◌DMR V11 Flat Mountain Bike PedalsAdopting the same large and stable platform as seen on DMR’s award-winning Vault flat pedals, the V11 model will keep your foot locked in place as you smash down the descents. Made from a tough reinforced nylon composite and a strong CrMo (Chromoloy) axle, they have 11 pins on each side so you can stay in control and get the power down when it’s time to accelerate.Flat Pedals with 22 Grip PinsThese flat mountain bike pedals bring you enduro trail-ready performance at a more affordable price point. With their concave shape, these pedals allow your feet to sit deep into the centre for supreme stability. V11’s durable glass-reinforced nylon body features eleven replaceable steel pins each side for rock-solid grip.Fully Serviceable PedalsAll pins are secured with captive locknuts for ultimate durability and the outer pins are Vault Moto pins that sink deep into your shoe, keeping your feet well and truly planted. V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance.Features: Material: Durable glass-reinforced Nylon body Axle Material: Strong 4140 CrMo (Chromoly) black steel axles with 6mm hex key fitting Platform Size: 105x105mm Axle Size: 9/16" Bearing Type: Sealed cartridge bearings Use: All Mountain, Enduro Low profile body with concave footbed 22 Tuneable pins with outer Moto Pins for serious grip (11 pins per side) Fully serviceable for long life Weight: 450g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR does performance composite.Presenting the V11 pedal. For those that favour the durability compliance and affordability of composite pedals the new benchmark choice from DMR has arrived! The V11 is moulded with the same proven shape as the multi award-winning Vault pedal providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe keeping your foot well and truly planted. V11 is fully rebuildable with the dedicated V11 service kit guaranteeing ride after ride with no-nonsense performance. • Durable glass reinforced nylon body.• Large platform area 105mm x 105mm.• Low profile body with concave foot bed.• Tuneable pins with outer Moto Pins for serious grip.• Strong 4140 Cro-mo black steel axles (9/16') with 6mm hex key fitting.• Fully serviceable for long life.• Weight 450g/pair.• Colours: Black Blue Green Orange Purple Red Turquoise Yellow. • Weight 450g/pair.• Platform area 105mm x 105mm.• 4140 Cro-mo black steel axles (9/16').
The DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.7075 heat treated and double butted Alloy31.8mm or 35mm clamp size780mm or 800mm width20mm/35mm rise options5 degree upsweep8 degree backsweepThe DMR alloy MK4 wingbar's shape was developed with their team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or droopy and the 8 degrees backsweep is optimal for stand-up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.
The DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.7075 heat treated and double butted Alloy31.8mm or 35mm clamp size780mm or 800mm width20mm/35mm rise options5 degree upsweep8 degree backsweepThe DMR alloy MK4 wingbar's shape was developed with their team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or droopy and the 8 degrees backsweep is optimal for stand-up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.
The DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.7075 heat treated and double butted Alloy31.8mm or 35mm clamp size780mm or 800mm width20mm/35mm rise options5 degree upsweep8 degree backsweepThe DMR alloy MK4 wingbar's shape was developed with their team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or droopy and the 8 degrees backsweep is optimal for stand-up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.
The DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.7075 heat treated and double butted Alloy31.8mm or 35mm clamp size780mm or 800mm width20mm/35mm rise options5 degree upsweep8 degree backsweepThe DMR alloy MK4 wingbar's shape was developed with their team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or droopy and the 8 degrees backsweep is optimal for stand-up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.
DMR Axe Bottom Brackets to fit the below bottom bracket standards. Both press fit BB's require the specific BB tool. Before fitting the BB92 BB, you must check your frame is within the required tolerances using the BB92 gauge. Please Note: The axe crank uses a specific 30mm bottom bracket axle and is only compatible with the Axe Bottom Bracket. Other 30mm crank systems and BB's are not cross compatible.BB92 pressfit68/73mm BSA threadedPlease note: Image for illustration purposes only
DMR Defy50 StemThee Defy50 Stem from DMR is the perfect choice for anyone wanting to upgrade their trail bike. Featuring a low stack height, a 50mm length and a 5-degree rise, this stem has been engineered to fit modern frames for enhanced control when tackling tough terrain. Made from CNC 6061 Alloy it is incredibly lightweight and also benefits from internal clamping bolts to prevent damage to your knees. Features: Material: CNC 6061 Alloy Top-Close clamp design Stem cap included Stack Height: 31mm Reach: 50mm Rise: 5mmDimensions: 95mm Long/55mm Wide 54mm TallWeight: 189gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Defy 50+ Mountain Bike StemThe ideal addition to your mountain bike (MTB), the Defy 50+ Stem features a durable 35mm clamping standard, for exceptionally smooth handling over tough terrains. Made from lightweight and hard-wearing CNC Machined 6061 Alloy it benefits from a low stack height, short 50mm length and low 5-degree rise. Designed for Modern GeometryDesigned for use with modern frames that feature longer top tubes for increased stability, the Defy 50+ offers precise control and is CNC machined to reduce weight. Also, to prevent knee injuries, the sides are further CNC machined to enable the clamping bolts to sit internally.Features: Material: CNC 6061 Alloy Top-Close clamp design Stem Cap Included: YesStack Height: 31mm Stem Angle:Reach: 50mm Rise: 5mm Dimensions: 95mm Long / 55mm Wide / 54mm TallWeight: 189gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Defy 50+ has a low stack height, a low 5-degree rise and with its short 50mm length, it combines well with modern bike frame's longer top tubes to give you precise control. For ease of installation there’s a “Top Close” clamp design and to prevent your knees knocking on external bolts, the steerer clamp bolts sit internally.
DMR Defy 50+ Mountain Bike StemThe ideal addition to your mountain bike (MTB), the Defy 50+ Stem features a durable 35mm clamping standard, for exceptionally smooth handling over tough terrains. Made from lightweight and hard-wearing CNC Machined 6061 Alloy it benefits from a low stack height, short 50mm length and low 5-degree rise. Designed for Modern GeometryDesigned for use with modern frames that feature longer top tubes for increased stability, the Defy 50+ offers precise control and is CNC machined to reduce weight. Also, to prevent knee injuries, the sides are further CNC machined to enable the clamping bolts to sit internally.Features: Material: CNC 6061 Alloy Top-Close clamp design Stem Cap Included: YesStack Height: 31mm Stem Angle:Reach: 50mm Rise: 5mm Dimensions: 95mm Long / 55mm Wide / 54mm TallWeight: 189gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Defy35 is the perfect stem for your Trail/All mountain build. It features a low stack height, Top-Close clamp design, 35mm reach and 5mm rise. It has wide clamping area for bar stability and stubby length to pair well with aggressive modern geometry. Features: ø31.8mm clamp (Defy35) and ø35mm clamp (Defy35+) available CNC 6061 Alloy Top-Close clamp design 27mm Stack height 35mm reach 5mm rise 176g Stem cap included SPECIFICATION ø31.8mm clamp (Defy35) and ø35mm clamp (Defy35+) available CNC 6061 Alloy 27mm Stack height 35mm reach 5mm rise 176g Stem cap included