For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The all-new Highline 3 Dropper Post from Crank Brothers delivers infinite adjustment, smooth feel, and easy installation for any bike. It has a shorter insertion length so that it can fit more bikes, premium Trelleborg sealing to keep the post working perfectly for longer further helped by Igus LL-glide bearings and keys. The self-contained hydraulic cartridge delivers industry leading quality and reliability.Shorter insertion length to fit more bikesPremium Trelleborg sealingExclusive Igus LL-glide bearings and keysJagwire cable and housingSelf-contained hydraulic cartridge delivers industry leading quality and reliabilityInternal routing Quick connect mechanism for ease of cable installationLinear actuator for quick return speed2-bolt standard headRemote sold separatelySpecs 60mmMaterial: 7075-T6 aluminiumMax extended length: 270mm / 360mmMax insertion length: 270mm Overall: 174mm360mm Overall: 264mmMinimum stack height: 47mmSetback: 0Total post length: 270mm / 360mmWarranty: 2 yearsWeight: 27.2 (270mm overall): 400g / 27.2 (360mm overall): 440gSpecs 80mmMaterial: 7075-T6 aluminiumMax extended length: 100mmMax insertion length: 264mmMinimum stack height: 47mmSetback : 0Total post length: 380mmWarranty: 2 yearsWeight: 27.2: 460g / 30.9: 550g / 31.6: 560gSpecs 100mmMaterial: 7075-T6 aluminiumMax extended length: 241mmMax insertion length: 220mmMinimum stack height: 47mmSetback : 0Total post length: 370mmWarranty: 2 yearsWeight: 27.2: 480g / 30.9: 485g / 31.6: 503g / 34.9: 580gSpecs 125mmMaterial: 7075-T6 aluminiumMax extended length: 290mmMax insertion length: 245mmMinimum stack height: 47mmSetback : 0Total post length: 421mmWarranty: 2 yearsWeight: 27.2: 505g / 30.9: 525g / 31.6: 545g / 34.9: 635gSpecs 150mmMaterial: 7075-T6 aluminiumMax extended length: 337mmMax insertion length: 270mmMinimum stack height: 47mmSetback : 0Total post length: 469mmWarranty: 2 yearsWeight: 30.9: 565g / 31.6: 587g / 34.9: 685gSpecs 170mmMaterial: 7075-T6 aluminiumMax extended length: 378mmMax insertion length: 285mmMinimum stack height: 47mmSetback : 0Total post length: 505mmWarranty: 2 yearsWeight: 30.9: 586g / 31.6: 609g / 34.9: 735g
Funn UpDown Dropper SeatpostThe tough and fast operating UpDown Dropper Seatpost brings you the effortless control and smooth operation you need as you’re carving up the trails. Funn has made it with strong and durable AL7050 aluminium and equipped it with its RCR cartridge that can be easily serviced. This serviceable design enables you to reset the hydraulic circuit back to its factory settings.Remote Actuated and Internally Routed DropperReady for action, this stunning model uses internal cable routing which means you won't have to worry about any cables getting in the way of your ride. Funn has also equipped this version which a handlebar remote which means the freedom to adjust your seatpost height is only the flick of a lever away. This is the ultimate choice of upgrade for riders who want a reliable and versatile component for conquering every inch of the mountain.Features: Material: AL7050 Aluminium Cable Routing: Internal Compatibility: Internally routed frames only Remote Included: Yes, cable-actuated type Use: Mountain Bike (MTB) Adjustment: Proprietary RCR cartridge Lever Weight: 35g Post Weights: 30.9mm, 390mm total length, 125mm drop: 550g 30.9mm, 450mm total length, 150mm drop: 610g 31.6mm, 39mm total length, 125mm drop: 560g 31.6mm, 450mm total length, 150mm drop: 625gBuy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The all-new Highline 3 Dropper Post from Crank Brothers delivers infinite adjustment, smooth feel, and easy installation for any bike. It has a shorter insertion length so that it can fit more bikes, premium Trelleborg sealing to keep the post working perfectly for longer further helped by Igus LL-glide bearings and keys. The self-contained hydraulic cartridge delivers industry leading quality and reliability.Shorter insertion length to fit more bikesPremium Trelleborg sealingExclusive Igus LL-glide bearings and keysJagwire cable and housingSelf-contained hydraulic cartridge delivers industry leading quality and reliabilityInternal routing Quick connect mechanism for ease of cable installationLinear actuator for quick return speed2-bolt standard headRemote sold separatelySpecs 60mmMaterial: 7075-T6 aluminiumMax extended length: 270mm / 360mmMax insertion length: 270mm Overall: 174mm360mm Overall: 264mmMinimum stack height: 47mmSetback: 0Total post length: 270mm / 360mmWarranty: 2 yearsWeight: 27.2 (270mm overall): 400g / 27.2 (360mm overall): 440gSpecs 80mmMaterial: 7075-T6 aluminiumMax extended length: 100mmMax insertion length: 264mmMinimum stack height: 47mmSetback : 0Total post length: 380mmWarranty: 2 yearsWeight: 27.2: 460g / 30.9: 550g / 31.6: 560gSpecs 100mmMaterial: 7075-T6 aluminiumMax extended length: 241mmMax insertion length: 220mmMinimum stack height: 47mmSetback : 0Total post length: 370mmWarranty: 2 yearsWeight: 27.2: 480g / 30.9: 485g / 31.6: 503g / 34.9: 580gSpecs 125mmMaterial: 7075-T6 aluminiumMax extended length: 290mmMax insertion length: 245mmMinimum stack height: 47mmSetback : 0Total post length: 421mmWarranty: 2 yearsWeight: 27.2: 505g / 30.9: 525g / 31.6: 545g / 34.9: 635gSpecs 150mmMaterial: 7075-T6 aluminiumMax extended length: 337mmMax insertion length: 270mmMinimum stack height: 47mmSetback : 0Total post length: 469mmWarranty: 2 yearsWeight: 30.9: 565g / 31.6: 587g / 34.9: 685gSpecs 170mmMaterial: 7075-T6 aluminiumMax extended length: 378mmMax insertion length: 285mmMinimum stack height: 47mmSetback : 0Total post length: 505mmWarranty: 2 yearsWeight: 30.9: 586g / 31.6: 609g / 34.9: 735g
The all-new Highline 3 Dropper Post from Crank Brothers delivers infinite adjustment, smooth feel, and easy installation for any bike. It has a shorter insertion length so that it can fit more bikes, premium Trelleborg sealing to keep the post working perfectly for longer further helped by Igus LL-glide bearings and keys. The self-contained hydraulic cartridge delivers industry leading quality and reliability.Shorter insertion length to fit more bikesPremium Trelleborg sealingExclusive Igus LL-glide bearings and keysJagwire cable and housingSelf-contained hydraulic cartridge delivers industry leading quality and reliabilityInternal routing Quick connect mechanism for ease of cable installationLinear actuator for quick return speed2-bolt standard headRemote sold separatelySpecs 60mmMaterial: 7075-T6 aluminiumMax extended length: 270mm / 360mmMax insertion length: 270mm Overall: 174mm360mm Overall: 264mmMinimum stack height: 47mmSetback: 0Total post length: 270mm / 360mmWarranty: 2 yearsWeight: 27.2 (270mm overall): 400g / 27.2 (360mm overall): 440gSpecs 80mmMaterial: 7075-T6 aluminiumMax extended length: 100mmMax insertion length: 264mmMinimum stack height: 47mmSetback : 0Total post length: 380mmWarranty: 2 yearsWeight: 27.2: 460g / 30.9: 550g / 31.6: 560gSpecs 100mmMaterial: 7075-T6 aluminiumMax extended length: 241mmMax insertion length: 220mmMinimum stack height: 47mmSetback : 0Total post length: 370mmWarranty: 2 yearsWeight: 27.2: 480g / 30.9: 485g / 31.6: 503g / 34.9: 580gSpecs 125mmMaterial: 7075-T6 aluminiumMax extended length: 290mmMax insertion length: 245mmMinimum stack height: 47mmSetback : 0Total post length: 421mmWarranty: 2 yearsWeight: 27.2: 505g / 30.9: 525g / 31.6: 545g / 34.9: 635gSpecs 150mmMaterial: 7075-T6 aluminiumMax extended length: 337mmMax insertion length: 270mmMinimum stack height: 47mmSetback : 0Total post length: 469mmWarranty: 2 yearsWeight: 30.9: 565g / 31.6: 587g / 34.9: 685gSpecs 170mmMaterial: 7075-T6 aluminiumMax extended length: 378mmMax insertion length: 285mmMinimum stack height: 47mmSetback : 0Total post length: 505mmWarranty: 2 yearsWeight: 30.9: 586g / 31.6: 609g / 34.9: 735g
The all-new Highline 3 Dropper Post from Crank Brothers delivers infinite adjustment, smooth feel, and easy installation for any bike. It has a shorter insertion length so that it can fit more bikes, premium Trelleborg sealing to keep the post working perfectly for longer further helped by Igus LL-glide bearings and keys. The self-contained hydraulic cartridge delivers industry leading quality and reliability.Shorter insertion length to fit more bikesPremium Trelleborg sealingExclusive Igus LL-glide bearings and keysJagwire cable and housingSelf-contained hydraulic cartridge delivers industry leading quality and reliabilityInternal routing Quick connect mechanism for ease of cable installationLinear actuator for quick return speed2-bolt standard headRemote sold separatelySpecs 60mmMaterial: 7075-T6 aluminiumMax extended length: 270mm / 360mmMax insertion length: 270mm Overall: 174mm360mm Overall: 264mmMinimum stack height: 47mmSetback: 0Total post length: 270mm / 360mmWarranty: 2 yearsWeight: 27.2 (270mm overall): 400g / 27.2 (360mm overall): 440gSpecs 80mmMaterial: 7075-T6 aluminiumMax extended length: 100mmMax insertion length: 264mmMinimum stack height: 47mmSetback : 0Total post length: 380mmWarranty: 2 yearsWeight: 27.2: 460g / 30.9: 550g / 31.6: 560gSpecs 100mmMaterial: 7075-T6 aluminiumMax extended length: 241mmMax insertion length: 220mmMinimum stack height: 47mmSetback : 0Total post length: 370mmWarranty: 2 yearsWeight: 27.2: 480g / 30.9: 485g / 31.6: 503g / 34.9: 580gSpecs 125mmMaterial: 7075-T6 aluminiumMax extended length: 290mmMax insertion length: 245mmMinimum stack height: 47mmSetback : 0Total post length: 421mmWarranty: 2 yearsWeight: 27.2: 505g / 30.9: 525g / 31.6: 545g / 34.9: 635gSpecs 150mmMaterial: 7075-T6 aluminiumMax extended length: 337mmMax insertion length: 270mmMinimum stack height: 47mmSetback : 0Total post length: 469mmWarranty: 2 yearsWeight: 30.9: 565g / 31.6: 587g / 34.9: 685gSpecs 170mmMaterial: 7075-T6 aluminiumMax extended length: 378mmMax insertion length: 285mmMinimum stack height: 47mmSetback : 0Total post length: 505mmWarranty: 2 yearsWeight: 30.9: 586g / 31.6: 609g / 34.9: 735g
Shimano GRX 810 Dropper Post Disc Brake LeverFeaturing a streamlined and simplified design, the RX810 minimises stress and distractions, so you can hold onto your momentum while out on the road. Whether you're tackling a challenging downhill descent or exploring new unknown terrain conditions, you'll benefit from its integrated cable pulling system with a 9mm max cable stroke delivering instant stopping performance.Adjustable Dropper Post LeverPacked with some of the finest Shimano technologies around such as reach adjustment, you can fine-tune its feel to suit your hand size, type of riding and individual preferences. Taking braking action a step further, its Servo Wave technology makes initial pad travel fast, so little lever movement is needed to bring the pads into contact with the rotor. This increases your stopping power output rapidly and gives you improved control. Enjoy the freedom of being able to easily raise and lower your dropper based on the terrain conditions with minimal effort from this sleek model.Features: Use: Gravel, Road Oil: Mineral oil Reach Adjust: Tooled Clamp Band Inner Diameter: 23.8-24.2mm Recommended Brake Caliper: BR-RX810 Shifter Type: Single lever for adjustable seat post Servo Wave Action Dual Control Lever 9mm max cable stroke Integrated cable pulling systemTechnologies: Servo Wave Action: When you pull a Servo Wave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control. Reach Adjust: Brake lever is equipped with a reach adjust mechanism. The distance from handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.