75mm Option: 342g/352g; 30.9/31.6x100mm Option: 347g/359gTechnologies: Factory Series: “Factory” says it all. The best-of-the-best technology Fox Suspension have to offer is available in Factory Series models with a buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. 70-85 degree seat angles are supported. 7mm and 7x9mm saddle rails supported. Compatible with 1x lever, which is Matchmaker, Shimano GRX, and I-SPEC EV compatible. (Sold separately). Factory post includes Ti hardware for additional 10g weight savings. Internal routing only. Lightweight design.Manufacturer's Part Numbers: 925-01-201 Black 350mm 27.2 x 50mm 925-01-200 Black 370mm 27.2 x 70mm 925-01-206 Black 355mm 30.9 x 75mm 925-01-204 Black 380mm 30.9 x 100mm 925-01-207 Black 355mm 31.6 x 75mm 925-01-205 Black 380mm 31.6 x 100mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Transfer SL Perf Elite Dropper PostThis dropper seatpost is part of the renowned Performance Elite series and it features a black anodised upper coating for an extra level of protection against wear and corrosion wherever your next adventure leads you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris.Super Light Done RightMeet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation.Performance Elite Series Dropper SeatpostPerformance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation.Features: Upper Coating: Black Anodised Lower Coating: Powdercoat Black Use: Mountain Bike (MTB), Cross Country (XC) and Gravel Cable Routing: Internal only Remote Included: No, available separately Weight: 27.2x50mm Option: 327g; 27.2x70mm Option: 338g; 30.9x75mm Option: 342g; 30.9x100mm Option: 347g; 31.6x75mm Option: 352g; 31.6x100mm Option: 359gTechnologies: Updated lightweight design. Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameter options to choose from. 50, 70, 75, and 100mm drop options to choose from. 70-85deg seat angles are supported. 7mm and 7x9 saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately).Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Vario Dropper Post Saddle Clamp KitThis kit features a replacement saddle clamp and mounting hardware, so you can easily swap out your old parts and breathe new life back into your setup. Specifically designed for use with the e.thirteen Vario dropper seatpost. Genuine e.thirteen spare parts.Features: Clamp Plates Material: Alloy Hardware Material: Steel T25 bolts with nuts Use: MTB Compatibility: Works with e.thirteen Vario dropper posts Included: x1 upper saddle rail plate, x1 lower saddle rail plate, x2 seatpost head screws/nuts Genuine e.thirteen spare partsManufacturer's Part Number: E13SP2007 BlackBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.