DJD BD Driver 1/8", CNC Cr-mo - Fits Halo DJD BD Hub. 1/8" for SSCNC Steel Driver to fit all Halo DJD Bush hubs.,Driver includes Bush, Pawls and spring.,This driver takes screw on DJD Bush Drive cogs. It does not have a cog attached, cogs must be purchased separately.**Note: NOT compatible with old bearing type DJD hubs**
DJD BD Sprocket 1/8", CNC Cr-mo - Fits Halo DJD BD/S.Drv Hubs, 23x1mm Thread, 1/8" for SSHalo DJD BushDriver Sprockets,Screw-on for Halo DJD hubs with Mini Drive only.,Suits DJD BD or DJD SupaDrive hubs.,1/2x1/8" Steel.,09, 10, 11, 13, 14 & 16T,Thread = 23x1mm.,RHD only..*Note : not compatible with Sealed Bearing Driver Hub*
DJD Supa Drive DriverSize: 1/8",CNC Cr-mo,Fits Halo DJD SupaDrive Hub ONLY. ,Sprocket Not Included.
DJD Rear Bushed HubHalo's DJD BD hubs have become the DJ Disc Single Speed hub of choice for many riders.BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes.The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 "Bolt-in" Cr-Mo fixings and alloy caps. We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to ! 14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.,Forged & CNC finished body with slotted flanges.,Bush Driver with screw-on 11T cog.,Hollow Alloy axle with 6mm central hex.,Cr-Mo M10 Bolt-in fixings.,Super strong lightweight alloy axle.,2 sealed main body bearings and 1 hardened plastic driver bush.,Lightweight forged CNC finished alloy hub shell.,11T x 1/8" drivers sprocket fitted standard. ,(9,10,11,13,14,16t sprocket also available)..SpecificationsMaterial : Forged & CNC finished aluminium,Drillings : 32h or 36H,Bearings : 6902 cartridge bearings,Spacing : 135mm,Disc Mount : 6 bolt,Dimensions : C-L 34mm, C-R 35mm, flange 58mm,Colour : Red or Black,Weight : 326g.
Halo has developed a 12mm T-axle to work with the DJD BD hub for use with 12mm thru frames.Weight: 26g.These axles work with Halo DJD BD hubs and Halo DJD SupaDrive hubs. .
DJD S.DRIVE Dirt Jump Disc, Single Speed, 11T Bush Drive, SupaDrive 120T engagement, Bolt-in - DJD Supa Drive Rear HubDeveloped with the help of Sam Pilgrim (and chosen by Matt Jones, Blake Samson and Sam Reynolds) we have taken the best-selling DJD Bush Drive hub and improved it further by adding the proven 120 teeth triple wedge pawl mechanism of the Supa Drive hub. This provides positive and secure drive, a freewheel sound like no other and micro-notch engagement gaps for that perfect pedal pick-up.BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes. The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 bolt-in Cro-Mo fixings and alloy caps. We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to!14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.,Forged & CNC finished body with slotted flanges.,Bush Driver with screw-on 11T sprocket.,Hollow Alloy axle with 6mm central hex.,Cr-Mo M10 Bolt-in fixings.,14mm adaptors included..FeaturesSuper strong lightweight alloy axle.,2 sealed main body bearings and 1 hardened plastic driver bush.,3 wedge pawls ensure positive drive.,120 points of engagement.,Lightweight forged CNC finished alloy hub shell.,11T x 1/8" drivers sprocket fitted standard. ,9,10,11,13,14,16t sprockets also available.SpecificationsDrillings : 32 or 36H,Axle : Hollow Alloy axle with 6mm central hex,Disc Mount : 6 Bolt,Centre to Flange Center Left: 34mm, Center Right: 35mm,OLD 135mm,Dimensions : Flange Diameter: 58mm,Colour : Red or Black,Weight : 326g.
Halo DJD BD Axle kit:10mmx135mm Female threaded axle.Halo 10mm female bolt type alloy hollow axle(bolts not included) with 6mm hex broach in centre of axle.,Fits M10 x 1.5mm bolts.,Weight: 46g..
DJD BD Internal Drive Ring, Rear - Replacement Internal Drive ring for DJD BD hubs ONLYDJD Bush Drive ring,Internal Drive ring,30T.
If stubborn spockets mean that the DJD driver cannot be adequately held then this Workshop tool may be required.CNC Made from steel.Use as follows:Insert the tool securely into a bench vice.,Remove the driver body from the hub assembly.,Remove the 3 Pawls and spring.,Insert the Pawl area of the driver body into the Bench tool.,Use required chainwhip to remove the now securely held DJD driver body..
If stubborn sprockets mean that the DJD driver cannot be adequately held to unthread the sprocket... then, this Workshop tool may be required.CNC Made from steel.Use as follows;Insert the tool securely into a bench vice.,Remove the driver body from the hub assembly.,Remove the 3 Pawls and spring.,Insert the Pawl area of the driver body into the Bench tool.,Use required chainwhip to remove the now securely held DJD driver body.,