2x Sealed bearing number: 607Z - 7mm Ø ID (Internal Diameter) 19mm Ø OD (Over All Diameter) 6mm Width2x Plain bearing (bushing) number: DU1 4F - 12mm Ø ID (Internal Diameter) 14mm Ø OD (Over All Diameter) 10mm WidthNuts:1x M7x1 11 deep right hand thread (left hand pedal) (to be fitted with a 11mm socket)1x M7x1 11 deep left hand thread (right hand pedal) (to be fitted with a 11mm socket)2x End cap: M20x1x102x External Shields2x Internal Rubber Seals
Replacement axles for your Vault pedals.Sizes : 9/16",NB:Axle with the groove and uses the right had thread nut is the left hand (non drive side) axle. This axle tightens into the crank - aniclockwise. / Axle without the groove and uses the left had thread nut is the right hand (drive side) axle. This axle tightens into the crank - clockwise..
Heavy duty, 6.3mm thick, single chain rings.Great for 4X and DJ, or any other single ring set up.These rings are designed for the DMR Extype and CRISIS cranks and use tough splines, not a single drive bolt, to transfer the power.SplineDrive rings lock to the crank using a Shimano pattern lock ring and spring clip.The 36t and 38t rings are drilled to take the DMR Sideplate bashguardColour: Black
Our brand new V12 design made from lightweight diecast Magnesium.70g lighter than the standard V12.,100mm Long, 95mm Wide [Platform] by 16mm High,350g per pair.
Freeride legend; Andreu Lacondeguy has been flying the DMR Vaults for a while now. To celebrate his 2014 Red Bull Rampage victory we offered him a signature colourway, the Lacon Vault pedal.Low profile for great clearance,Big platform for the biggest jumps,Oil slick finish,.Key Features:Large: 105mm x 105mm,Light: 430g per pair,Slim: 17mm concave foot bed,Tough: Extruded 6061 Aluminium and 4140 Cro-mo Steel axles (9/16"),Tuneable: 11 pins per pedal. Flip the pins to fine-tune the grip,Serviceable: – High load DU bush and cartridge bearing,Aggressive ‘moto’ pins also included.
The DMR Vault pedal is a tuneable flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setup, the DMR Vault pedal offers great stability and grip for the bumpiest of trails.Key Features:Large: 105mm x115mm,Light: 430g per pair,Slim: 17mm concave foot bed,Tough: Extruded 6061 Aluminium and 4140 Cro-mo Steel axles (9/16"),Tuneable: 11 pins per pedal. Flip the pins to fine-tune the grip,Serviceable: – High load DU bush and cartridge bearing.
Larger Platform AreaThe new DMR V12 pedal offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.Lower ProfileAt just 16mm deep the DMR V12 is as slim as we could go whilst still retaining our legendary concave feel.Lighter WeightThere is a 20% weight saving from the last V12 with the standard version weighing under 430g per pair and the Magnesium at just 350g.The DMR V12 pedal runs on fully sealed bearings and a cro-mo axle. All pins on the pedal are replaceable and tuneable for preferred grip.Sealed Bearings,Cro-Mo Axle,Classic DMR Concave,Platform: 95mm x 100mm..NB Torque setting at the Axle to Crank, for all the DMR Bikes pedal range, is 40 - 55Nm.
The DMR Brendog Vault pedal is now available in either Stealth or Ice.The DMR Vault pedal is a tuneable flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setup, the DMR Vault pedal offers great stability and grip for the bumpiest of trails.Also included spare moto pins with the DMR Brendog pedals, perfect for more aggressive riding and capable of WC level Downhill racing.Key Features:Stealth Black or Ice finish,Large: 105mm x 105mm,Light: 430g per pair,Slim: 17mm concave foot bed,Low Profile: For great clearance,Big Platform: For the biggest jumps,Tough: Extruded 6061 Aluminium and 4140 CroMo Steel axles,Tuneable: 11 pins per DMR Vault Brendog pedal. Flip the pins to fine-tune the grip,Serviceable: High load DU bush and cartridge bearing,Aggressive ‘MOTO’ pins also included.Specifications:Extruded and CNC Machined Aluminium body,4140 CroMo plated axle,105mm x 105mm Platform area,17mm Concave,22 replaceable Moto pins,430g per pair.
The current DMR Sidekick, Trailstar and Exalt frames all use a Swopout dropout specific to DMR frames. This allows you to change your dropout to your desired type on any of the framesVertical Swopout (Standard)Each of the Sidekick, Trailstar or Exalt comes equipped as standard with this Swopout.A 10mm vertical dropout with mech hanger. A direct replacement for your standard Swopout if you have an unfortunate stack. 12mm Bolt Through SwopoutEveryone likes a responsive feel to the rear of their bike. A bolt through hub is the ultimate way to achieve this. This Swopout will allow you to run a 12/135mm bolt through axle on the rear. DMR have the hubs to match on the hubs page. This setup is the choice of the pros.You can also upgrade the bolt through to a Maxle should you still which to run a quick release system, see the next Swopout along.10mm Horizontal SwopoutFor those you like single speed, for winter riding or prevention of wrecking expensive gears in a stack. This Swopout will allow you to run a 10mm hub single speed. If you need to keep things more secure than you quick release skewer will allow, check out the Chain Tug Mech Hanger for Swopout. 14mm Horizontal SwopoutSome of us play and ride hard, and need the equipment to mach.If you are the kind of person who hits the trails fast and hard, then consider a 14mm rear hub. This Swopout will allow you to run the super strong 14/135mm axle hub, DMR have the hub to mach this in our hubs section - single speed, again eliminating the risk of damage to gears.Maxle Bosses ONLY FOR USE WITH 12MM BOLT THRU SWOPOUT. These bosses bolt onto the 12mm Swopout allowing you to run a lighter and more user friendly Rockshox Maxle quick release axle with your DMR/Kinesis frame.
Heavy on strength but light on weight.14mm chain tugs designed to keep your 14mm axle hub in place within your 14mm horizontal dropout frame.Includes 10mm adapters so you can use a 10mm hub if needs be. 10mm chain tugs designed to keep your 10mm axle hub in place within your 10mm horizontal dropout frame. Adjustable from side to side at the point of contact with the dropout to keep the tugs perfectly square.
This kit makes it simple to ditch your gears and run a single speed set up without buying a new wheelKit includes alloy spacers, a lock nut and a 16t cogSinglespeed spacer kit is compatible with 1/8’’ x 1/2’’ Chains ONLY (BMX Chains).If you've got vertical dropouts, grab the Simple Tension Seeker and Spacer Kit combo pack and convert your bike in one hit.Size: 16tColour: Black87g all in
The DMR Death Grip is the second collaboration between DMR bikes and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendans design around it in super-soft Kraton compound. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the Death Grip is what we ended up with!’ Brendan FaircloughFEATURESTapered Core | No need for outer lock ring,Waffle and Knurl for grip,Mushroom for comfort,Available in Thin (29.8) or Thick (31.3),Available in Soft (20A Kraton) or Hard (25A Vexk).